推 Yanten:看看是不是list內有把自己擋掉了的烏龍 03/08 00:16
推 pokitw:list 是空的@@ 依然無法下載 好怪異 03/08 00:39
推 kilinyo:使用正常 03/08 01:00
推 pojan:我昨天也這樣,完整移除再安裝就行了 03/08 14:31
推 pokitw:完整移除後又試了好多次..終於正常啦!感謝各位^^ 03/08 17:12
> -------------------------------------------------------------------------- <
作者: smartck () 看板: P2PSoftWare
標題: Re: [問題] PeerGuardian 2 故障了@@?
時間: Tue Apr 3 10:24:46 2007
最近在灌peerguardian時,P2P的名單下載都沒辦法匯到list裡面
總是出現下面的字
peerguardian is unable to load the list at:
http://peerguardian.sourceforge.net/lists/p2p.php
this could be due to an invalid/unrecognized format, or courruption when
downloading.
class utf8_error
utf-8 not convertable to utf-16
重灌好幾次都無法...
--
...我很懶
所以我的簽名檔是空白的...
--
※ 發信站: 批踢踢實業坊(ptt.cc)
◆ From: 140.112.99.156
> -------------------------------------------------------------------------- <
作者: pokitw (poki) 看板: P2PSoftWare
標題: Re: [問題] PeerGuardian 2 故障了@@?
時間: Tue Apr 3 10:51:10 2007
※ 引述《smartck ()》之銘言:
: 最近在灌peerguardian時,P2P的名單下載都沒辦法匯到list裡面
: 總是出現下面的字
: peerguardian is unable to load the list at:
: http://peerguardian.sourceforge.net/lists/p2p.php
: this could be due to an invalid/unrecognized format, or courruption when
: downloading.
: class utf8_error
: utf-8 not convertable to utf-16
: 重灌好幾次都無法...
近日也為此所苦,至官方網站也未能查出什麼原因,
但在官方的討論區裡,已有不少人出現類似情況!
原因大致是PHOENIXLABS的Server出了些問題,
以致於無法正確下載P2P list,用戶端重裝軟體是無解的!
可下載以下清單,手動加入用戶端的lists,
這份清單與P2P是完全相同的!
http://www.bluetack.co.uk/config/level1.zip
資料來源:http://0rz.tw/b62uL
--
※ 發信站: 批踢踢實業坊(ptt.cc)
◆ From: 59.126.180.183
推 smartck:謝謝 04/03 16:29
> -------------------------------------------------------------------------- <
作者: nkz593 (想到再寫) 站內: P2PSoftWare
標題: Re: [問題] PeerGuardian 2 故障了@@?
時間: Tue Apr 3 21:01:49 2007
延伸請個問題
我的pg2在驢子沒打開前
在程式的畫面裡會一直跳ip出來(剛安裝時不會)
感覺有點怪
另外在安裝目錄裡發現有個1G多的history.db檔,頗佔空間
感謝回復囉
※ 引述《pokitw (poki)》之銘言:
: ※ 引述《smartck ()》之銘言:
: : 最近在灌peerguardian時,P2P的名單下載都沒辦法匯到list裡面
: : 總是出現下面的字
: : peerguardian is unable to load the list at:
: : http://peerguardian.sourceforge.net/lists/p2p.php
: : this could be due to an invalid/unrecognized format, or courruption when
: : downloading.
: : class utf8_error
: : utf-8 not convertable to utf-16
: : 重灌好幾次都無法...
: 近日也為此所苦,至官方網站也未能查出什麼原因,
: 但在官方的討論區裡,已有不少人出現類似情況!
: 原因大致是PHOENIXLABS的Server出了些問題,
: 以致於無法正確下載P2P list,用戶端重裝軟體是無解的!
: 可下載以下清單,手動加入用戶端的lists,
: 這份清單與P2P是完全相同的!
: http://www.bluetack.co.uk/config/level1.zip
: 資料來源:http://0rz.tw/b62uL
--
※ 發信站: 批踢踢實業坊(ptt.cc)
◆ From: 61.62.183.57
> -------------------------------------------------------------------------- <
作者: pokitw (poki) 看板: P2PSoftWare
標題: Re: [問題] PeerGuardian 2 故障了@@?
時間: Tue Apr 3 21:42:29 2007
※ 引述《nkz593 (想到再寫)》之銘言:
: 延伸請個問題
: 我的pg2在驢子沒打開前
: 在程式的畫面裡會一直跳ip出來(剛安裝時不會)
: 感覺有點怪
: 另外在安裝目錄裡發現有個1G多的history.db檔,頗佔空間
: 感謝回復囉
是否您只單純安裝PG2,並未作任何設定更動?
程式預設值:顯示並紀錄 Allowed & Blocked Connections,
所以即使您未開啟P2P程式,上網的所有連線IP皆會紀錄,
相當於一個簡易防火牆的功能。
雖然封鎖與連線的紀錄,只是些純文字與IP,
但長期下來也會相當肥大!建議作以下設定:
開啟程式畫面後,選擇 Settings
1. Log Windows 類目下,將 Show allowed connections 設定取消
2. History 類目下,將 Log allowed connections 設定取消
3. Log allowed connections 右方的下拉式選單選取 Remove
右方 Every 0 Days (設定您欲移除紀錄的週期,若無特定需求請選1,每日刪除)
按下 Settings 畫面右下方的 Next -> (前往下個設定頁面)
第二個頁面的設定值因個人需求而異,
例如:是否開機自動啟動程式..等,請自行調整。
至於目前已累積的紀錄檔,可在 Protection 頁面下,
選取 Clear Log,可手動清除目前已累積的紀錄檔。
另外亦建議設定 HTTP is Allowed,允許列表內IP的 HTTP 連線。
--
※ 發信站: 批踢踢實業坊(ptt.cc)
※ 編輯: pokitw 來自: 59.126.180.183 (04/03 22:03)
推 nkz593:很詳細的設定,謝謝囉 04/03 23:24