Fw: [問題] TI用C遇到的問題~~

[fmdjyl (小D(滴))]

※ [本文轉錄自 C_and_CPP 看板 #1HE4hJBI ]

作者: fmdjyl (小D(滴)) 看板: C_and_CPP
標題: [問題] TI用C遇到的問題~~
時間: Thu Mar  7 16:07:45 2013

原本在51上跑~是正常的~~
但換到TI上...這段都說有問題.
已弄不出語法上有什麼問題???
麻煩懇請指教~~
先謝謝大家

錯誤點在:Show_String(1,&Name,0x06,XLevel+0x00)

出現訊息為:
Error[Pe167]: argument of type "unsignhar (*)[9]" is incompatible whit parameter of type
"unsigned char *"

===============================================
int main( void )
{
  unsigned char Name[]={1,1,1,1,1,1,1,1,0};
  for(;;)
  {
     Show_String(1,&Name,0x06,XLevel+0x00);
  }
}


unsigned char Ascii_1[5][5]={           // Refer to "Times New Roman" Font Database...
                                                //   Basic Characters

        {0x3E,0x51,0x49,0x45,0x3E},             //   ( 1)
        {0x00,0x42,0x7F,0x40,0x00},             //   ( 2)
        {0x42,0x61,0x51,0x49,0x46},             //   ( 3)
        {0x21,0x41,0x45,0x4B,0x31},             //   ( 4)
        {0x18,0x14,0x12,0x7F,0x10},             //   ( 5)
};

void Show_String(unsigned char a, unsigned char *Data_Pointer, unsigned char
b, unsigned char c)
{
unsigned char *Src_Pointer;


        Src_Pointer=Data_Pointer;

        Show_Font57(1,96,b,c);                  // No-Break Space
                                                //   Must be written first before the string start...

        while(1)
        {
                Show_Font57(a,*Src_Pointer,b,c);
                Src_Pointer++;
                c+=6;
                if(*Src_Pointer == 0) break;
        }
}

void Show_Font57(unsigned char a, unsigned char b, unsigned char c, unsigned
char d)
{
unsigned char *Src_Pointer;
unsigned char i;

        switch(a)
        {
                case 1:
                        Src_Pointer=&Ascii_1[(b-1)][0];
                        break;

        }
        Set_Start_Page(c);
        Set_Start_Column(d);

        I2C_Start();
        I2C_O(0x40);
        I2C_Ack();

        for(i=0;i<5;i++)
        {
                I2C_O(*Src_Pointer);
                I2C_Ack();
                Src_Pointer++;
        }
        I2C_O(0x00);
        I2C_Ack();

        I2C_Stop();
}

--
※ 發信站: 批踢踢實業坊(ptt.cc) 
◆ From: 60.251.176.110

※ 發信站: 批踢踢實業坊(ptt.cc)
※ 轉錄者: fmdjyl (60.251.176.110), 時間: 03/07/2013 16:08:08
推 ruemann:改成 &Name[0] 看看
推 kdjf:是直接 Name 吧
→ fmdjyl:已測試成功.把&去掉就可以~只是還不知道為什麼KEILC~51可以
→ fmdjyl:IAR的TI卻不行這樣寫 ~~~
→ fmdjyl:謝謝樓上幾位樓主的幫助~~萬般感謝~~~
→ Jhih8051:不同的compile會有差，個人覺得IAR比較嚴謹，NAME直接就
→ Jhih8051:是指向位址了，不用再加&
→ syura945:keil可以compile不代表結果是對的  這程式明顯寫錯