Re: [問題] 跑abaqus出現以下訊息...

[heavyheart (heavyheart)]

把OS從XP(32bit)換成win 7(64 bit)
再把RAM加到4G後...

常常跑一跑就自己關掉
然後顯示GUI detected error while waiting for ipc connection to close.
想請問是不是顯示卡的驅動程式造成這個問題...
因為總覺得顯示卡的驅動程式怪怪的 讓我跑起來比2G RAM時還要不順...orz
不知道有沒有人遇過這種問題?
謝謝!!


※ 引述《heavyheart (heavyheart)》之銘言：
: Abaqus/Standard has exited because there is insufficient memory available. A
: limit of 50 percent of physical memory was specified using the memory
: parameter. The physical memory available on the machine in use is 1918.42
: megabytes. The user should consider either increasing the memory available to
: Abaqus or switching to a machine with more memory.
: Abaqus/Standard Analysis exited with an error - Please see the  message file
: for possible error messages if the file exists.
: 想請問這樣要怎麼解決...
: 如果加RAM會有用嗎?
: 還是加RAM也不會有太大功用 必須簡化圖...
: 謝謝大家!!

--
※ 發信站: 批踢踢實業坊(ptt.cc) 
◆ From: 218.166.107.253
→ heavyheart:剛google了一下...發現要把hardware acceleration關掉
→ heavyheart:不過我找不到要去哪關...
→ heavyheart:後來解決囉! 在abaqus_v6.env最後加上一行
→ heavyheart:abaqus_no_hardware_acceleration=ON 就可以了
推 JW: 應該是顯卡的問題~請問原PO是用筆電嗎?
→ heavyheart:對 我是用筆電~