I just installed the ISO from 20041031
I mounted my compact flash card (vfat) and went
to rm a file and bewm. into some kind of kernel
debugger.
I didnt write all the numbers down, just the first line.
panic: assertion: ncp != NULL && 1 in nlookup
panic() at panic+0x84
panic() at panic+0x84
nlookup() at nlookup+0x176
kern_stat() at kern_stat+0xF
lstat() at lstat+0x35
syscall2(2F,2F,2F,num,num) at syscall2+0x246
Xinit0x80() at Xinit0x80+0x2A
Debugger("panic")
dmesg attached if it helps any....
Copyright (c) 2003, 2004 The DragonFly Project.
Copyright (c) 1992-2003 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993,
1994
The Regents of the University of California. All rights
reserved.
DragonFly 1.1-Stable #0: Sun Oct 31 13:23:53 GMT 2004
root@chlamydia.fs.ei.tum.de:/usr/obj/usr/src/sys/GENERIC
TSC clock: 2390225804 Hz, i8254 clock: 1193148 Hz
CPU: Intel(R) Pentium(R) 4 CPU 2.40GHz (2390.31-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0xf27 Stepping = 7
Features=0xbfebf9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
real memory = 534773760 (522240K bytes)
avail memory = 509100032 (497168K bytes)
Preloaded elf kernel "/kernel" at 0xc0660000.
Preloaded elf module "/modules/acpi.ko" at 0xc0660238.
Pentium Pro MTRR support enabled
md0: Malloc disk
pcibios: BIOS version 2.10
Using $PIR table, 8 entries at 0xc00fdf40
npx0: <math processor> on motherboard
npx0: INT 16 interface
Using XMM optimized bcopy/copyin/copyout
acpi0: <PTLTD RSDT> on motherboard
installed MI handler for int 9
acpi0: Power Button (fixed)
cpu0: <ACPI CPU (2 Cx states)> on acpi0
acpi_tz0: <Thermal Zone> on acpi0
acpi_tz1: <Thermal Zone> on acpi0
acpi_button0: <Power Button> on acpi0
acpi_button1: <Sleep Button> on acpi0
acpi_lid0: <Control Method Lid Switch> on acpi0
acpi_acad0: <AC Adapter> on acpi0
acpi_cmbat0: <Control Method Battery> on acpi0
acpi_ec0: <Embedded Controller: GPE 0x1e> port 0x66,0x62 on acpi0
pcib0: <Host to PCI bridge> at pcibus 0 on motherboard
pci0: <PCI bus> on pcib0
agp0: <SiS 645DX host to AGP bridge> mem 0xe8000000-0xebffffff at
device 0.0 on pci0
pcib1: <PCI to PCI bridge (vendor=1039 device=0001)> at device 1.0 on
pci0
pci1: <PCI bus> on pcib1
pci1: <ATI model 4c66 graphics accelerator> at 0.0 irq 11
isab0: <SiS 85c503 PCI-ISA bridge> at device 2.0 on pci0
isa0: <ISA bus> on isab0
fwohci0: <SiS 7007> mem 0xec000000-0xec000fff irq 11 at device 2.3 on
pci0
installed MI handler for int 11
fwohci0: OHCI version 1.0 (ROM=1)
fwohci0: No. of Isochronous channel is 4.
fwohci0: EUI64 00:01:24:10:32:0f:28:91
fwohci0: Phy 1394a available S400, 2 ports.
fwohci0: Link S400, max_rec 2048 bytes.
firewire0: <IEEE1394(FireWire) bus> on fwohci0
fwe0: <Ethernet over FireWire> on firewire0
if_fwe0: Fake Ethernet address: 02:01:24:0f:28:91
fwe0: MAC address: 02:01:24:0f:28:91
sbp0: <SBP-2/SCSI over FireWire> on firewire0
fwohci0: Initiate bus reset
fwohci0: node_id=0xc000ffc0, gen=1, CYCLEMASTER mode
firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me)
firewire0: bus manager 0 (me)
atapci0: <SiS 5591 ATA100 controller> port
0x1000-0x100f,0x374-0x377,0x170-0x177,0x3f4-0x3f7,0x1f0-0x1f7 at
device 2.5 on pci0
ata0: at 0x1f0 irq 14 on atapci0
installed MI handler for int 14
ata1: at 0x170 irq 15 on atapci0
installed MI handler for int 15
pci0: <unknown card> (vendor=0x1039, dev=0x7013) at 2.6 irq 11
pci0: <unknown card> (vendor=0x1039, dev=0x7012) at 2.7 irq 11
ohci0: <SiS 5571 USB controller> mem 0xec001000-0xec001fff irq 11 at
device 3.0 on pci0
usb0: OHCI version 1.0, legacy support
usb0: <SiS 5571 USB controller> on ohci0
usb0: USB revision 1.0
uhub0: SiS OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
ohci1: <SiS 5571 USB controller> mem 0xec002000-0xec002fff irq 11 at
device 3.1 on pci0
usb1: OHCI version 1.0, legacy support
usb1: <SiS 5571 USB controller> on ohci1
usb1: USB revision 1.0
uhub1: SiS OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhub2: Texas Instruments General Purpose USB Hub, class 9/0, rev
1.10/1.00, addr 2
uhub2: 7 ports with 7 removable, self powered
umass0: Neodio Multi-format Flash Controller, rev 1.10/1.00, addr 3
ums0: ARROW STRONG USB Mouse, rev 1.00/0.10, addr 4, iclass 3/1
ums0: 5 buttons and Z dir.
ohci2: <SiS 5571 USB controller> mem 0xec003000-0xec003fff irq 11 at
device 3.2 on pci0
usb2: OHCI version 1.0, legacy support
usb2: <SiS 5571 USB controller> on ohci2
usb2: USB revision 1.0
uhub3: SiS OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub3: 2 ports with 2 removable, self powered
pci0: <USB controller> at 3.3 irq 11
sis0: <SiS 900 10/100BaseTX> port 0x2000-0x20ff mem
0xec005000-0xec005fff irq 11 at device 4.0 on pci0
miibus0: <MII bus> on sis0
ukphy0: <Generic IEEE 802.3u media interface> on miibus0
ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
sis0: MAC address: 00:00:e2:a0:a0:fb
cbb0: <PCI-CardBus Bridge> at device 9.0 on pci0
cardbus0: <CardBus bus> on cbb0
pccard0: <16-bit PCCard bus> on cbb0
pci_cfgintr: 0:9 INTA routed to irq 4
installed MI handler for int 4
cbb1: <PCI-CardBus Bridge> at device 9.1 on pci0
cardbus1: <CardBus bus> on cbb1
pccard1: <16-bit PCCard bus> on cbb1
pci_cfgintr: 0:9 INTB routed to irq 4
orm0: <Option ROM> at iomem 0xc0000-0xcefff on isa0
pmtimer0 on isa0
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on
isa0
installed MI handler for int 6
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
installed MI handler for int 1
psm0: <PS/2 Mouse> irq 12 on atkbdc0
installed MI handler for int 12
psm0: model Generic PS/2 mouse, device ID 0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on
isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0: can't drain, serial port might not exist, disabling
sio1: can't drain, serial port might not exist, disabling
ppc0: parallel port not found.
installed MI handler for int 0
system power profile changed to 'economy'
Manufacturer ID: 71021200
Product version: 7.1
Product name: Atheros Communications, Inc. | AR5001-0000-0000 |
Wireless LAN Reference Card | 00 |
Functions: Network Adaptor, Memory
Function Extension: 02808d5b00
Function Extension: 0240548900
Function Extension: 02001bb700
Function Extension: 0280a81201
Function Extension: 0200366e01
Function Extension: 0200512502
Function Extension: 02006cdc02
Function Extension: 0280f93703
Function Extension: 0200a24a04
Function Extension: 0308
Function Extension: 040600032f123456
Function Extension: 0501
CIS reading done
cardbus1: <unknown card> (vendor=0x168c, dev=0x0013) at 0.0 irq 4
cbb1: CardBus card activation failed
ad0: 28615MB <FUJITSU MHR2030AT> [58140/16/63] at ata0-master UDMA100
acd0: CD-RW <QSI CD-RW/DVD-ROM SBW-161> at ata1-master PIO4
Mounting root from ufs:/dev/ad0s4a
cd0 at ata1 bus 0 target 0 lun 0
cd0: <QSI DVD/CDRW SBW-161 SX14> Removable CD-ROM SCSI-0 device
cd0: 16.000MB/s transfers
cd0: Attempt to query device size failed: NOT READY, Medium not
present
da0 at umass-sim0 bus 0 target 0 lun 0
da0: <Generic USB Storage-SMC 0090> Removable Direct Access SCSI-0
device
da0: 1.000MB/s transfers
da0: Attempt to query device size failed: NOT READY, Medium not
present
da1 at umass-sim0 bus 0 target 0 lun 1
da1: <Generic USB Storage-CFC 0090> Removable Direct Access SCSI-0
device
da1: 1.000MB/s transfers
da1: 61MB (125441 512 byte sectors: 64H 32S/T 61C)
da2 at umass-sim0 bus 0 target 0 lun 2
da2: <Generic USB Storage-MMC 0090> Removable Direct Access SCSI-0
device
da2: 1.000MB/s transfers
da2: Attempt to query device size failed: NOT READY, Medium not
present
da3 at umass-sim0 bus 0 target 0 lun 3
da3: <Generic USB Storage-MSC 0090> Removable Direct Access SCSI-0
device
da3: 1.000MB/s transfers
da3: Attempt to query device size failed: NOT READY, Medium not
present
-- stu --
[FAQ] Write Your Own Operating System
http://www.mega-tokyo.com/osfaq2