On Sun, 21 Nov 2004, Matthew Dillon wrote:
> Are you using HEAD or Stable ?
HEAD.
> Post your 'dmesg' and 'df' output.
Note: I think you can ignore the disklabel error messages, which
are due to NetBSD and OpenBSD partitions.
========================
DragonFly 1.1-CURRENT #22: Sun Nov 21 13:48:45 PST 2004
toor@k9.localnet:/usr/obj/usr/src/sys/K9
TSC clock: 1907339612 Hz, i8254 clock: 1193206 Hz
CPU: AMD Athlon(tm) XP 2600+ (1907.31-MHz 686-class CPU)
Origin = "AuthenticAMD" Id = 0x6a0 Stepping = 0
Features=0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
AMD Features=0xc0400000<AMIE,DSP,3DNow!>
real memory = 536805376 (524224K bytes)
avail memory = 515051520 (502980K bytes)
Preloaded elf kernel "/kernel" at 0xc045f000.
Preloaded elf module "/modules/acpi.ko" at 0xc045f1e8.
netsmb_dev: loaded
Pentium Pro MTRR support enabled
pcibios: BIOS version 2.10
Using $PIR table, 9 entries at 0xc00fdec0
npx0: <math processor> on motherboard
npx0: INT 16 interface
Using MMX optimized bcopy/copyin/copyout
acpi0: <VIA694 AWRDACPI> on motherboard
installed MI handler for int 9
acpi0: Power Button (fixed)
cpu0: <ACPI CPU (3 Cx states)> on acpi0
acpi_tz0: <Thermal Zone> on acpi0
acpi_button0: <Power Button> on acpi0
acpi_button1: <Sleep Button> on acpi0
pcib0: <Host to PCI bridge> at pcibus 0 on motherboard
pci0: <PCI bus> on pcib0
pcib1: <PCI to PCI bridge (vendor=1106 device=b099)> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
pci0: <SiS model 0325 VGA-compatible display device> at 9.0 irq 10
uhci0: <VIA 83C572 USB controller> port 0xd400-0xd41f irq 11 at device 16.0 on
pci0
installed MI handler for int 11
usb0: <VIA 83C572 USB controller> on uhci0
usb0: USB revision 1.0
uhub0: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1: <VIA 83C572 USB controller> port 0xd800-0xd81f irq 10 at device 16.1 on
pci0
installed MI handler for int 10
usb1: <VIA 83C572 USB controller> on uhci1
usb1: USB revision 1.0
uhub1: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2: <VIA 83C572 USB controller> port 0xdc00-0xdc1f irq 5 at device 16.2 on
pci0
installed MI handler for int 5
usb2: <VIA 83C572 USB controller> on uhci2
usb2: USB revision 1.0
uhub2: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
ehci0: <EHCI (generic) USB 2.0 controller> mem 0xe9040000-0xe90400ff irq 3 at
device 16.3 on pci0
installed MI handler for int 3
ehci_pci_attach: companion usb0
ehci_pci_attach: companion usb1
ehci_pci_attach: companion usb2
usb3: EHCI version 1.0
usb3: companion controllers, 2 ports each: usb0 usb1 usb2
usb3: <EHCI (generic) USB 2.0 controller> on ehci0
usb3: USB revision 2.0
uhub3: (0x1106) EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub3: 6 ports with 6 removable, self powered
isab0: <PCI to ISA bridge (vendor=1106 device=3177)> at device 17.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <VIA 8235 ATA133 controller> port 0xe000-0xe00f at device 17.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
installed MI handler for int 14
ata1: at 0x170 irq 15 on atapci0
installed MI handler for int 15
pcm0: <VIA VT8235> port 0xe400-0xe4ff irq 5 at device 17.5 on pci0
pcm0: <VIA Technologies VIA1612A AC97 Codec>
vr0: <VIA VT6102 Rhine II 10/100BaseTX> port 0xec00-0xecff mem
0xe9041000-0xe90410ff irq 11 at device 18.0 on pci0
miibus0: <MII bus> on vr0
ukphy0: <Generic IEEE 802.3u media interface> on miibus0
ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
vr0: MAC address: 00:0d:87:a2:ce:02
orm0: <Option ROM> at iomem 0xc0000-0xcffff on isa0
pmtimer0 on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
installed MI handler for int 1
psm0: failed to get data.
psm0: <PS/2 Mouse> irq 12 on atkbdc0
installed MI handler for int 12
psm0: model Generic PS/2 mouse, device ID 0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> on isa0
sc0: VGA <16 virtual consoles, flags=0x200>
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
installed MI handler for int 6
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
installed MI handler for int 4
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/16 bytes threshold
ppbus0: <Parallel port bus> on ppc0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
installed MI handler for int 7
installed MI handler for int 0
ad0: 76319MB <ST380021A> [155061/16/63] at ata0-master UDMA100
ad2: 42934MB <WDC WD450AA-00BAA0> [87233/16/63] at ata1-master UDMA66
acd0: CD-RW <R/RW 4x4x24> at ata1-slave PIO4
Mounting root from ufs:/dev/ad0s2a
ad2: raw partition size != slice size
ad2: start 75147408, end 87437951, size 12290544
ad2c: start 75147408, end 87437132, size 12289725
ad2s1: rejecting partition in BSD label: it isn't entirely within the slice
ad2s1: start 63, end 7373835, size 7373773
ad2s1d: start 0, end 87930863, size 87930864
ad2s1: rejecting partition in BSD label: it isn't entirely within the slice
ad2s1f: start 7373898, end 13687379, size 6313482
ad2s1: rejecting partition in BSD label: it isn't entirely within the slice
ad2s1g: start 70316505, end 87923744, size 17607240
ad2s1: rejecting partition in BSD label: it isn't entirely within the slice
ad2s1h: start 26571573, end 70316504, size 43744932
ad2s3: rejecting BSD label: raw partition offset != slice offset
ad2s3: start 13687380, end 26555445, size 12868066
ad2s3c: start 0, end 87930863, size 87930864
ad2: raw partition size != slice size
ad2: start 75147408, end 87437951, size 12290544
ad2c: start 75147408, end 87437132, size 12289725
ad2s1: rejecting partition in BSD label: it isn't entirely within the slice
ad2s1: start 63, end 7373835, size 7373773
ad2s1d: start 0, end 87930863, size 87930864
ad2s1: rejecting partition in BSD label: it isn't entirely within the slice
ad2s1f: start 7373898, end 13687379, size 6313482
ad2s1: rejecting partition in BSD label: it isn't entirely within the slice
ad2s1g: start 70316505, end 87923744, size 17607240
ad2s1: rejecting partition in BSD label: it isn't entirely within the slice
ad2s1h: start 26571573, end 70316504, size 43744932
ad2s3: rejecting BSD label: raw partition offset != slice offset
ad2s3: start 13687380, end 26555445, size 12868066
ad2s3c: start 0, end 87930863, size 87930864
========================================
$ df -h
Filesystem Size Used Avail Capacity Mounted on
/dev/ad0s2a 5.2G 4.1G 735M 85% /
/dev/ad0s11 7.7G 3.8G 3.3G 54% /opt
procfs 4.0K 4.0K 0B 100% /proc
========================================
> We desparately need to have ktrace output for a failed case to figure
> out where the problem is.
I'll keep trying!