--0-1045093214-1109579464=:82850
Content-Type: text/plain; charset=us-ascii
Content-Id:
Content-Disposition: inline
Hi,
I installed XFree86-4 from ports, but the same bug
with Xorg installed from pkgsrc.
If I run the 'X -configure' command to create a
default config file for X, the system clock speeds up.
I attached dmesg and scanpci output. The system
booted up with ACPI enabled, I think (I choosed the
default in boot menu).
I installed the system from
dfly-20041222-stable.iso.gz and uses the default
kernel and binaries.
__________________________________
Do you Yahoo!?
Yahoo! Mail - Helps protect you from nasty viruses.
http://promotions.yahoo.com/new_mail
--0-1045093214-1109579464=:82850
Content-Type: text/plain; name="dmesg.txt"
Content-Description: dmesg.txt
Content-Disposition: inline; filename="dmesg.txt"
Copyright (c) 2003, 2004 The DragonFly Project.
Copyright (c) 1992-2003 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
DragonFly 1.1-Stable #5: Wed Dec 22 12:51:50 PST 2004
root@:/usr/obj/usr/src/sys/GENERIC
TSC clock: 1000034379 Hz, i8254 clock: 1193180 Hz
CPU: AMD Duron(tm) processor (1000.04-MHz 686-class CPU)
Origin = "AuthenticAMD" Id = 0x670 Stepping = 0
Features=0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
AMD Features=0xc0440000<RSVD,AMIE,DSP,3DNow!>
real memory = 805240832 (786368K bytes)
avail memory = 771878912 (753788K bytes)
Preloaded elf kernel "/kernel" at 0xc0667000.
Preloaded elf module "/modules/acpi.ko" at 0xc06671e8.
Pentium Pro MTRR support enabled
md0: Malloc disk
pcibios: BIOS version 2.10
Using $PIR table, 9 entries at 0xc00fdee0
npx0: <math processor> on motherboard
npx0: INT 16 interface
Using MMX optimized bcopy/copyin/copyout
acpi0: <VT8371 AWRDACPI> on motherboard
installed MI handler for int 4
acpi0: Power Button (fixed)
cpu0: <ACPI CPU (3 Cx states)> on acpi0
acpi_button0: <Power Button> on acpi0
acpi_button1: <Sleep Button> on acpi0
pcib0: <Host to PCI bridge> at pcibus 0 on motherboard
pci0: <PCI bus> on pcib0
agp0: <VIA 82C8363 (Apollo KT133A) host to PCI bridge> mem 0xe0000000-0xe3ffffff at device 0.0 on pci0
pcib1: <VIA 8363 (Apollo KT133) PCI-PCI (AGP) bridge> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
pci1: <Matrox MGA G400 AGP graphics accelerator> at 0.0 irq 10
isab0: <VIA 82C686 PCI-ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <VIA 82C686 ATA100 controller> port 0xd000-0xd00f at device 7.1 on pci0
atapci0: Correcting VIA config for southbridge data corruption bug
ata0: at 0x1f0 irq 14 on atapci0
installed MI handler for int 14
ata1: at 0x170 irq 15 on atapci0
installed MI handler for int 15
uhci0: <VIA 83C572 USB controller> port 0xd400-0xd41f irq 11 at device 7.2 on pci0
installed MI handler for int 11
usb0: <VIA 83C572 USB controller> on uhci0
usb0: USB revision 1.0
uhub0: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhub0: port error, restarting port 1
uhub0: port error, giving up port 1
umass0: Generic Mass Storage Device, rev 1.10/1.00, addr 2
umass0: Get Max Lun not supported (STALLED)
uhci1: <VIA 83C572 USB controller> port 0xd800-0xd81f irq 11 at device 7.3 on pci0
usb1: <VIA 83C572 USB controller> on uhci1
usb1: USB revision 1.0
uhub1: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhub1: port error, restarting port 1
uhub1: port error, giving up port 1
pci0: <unknown card> (vendor=0x1106, dev=0x3057) at 7.4
ahc0: <Adaptec 2940 Ultra2 SCSI adapter> port 0xdc00-0xdcff mem 0xea104000-0xea104fff irq 11 at device 8.0 on pci0
aic7890/91: Ultra2 Wide Channel A, SCSI Id=7, 32/253 SCBs
pci0: <unknown card> (vendor=0x109e, dev=0x036e) at 9.0 irq 5
pci0: <unknown card> (vendor=0x109e, dev=0x0878) at 9.1 irq 5
xl0: <3Com 3c905C-TX Fast Etherlink XL> port 0xe000-0xe07f mem 0xea102000-0xea10207f irq 11 at device 11.0 on pci0
miibus0: <MII bus> on xl0
xlphy0: <3c905C 10/100 internal PHY> on miibus0
xlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
xl0: MAC address: 00:01:02:16:1e:08
pci0: <unknown card> (vendor=0x1013, dev=0x6003) at 13.0 irq 7
xl1: <3Com 3c905C-TX Fast Etherlink XL> port 0xe400-0xe47f mem 0xea105000-0xea10507f irq 10 at device 17.0 on pci0
miibus1: <MII bus> on xl1
xlphy1: <3c905C 10/100 internal PHY> on miibus1
xlphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
xl1: MAC address: 00:01:02:f7:08:e6
installed MI handler for int 10
orm0: <Option ROMs> at iomem 0xc0000-0xc87ff,0xcc000-0xcc7ff,0xcd000-0xcd7ff,0xce000-0xce7ff on isa0
pmtimer0 on isa0
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
installed MI handler for int 6
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
installed MI handler for int 1
psm0: <PS/2 Mouse> irq 12 on atkbdc0
installed MI handler for int 12
psm0: model IntelliMouse, device ID 3
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0: can't drain, serial port might not exist, disabling
sio1: can't drain, serial port might not exist, disabling
ppc0: parallel port not found.
installed MI handler for int 0
acpi_cpu: throttling enabled, 2 steps (100% to 50.0%), currently 100.0%
ad0: 39205MB <Maxtor 2F040J0> [79656/16/63] at ata0-master UDMA100
ad1: 39083MB <Maxtor 4D040H2> [79408/16/63] at ata0-slave UDMA100
Waiting 15 seconds for SCSI devices to settle
Mounting root from ufs:/dev/ad1s1a
da0 at umass-sim0 bus 0 target 0 lun 0
da0: <Generic Flash Disk 7.77> Removable Direct Access SCSI-2 device
da0: 1.000MB/s transfers
da0: 125MB (256000 512 byte sectors: 64H 32S/T 125C)
cd0 at ahc0 bus 0 target 3 lun 0
cd0: <HP CD-Writer+ 9200 1.0c> Removable CD-ROM SCSI-4 device
cd0: 10.000MB/s transfers (10.000MHz, offset 15)
cd0: Attempt to query device size failed: NOT READY, Medium not present
--0-1045093214-1109579464=:82850
Content-Type: text/plain; name="scanpci.txt"
Content-Description: scanpci.txt
Content-Disposition: inline; filename="scanpci.txt"
pci bus 0x0000 cardnum 0x00 function 0x00: vendor 0x1106 device 0x0305
VIA Technologies, Inc. VT8363/8365 [KT133/KM133]
pci bus 0x0000 cardnum 0x01 function 0x00: vendor 0x1106 device 0x8305
VIA Technologies, Inc. VT8363/8365 [KT133/KM133 AGP]
pci bus 0x0000 cardnum 0x07 function 0x00: vendor 0x1106 device 0x0686
VIA Technologies, Inc. VT82C686 [Apollo Super South]
pci bus 0x0000 cardnum 0x07 function 0x01: vendor 0x1106 device 0x0571
VIA Technologies, Inc. VT82C586A/B/VT82C686/A/B/VT8233/A/C/VT8235 PIPC Bus Master IDE
pci bus 0x0000 cardnum 0x07 function 0x02: vendor 0x1106 device 0x3038
VIA Technologies, Inc. USB
pci bus 0x0000 cardnum 0x07 function 0x03: vendor 0x1106 device 0x3038
VIA Technologies, Inc. USB
pci bus 0x0000 cardnum 0x07 function 0x04: vendor 0x1106 device 0x3057
VIA Technologies, Inc. VT82C686 [Apollo Super ACPI]
pci bus 0x0000 cardnum 0x08 function 0x00: vendor 0x9005 device 0x0010
Adaptec AHA-2940U2/U2W
pci bus 0x0000 cardnum 0x09 function 0x00: vendor 0x109e device 0x036e
Brooktree Corporation Bt878 Video Capture
pci bus 0x0000 cardnum 0x09 function 0x01: vendor 0x109e device 0x0878
Brooktree Corporation Bt878 Audio Capture
pci bus 0x0000 cardnum 0x0b function 0x00: vendor 0x10b7 device 0x9200
3Com Corporation 3c905C-TX/TX-M [Tornado]
pci bus 0x0000 cardnum 0x0d function 0x00: vendor 0x1013 device 0x6003
Cirrus Logic CS 4614/22/24 [CrystalClear SoundFusion Audio Accelerator]
pci bus 0x0000 cardnum 0x11 function 0x00: vendor 0x10b7 device 0x9200
3Com Corporation 3c905C-TX/TX-M [Tornado]
pci bus 0x0001 cardnum 0x00 function 0x00: vendor 0x102b device 0x0525
Matrox Graphics, Inc. MGA G400 AGP
--0-1045093214-1109579464=:82850--