Matthew Dillon schrieb:
> Try this:
>
> fetch http://apollo.backplane.com/DFlyMisc/fd01.patch
>
> It will be a little wonky but it should work. /dev/fd0 and /dev/fd0a
> should show up permanently. Other partitions/slices may show up
> if you fdisk/disklabel it, but only after you open() /dev/fd0 because
> the device driver does not detect floppy insertion and thus does not
> auto probe on floppy insertion.
Thanks, it fixes the panic and a quick test of tar'ing to/from the VM's
floppy works.
It does output "fd0: slice starts beyond end of the disk: rejecting it"
(4 times) and "fd0: Seek to cyl 0, but not really there (ST3 =
80<fault>)" messages.
If that can't be helped, I'd say commit it anyways.
Sascha
--
http://yoyodyne.ath.cx