看板 EarthScience 關於我們 聯絡資訊
關於GPS signals的東東 我看到書裡面的文章寫到: Each GPS satellite transmits two spread spectrum, L-band carrier signals-- an L1 signal with carrier frequency f1=1575.42MHz and an L2 signal with carrier frequency f2=1227.6MHz. These two frequencies are integral multiples f1=1540*f0 and f2=1200*f0 of a base frequency f0=1.023MHz. 為什麼上面所列的L1 and L2 signals 會和f0有一個倍數關係? 而f0=1.023MHz作為一個base frequency是有何用意? The L1 signal from each satellite uses binary phase-shift keying(BPSK), modulated by two pesudorandom noise (PRN) codes in phase quadrature, designated as the C/A-code and P-code. The L2 signal from each satellite is BPSK modulated by only the P-code. What is "binary phase-shift keying(BPSK)"?? What is "pesudorandom noise(PRN)"?? What are "C/A-code" and "P-code"?? 為何L1 signal有 C/A-code and P-code來modulate, 但對於L2 signal卻只有P-code?? thanks!! -- ※ 發信站: 批踢踢實業坊(ptt.csie.ntu.edu.tw) ◆ From: 140.112.249.236
seeback:我猜是大氣吸收輻射的頻率關係 推 61.228.36.181 05/13