看板 Electronics 關於我們 聯絡資訊
※ [本文轉錄自 comm_and_RF 看板] 作者: kidd0308 (小艾) 站內: comm_and_RF 標題: [問題] OC-192的問題 時間: Tue Jan 9 10:51:35 2007 an oc-192 system includes 1.A typical silica single-mode fiber.attenuation is 0.2 db/km at 1550nm and dispersion coefficient is 15ps/nm*km 2.laser diode #1.wavelength is 1550nm,linewidth is 0.02nm,and output power is10mw 3.laser diode #2.wavelength is 1550nm,linewidth is 2nm,and output power is10mw 4.photodiode.sensitivity is -30dbm 5.erbium-doped fiber amplifier.input power range is -20 to dbm, saturated output power is 15dbm,signal gain is 20db please answer the following questions 1.if there are no any optical amplifiers and laser diode #1 is used, estimate the maximum transmission distance 2..if there are no any optical amplifiers and laser diode #2 is used, estimate the maximum transmission distance 3.if there is an optical amplifier between transmitted and received ends and laser diode #1 is used,determine the location of this EDFA and estimate the maximum transmission distance 這題我不知道要怎麼算 有人可以幫我嗎 拜託大家 -- ※ 發信站: 批踢踢實業坊(ptt.cc) ◆ From: 140.127.112.20 -- ※ 發信站: 批踢踢實業坊(ptt.cc) ◆ From: 140.127.112.20
pow:拜託幫我解一下 差這一題作業就可以拿滿分了 01/09 11:36
kidd0308:樓上是高應大的嗎~~?? 01/09 13:15