看板 FB_current 關於我們 聯絡資訊
Thanks for the explanation! The patch didn't fix it though (as it probably only works against log = partitions). On Jul 11, 2011, at 4:45 PM, Matt Burke wrote: > On 07/06/11 16:44, Berczi Gabor wrote: >> For some reason FreeBSD can't boot automatically: > ... >> I have two pools, pool2 which is a mirrored zpool, and data being a >> raid-z pool. Note how the default should be "pool2:/boot/zfsloader". = How >> can I fix this? >=20 > The following applies to 8-STABLE from 2011-06-29. I believe -CURRENT = may > be identical, but don't know for certain. >=20 >=20 >> =46rom what I could tell from researching my similar problem (*), you = can > ignore the zpool bootfs property as well as the gpt bootme flag - = they're > not looked at by the boot process, at least not before the stage 3 = loader. >=20 > What happens is gptzfsboot simply tries to boot from the first zfs = pool it > finds. The only control you have is that the first drive it scans is = the > one it boots from. >=20 > If the BIOS booted from the disk with the raid-z pool, or if there is > something like a log partition for your raid-z pool before your boot = pool > on the disk (fixed with my patch), then gptzfsboot will try to load > /boot/zfsloader from the raid-z pool, whether or not it can see enough > vdevs to actually use the pool. If it can't run zfsloader it'll = pointlessly > try /boot/kernel/kernel from it before dumping you at the boot: = prompt. > That is why you see the "Default" showing as it does - it's more "Last > tried" than "Default". >=20 > My advice is to double-check which drive your BIOS is booting from = (make > sure it's one with 'pool2' on it), and if you've got a partition = belonging > to your 'data' pool on the disk (log, cache, etc), you could try = rebuilding > gptzfsboot with my patch providing you're aware that it's untested by > anyone other than myself and by using it you risk causing irreparable > damage to your pools. I hope not seeing as I'm running it myself, but = I've > had no feedback on it. >=20 >=20 > (*) = http://lists.freebsd.org/pipermail/freebsd-fs/2011-June/011882.html >=20 >=20 > HTH, >=20 > Matt. >=20 _______________________________________________ freebsd-current@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-current To unsubscribe, send any mail to "freebsd-current-unsubscribe@freebsd.org"