Re: Boot FreeBSD-current on macbook from USB stick ?

On Fri, Sep 23, 2011 at 1:56 PM, Poul-Henning Kamp <[e-mail]> wro=
te:
> In message <[e-mail]>, Eric McCorkle writes:
>
>>You can boot in legacy BIOS mode, which I do. =A0You have to create an
>>MBR/BSD label installation, as if you have a GPT, the firmware will do
>>what I described above. =A0Now, the mac firmware will wait 30 seconds
>>before doing the legacy BIOS boot. =A0You can get around this by holding
>>ALT at power on, and selecting "windows" (*sigh*).
>>
>>I have the following partition scheme:
>>
>>MBR---BSD---+---ZFS
>> =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 |
>> =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 +---Swap
>>
>>I do not use refit.
>
> That does not seem to work for me, I have USB stick with a
> NanoBSD on it, and it never gets recognized by the macbook,
> so there is no 'windows' to select...

What does gpart list say for the USB stick?
-Garrett
_______________________________________________
[e-mail] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-current
To unsubscribe, send any mail to "[e-mail]"