Gallium debugging and crash dumps

Hi:

If there is a better list to post this to please let me know.

I've started playing with VT and gallium. I boot on ZFS but have a UFS 
drive
and swap partition.  Anyone with idea's why I'm not getting any crash 
info?

I am guessing it is because the machine is not rebooting but locks up 
hard so
is there any extra debugging that can be turned on?

On the surface Gallium seems to be the root of the problem.

Here is my dump/swap config:

FreeBSD charon 10.0-STABLE FreeBSD 10.0-STABLE #0 r265914M: Wed May 14 
15:44:17 EDT 2014     mikej@charon:/usr/obj/usr/src/sys/VT  amd64

root@charon:/usr/home/mikej # swapinfo
Device          1K-blocks     Used    Avail Capacity
/dev/ada2s1a     16777216        0 16777216     0%
root@charon:/usr/home/mikej #

root@charon:/usr/home/mikej # dumpon  -l
ada2s1a
root@charon:/usr/home/mikej #

root@charon:/usr/home/mikej # grep dump /etc/rc.conf
dumpdev="AUTO"            # Device to crashdump to (device name, AUTO, 
or NO).
dumpdir="/data/crash"    # Directory where crash dumps are to be stored
root@charon:/usr/home/mikej #

root@charon:/usr/home/mikej # ls -lad /data/crash/
drwxr-xr-x  2 root  wheel  512 Apr 20 13:15 /data/crash/
root@charon:/usr/home/mikej #

http://216.26.158.189/Xorg.0.log

--mikej
_______________________________________________
[e-mail] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-current
To unsubscribe, send any mail to "[e-mail]"