看板 FB_questions 關於我們 聯絡資訊
Hi, I upgraded from 8.0 stable to 8.2 stable today. Now I can't connect to the network through the network adapter. I've set DCHP and SYNCDHCP in /etc/rc.conf and it worked in 8.0. It seems the dhclient problem. The ip address can't be obtained. When I run 'dhclient em0' manually, it shows that an ip address is leased. But actually it is not. The 'ifconfig em0' always shows an address of 0.0.0.0 with active status. $dhclient em0 DHCPREQUEST on em0 to 255.255.255.255 port 67 DHCPACK from 192.168.3.1 bound to 192.168.3.39 -- renewal in 43200 seconds But $ifconfig em0 em0: flags=8802<BROADCAST,SIMPLEX,MULTICAST> metric 0 mtu 1500 options=389b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,VLAN_HWCSUM,WOL_UCAST,WOL_MCAST,WOL_MAGIC> ether 6c:62:6d:03:16:31 inet 0.0.0.0 netmask 0xffffff00 broadcast 255.255.255.255 nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL> media: Ethernet autoselect (10baseT/UTP <half-duplex>) status: active Any help would be appreciated. Xihong _______________________________________________ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "freebsd-questions-unsubscribe@freebsd.org"