Am 24.05.2010 um 14:18 schrieb Jeremy Chadwick:
> 1) Were you using any "-j" flags during your make? If so, try without =
it.
> Sometimes these are known to cause oddities, even if occasionally.
Nope.
> 2) Make sure your system clock is correct and isn't drifting badly.
> Highly recommend you use ntpdate to set the clock initially, then run
> ntpd at all times.
# ntpq -p
remote refid st t when poll reach delay offset =
jitter
=
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
=3D=3D=3D
+lokschuppen.zs6 131.188.3.222 2 u 69 512 377 34.115 5.313 =
0.153
*jachthafen.hans 131.188.3.222 2 u 52 512 377 33.966 4.757 =
0.554
-ps.bucuo.de 192.53.103.108 2 u 185 512 377 39.567 7.895 =
0.268
-svr02.teleport- 73.120.242.92 2 u 187 512 377 44.572 6.949 =
0.542
-netzwerkteufel. 192.53.103.104 2 u 202 512 377 35.338 7.662 =
0.422
+qraftwerk.de 192.53.103.108 2 u 141 512 377 52.505 5.228 =
0.256
I'll try a new checkout next.
Stefan
--=20
Stefan Bethke <stb@lassitu.de> Fon +49 151 14070811
_______________________________________________
freebsd-stable@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-stable
To unsubscribe, send any mail to "freebsd-stable-unsubscribe@freebsd.org"