On 12.07.2010, at 17:06, John Baldwin wrote:
> Are you using Cx states other than C1 for the CPUs at all?
Not sure how to find out, but I did not change anything in the BIOS =
settings (if even possible) or through sysctl regarding cpu idle modes. =
Anyway, here's what I found:
# sysctl machdep.idle machdep.idle_available
machdep.idle: amdc1e
machdep.idle_available: spin, amdc1e, hlt, acpi,=20
Not sure if "amdc1e" qualifies for something "other than C1". I tried =
"hlt" once, which didn't make a difference IIRC. And if that's not what =
you needed, here's more:
# sysctl dev.cpu
dev.cpu.0.%desc: ACPI CPU
dev.cpu.0.%driver: cpu
dev.cpu.0.%location: handle=3D\_PR_.P001
dev.cpu.0.%pnpinfo: _HID=3Dnone _UID=3D0
dev.cpu.0.%parent: acpi0
dev.cpu.0.freq: 2786
dev.cpu.0.freq_levels: 2786/95000 2587/81800 2388/69811 2189/58977 =
1990/49240 1791/44316 995/22525
dev.cpu.0.cx_supported: C1/0
dev.cpu.0.cx_lowest: C1
dev.cpu.0.cx_usage: 100.00% last 500us
dev.cpu.1.%desc: ACPI CPU
dev.cpu.1.%driver: cpu
dev.cpu.1.%location: handle=3D\_PR_.P002
dev.cpu.1.%pnpinfo: _HID=3Dnone _UID=3D0
dev.cpu.1.%parent: acpi0
dev.cpu.1.cx_supported: C1/0
dev.cpu.1.cx_lowest: C1
dev.cpu.1.cx_usage: 100.00% last 500us
dev.cpu.2.%desc: ACPI CPU
dev.cpu.2.%driver: cpu
dev.cpu.2.%location: handle=3D\_PR_.P003
dev.cpu.2.%pnpinfo: _HID=3Dnone _UID=3D0
dev.cpu.2.%parent: acpi0
dev.cpu.2.cx_supported: C1/0
dev.cpu.2.cx_lowest: C1
dev.cpu.2.cx_usage: 100.00% last 500us
dev.cpu.3.%desc: ACPI CPU
dev.cpu.3.%driver: cpu
dev.cpu.3.%location: handle=3D\_PR_.P004
dev.cpu.3.%pnpinfo: _HID=3Dnone _UID=3D0
dev.cpu.3.%parent: acpi0
dev.cpu.3.cx_supported: C1/0
dev.cpu.3.cx_lowest: C1
dev.cpu.3.cx_usage: 100.00% last 500us
Markus=
_______________________________________________
freebsd-stable@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-stable
To unsubscribe, send any mail to "freebsd-stable-unsubscribe@freebsd.org"