Hi!
I'm not sure if the problem was solved, so...
On Thu, 5 Aug 2010 18:49:14 +0800 Alex V. Petrov wrote:
> smartctl -a /dev/ad8
> Device Model: WDC WD10EADS-00M2B0
> Firmware Version: 01.00A01
> 193 Load_Cycle_Count 0x0032 184 184 000 Old_age Always
> - 49237
> smartctl -a /dev/ad10
> Device Model: WDC WD10EADS-00L5B1
> Firmware Version: 01.01A01
> 193 Load_Cycle_Count 0x0032 200 200 000 Old_age Always
> - 24
> smartctl -a /dev/ad12
> Device Model: WDC WD10EADS-00M2B0
> Firmware Version: 01.00A01
> 193 Load_Cycle_Count 0x0032 200 200 000 Old_age Always
> - 91
>From the above info I'd say that you may try to play with load
cycles (set a bigger delay, etc.) with /dev/ad8.
--
WBR, Boris Samorodov (bsam)
Research Engineer, http://www.ipt.ru Telephone & Internet SP
FreeBSD Committer, http://www.FreeBSD.org The Power To Serve
_______________________________________________
freebsd-stable@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-stable
To unsubscribe, send any mail to "freebsd-stable-unsubscribe@freebsd.org"