At 04:44 PM 9/3/2010, Ben Schumacher wrote:
>All-
>
>It seems that something about the combination of FreeBSD 8.1 and
>apcupsd connecting to an APC Back-UPS RS 1500.
>
>Here's what I've got:
>1. FreeBSD 8.1 (source compiled up to RELENG_8_1 for security fixes)
>2. apcupsd 3.14.8 compiled from FreeBSD Ports
>3. APC Back-UPS RS 1500
Hi,
I am running RELENG_8 with such a ups.
8.1-STABLE FreeBSD 8.1-STABLE #1: Wed Sep 1 11:42:00 EDT 2010
% apcaccess
APC : 001,038,0989
DATE : 2010-09-04 07:32:09 -0400
HOSTNAME : backup3.sentex.ca
VERSION : 3.14.8 (16 January 2010) freebsd
UPSNAME : RAPIDS
CABLE : USB Cable
MODEL : Back-UPS RS 1500
UPSMODE : Stand Alone
STARTTIME: 2010-09-01 12:05:12 -0400
STATUS : ONLINE
LINEV : 117.0 Volts
LOADPCT : 38.0 Percent Load Capacity
BCHARGE : 100.0 Percent
TIMELEFT : 83.5 Minutes
MBATTCHG : 10 Percent
MINTIMEL : -1 Minutes
MAXTIME : 0 Seconds
SENSE : Medium
LOTRANS : 097.0 Volts
HITRANS : 132.0 Volts
ALARMDEL : 30 seconds
BATTV : 26.9 Volts
LASTXFER : Low line voltage
NUMXFERS : 1
XONBATT : 2010-09-01 16:27:30 -0400
TONBATT : 0 seconds
CUMONBATT: 26 seconds
XOFFBATT : 2010-09-01 16:27:56 -0400
SELFTEST : NO
STATFLAG : 0x07000008 Status Flag
MANDATE : 2007-09-07
SERIALNO : 8B0736R21784
BATTDATE : 2007-09-07
NOMINV : 120 Volts
NOMBATTV : 24.0 Volts
NOMPOWER : 865 Watts
FIRMWARE : 8.g9a.D USB FW:g9a
APCMODEL : Back-UPS RS 1500
END APC : 2010-09-04 07:32:37 -0400
I just leave the DEVICE line blank
UPSNAME STATN
UPSCABLE usb
UPSTYPE usb
DEVICE
LOCKFILE /var/spool/lock
ONBATTERYDELAY 7
BATTERYLEVEL 10
MINUTES -1
TIMEOUT 0
ANNOY 10
ANNOYDELAY 10
NOLOGON disable
KILLDELAY 2
NETSERVER on
NISIP 127.0.0.1
NISPORT 3551
EVENTSFILE /var/log/apcupsd.events
EVENTSFILEMAX 100
UPSCLASS standalone
UPSMODE disable
STATTIME 600
STATFILE /var/log/apcupsd.status
LOGSTATS off
DATATIME 600
FACILITY local2
UPSNAME RAPIDS
SENSITIVITY H
WAKEUP 010
SLEEP 000
RETURNCHARGE 00
BEEPSTATE T
SELFTEST 336
You dont need to do any symlinks in /dev
# usbconfig -d 5.2 dump_device_desc
ugen5.2: <Back-UPS RS 1500 FW:8.g9a.D USB FW:g9a American Power
Conversion> at usbus5, cfg=0 md=HOST spd=LOW (1.5Mbps) pwr=ON
bLength = 0x0012
bDescriptorType = 0x0001
bcdUSB = 0x0110
bDeviceClass = 0x0000
bDeviceSubClass = 0x0000
bDeviceProtocol = 0x0000
bMaxPacketSize0 = 0x0008
idVendor = 0x051d
idProduct = 0x0002
bcdDevice = 0x0106
iManufacturer = 0x0003 <American Power Conversion>
iProduct = 0x0001 <Back-UPS RS 1500 FW:8.g9a.D USB FW:g9a>
iSerialNumber = 0x0002 <8B0736R21784 >
bNumConfigurations = 0x0001
---Mike
--------------------------------------------------------------------
Mike Tancsa, tel +1 519 651 3400
Sentex Communications, mike@sentex.net
Providing Internet since 1994 www.sentex.net
Cambridge, Ontario Canada www.sentex.net/mike
_______________________________________________
freebsd-stable@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-stable
To unsubscribe, send any mail to "freebsd-stable-unsubscribe@freebsd.org"