--4Epv4kl9IRBfg3rk
Content-Type: text/plain; charset=us-ascii
Content-Disposition: inline
Content-Transfer-Encoding: quoted-printable
Quoth Stefan Walter on Monday, 15 November 2010:
> Hi,
>=20
> I've been using 8.1-RELEASE on this desktop machine for a few months
> already, but only now found the time to look at a couple of problems with
> snd_hda and suspend/resume it still has. Maybe someone here has hints to
> fix them - I'd be grateful to hear them.
>=20
> Audio with snd_hda(4) works, but only if loaded as a module AND only if I
> load the module AFTER booting. If I compile it into the kernel or add
> snd_hda_load=3D"YES" to /boot/loader.conf, dmesg shows the following:
>=20
> hdac0: HDA Codec #0: ATI RS690/780 HDMI
> pcm0: <HDA ATI RS690/780 HDMI PCM #0 HDMI> at cad 0 nid 1 on hdac0
> hdac1: HDA Codec #0: Realtek ALC885
> pcm1: <HDA Realtek ALC885 PCM #0 Analog> at cad 0 nid 1 on hdac1
> pcm2: <HDA Realtek ALC885 PCM #1 Analog> at cad 0 nid 1 on hdac1
> pcm3: <HDA Realtek ALC885 PCM #2 Digital> at cad 0 nid 1 on hdac1
>=20
> mixer(8) shows:
>=20
> Mixer vol is currently set to 75:75
> Mixer pcm is currently set to 75:75
>=20
> There is no audio in that case. Unloading and reloading the module (or
> just loading the module manually after the boot process) logs:
>=20
> hdac0: <ATI SB600 High Definition Audio Controller> mem 0xfe024000-0xfe02=
7fff irq 16 at device 20.2 on pci0
> hdac0: HDA Driver Revision: 20100226_0142
> hdac0: [ITHREAD]
> hdac0: HDA Codec #0: Realtek ALC885
> hdac1: <ATI (Unknown) High Definition Audio Controller> mem 0xfdffc000-0x=
fdffffff irq 19 at device 5.1 on pci1
> hdac1: HDA Driver Revision: 20100226_0142
> hdac1: [ITHREAD]
> hdac1: HDA Codec #0: ATI RS690/780 HDMI
> pcm0: <HDA Realtek ALC885 PCM #0 Analog> at cad 0 nid 1 on hdac0
> pcm1: <HDA Realtek ALC885 PCM #1 Analog> at cad 0 nid 1 on hdac0
> pcm2: <HDA Realtek ALC885 PCM #2 Digital> at cad 0 nid 1 on hdac0
> pcm3: <HDA ATI RS690/780 HDMI PCM #0 HDMI> at cad 0 nid 1 on hdac1
>=20
> mixer then shows:
>=20
> Mixer vol is currently set to 75:75
> Mixer pcm is currently set to 75:75
> Mixer speaker is currently set to 75:75
> Mixer line is currently set to 75:75
> Mixer mic is currently set to 0:0
> Mixer mix is currently set to 0:0
> Mixer rec is currently set to 75:75
> Mixer igain is currently set to 0:0
>=20
> Audio then seems to work fine. (Plugging earphones into the computer's
> case's front plugs doesn't do anything, though - audio still comes from
> the speakers attached to the plug at the back of the case. Any ideas about
> that?) Loading snd_hda from a startup script would probably work, but I
> guess that's not the way it was meant to work.
>=20
I had the same problem, but a later update to 8.1-STABLE seems to have
fixed it.
--=20
Sterling (Chip) Camden | sterling@camdensoftware.com | 2048D/3A978E4F
http://camdensoftware.com | http://chipstips.com | http://chipsquips=
..com
--4Epv4kl9IRBfg3rk
Content-Type: application/pgp-signature
Content-Disposition: inline
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.11 (FreeBSD)
iQEcBAEBAgAGBQJM4WU0AAoJEIpckszW26+Rsg8H/2J7yQ8ZxdO6Ax6bOl/aGz/o
CcTwFmYoiSyUblWWRQIfHEFVWePkpKWDbeBOT0XPhE1tzGHlSlgkDip0k4Gyhso8
mEHspTW/EBnOGWFVZWsqxGNOclv2Jc9YIT7oraog1oeRUZLecYgPwzCNoESdxBqb
oYg7hOIsjGlgiidcM6Dh9W5BuZc0XJ/WFwnUgXc3c0g7YnJRZBAR/IBCeVITSqbv
WFEXQlM86pMeoE0/b1yA6xdvNT/23lbWOP93Govm4FzESP5rk1MjUj/2hpXGuGHe
/co9vpPYcyXXf6LsMNvuAi6ded5G9F/86H+RghVN9IWtpk/6Al2WYeOmqzwVRXQ=
=SkBn
-----END PGP SIGNATURE-----
--4Epv4kl9IRBfg3rk--