Re: Freebsd 10 install kernel not booting.

Try this?
gpart bootcode -b /mnt2/boot/boot0 da0
gpart bootcode -b /mnt2/boot/boot1 /dev/da0s1
gpart set -a active -i 1 da0

--
Regards.
By: Haowu Ge; PGP:B7C9977A
WWW: https://www.7axu.com/



2014-04-11 21:54 GMT+08:00 Troyax <[e-mail]>:

> Hi,
>
> > Hello, since there's no answer yet, and it seems to be a bootloader
> related problem, would you try the following?
> >  * Create a 10.0 memory stick
> >  * From your 9.2 environment, copy the bootcode to the memory stick:
> >    # gpart bootcode -b /boot/boot da0
> >  * Try and see if it boots
>
> I have just tried your suggestion, but the result is the same. To be more
> precise, BTX loader 1.02 seems to launch the loader correctly; but it stops
> (and reboots the machine) very early on loading the kernel.
>
> Is there a way to try to build and boot a fbsd10 kernel with the same
> option than my current (and working) fbsd9.2 kernel?
>
> Thanks for any tips,
> Troyax.
>
> _______________________________________________
> [e-mail] mailing list
> http://lists.freebsd.org/mailman/listinfo/freebsd-amd64
> To unsubscribe, send any mail to "[e-mail]"
>
_______________________________________________
[e-mail] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-stable
To unsubscribe, send any mail to "[e-mail]"