看板 FB_stable 關於我們 聯絡資訊
For an unscientific test, tcpdump -i bce1 for ~5 seconds gave these stats: 321 packets captured 53776 packets received by filter 52703 packets dropped by kernel tcpdump -i mxge0 gave these stats: 17 packets captured 19 packets received by filter 0 packets dropped by kernel For the switch end of mxge0: HP-E2910al-48G# show uptime 0030:15:06:05.60 HP-E2910al-48G# show interfaces a1 Status and Counters - Port Counters for port A1 Name : Redwing 10G MAC Address : 68b599-954a8f Link Status : Up Totals (Since boot or last clear) : Bytes Rx : 2,312,764,644 Bytes Tx : 3,924,158,811 Unicast Rx : 202,711,900 Unicast Tx : 250,819,176 Bcast/Mcast Rx : 42,603 Bcast/Mcast Tx : 439,196 Errors (Since boot or last clear) : FCS Rx : 0 Drops Tx : 0 Alignment Rx : 0 Collisions Tx : 0 Runts Rx : 0 Late Colln Tx : 0 Giants Rx : 0 Excessive Colln : 0 Total Rx Errors : 0 Deferred Tx : 0 Others (Since boot or last clear) : Discard Rx : 0 Out Queue Len : 0 Unknown Protos : 0 Rates (5 minute weighted average) : Total Rx (Kbps) : 49,816 Total Tx (Kbps) : 61,824 Unicast Rx (Pkts/sec) : 305 Unicast Tx (Pkts/sec) : 404 B/Mcast Rx (Pkts/sec) : 0 B/Mcast Tx (Pkts/sec) : 0 Utilization Rx : 00.49 % Utilization Tx : 00.61 % HP-E2910al-48G# Switch has been up 30 days, no counters have been cleared Bob Healey Systems Administrator Biocomputation and Bioinformatics Constellation and Molecularium healer@rpi.edu (518) 276-4407 On 7/8/2014 9:25 AM, Kurt Jaeger wrote: > Hi! > >> I've been running one of these machines without pf, and it has ceased >> responding on all interfaces (mxge and bce). >> The console still works fine > Is a tcpdump on one of the interfaces seeing any traffic ? arp ? multicast ? > > Is a tcpdump seeing any outgoing packets if you send them ? > > If you plug in a cross cable to some other host, does it see > bytes on the interface if you try to send traffic ? > > Does > > ifconfig <if> down > ifconfig <if> up > > help ? Is the switch still seeing a link ? Does it change if you > ifconfig down ? > > Does it change if you unplug and re-plug the cable ? > _______________________________________________ freebsd-stable@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-stable To unsubscribe, send any mail to "freebsd-stable-unsubscribe@freebsd.org"