作者Ertkkpoo (water)
看板Grad-ProbAsk
標題[理工] [熱力]-control volume
時間Mon Sep 20 23:21:53 2010
大家好
我想請教熱力學當中的control volume和control mass的差別
以前我的認定就是封閉系統就是control mass(系統總質量固定)
而固定空間中某一區域,探討fluid的流經,為control volume(系統體積固定)
不過我之前看到有一個題目,就是對於一個room中的空氣加熱
而這個room是沒有封起來的,會因為加熱造成內部的空氣跑走
那如果我以加熱前的room中的空氣為系統,那他是屬於control volume
還是control mass呢?
因為這樣好像牽涉到我的系統的取決
如果我是以這個空間room為系統,那應該就是control volume
那萬一我是針對這些內部的空氣分子當作系統,那應該就是control mass
因為當初我是以control volume去分析感覺很容易
但若是用control mass去做不知道能不能做?我不太清楚該如何下手
說一下我看到那題目,
A 4-m*5-m*7-m room is heated by the rediator of a steam heating system.
The steam radiator transfers heat at a rate of 12500 kJ/h and a 100-W
fan is used to distribute the warm air in the room.The heat loss from
the room are estimated to be at a rate of about 5000 kJ/h.
If the initial temperature of the room air is 10℃, determine how long
it will take for the air temperature to rise to 20℃.
Assume constant specific heats at room temperature.
謝謝大家
--
※ 發信站: 批踢踢實業坊(ptt.cc)
◆ From: 219.70.213.203
※ 編輯: Ertkkpoo 來自: 219.70.213.203 (09/20 23:33)
推 ntust661:控質不一定要總體積一樣喔 09/20 23:41
→ Ertkkpoo:所以是我原先認知有誤?那請問應該如何解釋呢? 09/20 23:53
推 gomenba:這題的系統會有質量進出 應該不能使用C.M.? 09/21 22:30
→ gomenba:如果以內部空氣分子來看那就脫離古典熱力學了 一點看法 09/21 22:31
→ gomenba:您參考看看@@ 09/21 22:31