[FON+]PCB + console線

[Splash5 (史不拉雞五)]

下午收到
馬上拆開來看看電路.. 這次拆開需要星型起子T07 (手邊剛好只有T07合用)
若要購買星型起子建議帶著fon+去測試合不合用

相機不好 請見諒

http://0rz.tw/d32Yv 正面
http://0rz.tw/022Wx 背面
http://0rz.tw/d32Yw 主要處理器跟記憶體

console線 pinout
http://0rz.tw/5a2X4

參數設定跟一代機一樣

+Ethernet eth0: MAC address
IP: 192.168.1.1/255.255.255.0, Gateway: 0.0.0.0
Default server: 192.168.1.254

RedBoot(tm) bootstrap and debug environment [ROMRAM]
OpenWrt certified release, version 1.1 - built 22:32:28, May  7 2007

Copyright (C) 2000, 2001, 2002, 2003, 2004 Red Hat, Inc.

Board: FON 2201
RAM: 0x80000000-0x81000000, [0x80040290-0x80fe1000] available
FLASH: 0xa8000000 - 0xa87f0000, 128 blocks of 0x00010000 bytes each.
== Executing boot script in 2.000 seconds - enter ^C to abort
RedBoot> fis load -b 0x80100000 loader
RedBoot>  go 0x80100000
Failsafe loader v0.2

Looking for board config data... found at offset 0xa87f0000
Reset button GPIO: 6
Reading flash from 0xa8040000 to 0xa825b9a3... done.
Verifying CRC... OK - 0xfca00907
Uncompressing Linux... Ok, booting the kernel.
[sighandler]: No more events to be processed, quitting.
[cleanup]: Waiting for children.
[cleanup]: All children terminated.
Unlocking rootfs ...
Could not open mtd device: rootfs
switching to jffs2

init started:  BusyBox v1.4.1 (2007-06-18 20:30:16 UTC) multi-call binary
.
.
.

--
※ 發信站: 批踢踢實業坊(ptt.cc)
◆ From: 218.167.188.35
※ 編輯: Splash5         來自: 218.167.188.35       (08/18 19:10)
※ 編輯: Splash5         來自: 218.167.188.35       (08/18 19:10)
→ casko:那個console腳是不是變粗了 杜邦頭還可以接嗎
→ Splash5:還是杜邦頭阿..
→ Splash5:現在的問題是進了console沒辦法切進shell?..
推 casko:確定是0x80100000嗎
推 Splash5:ram是16Mbytes 所以0x80000000~0x81000000 應該是沒錯
→ Splash5:剛剛玩了一下 發現nds用wep連線會讓fon+ reset orz..
→ Splash5:然後用open system無法自動分配到ip..
※ 編輯: Splash5         來自: 218.167.188.35       (08/19 02:33)
※ 編輯: Splash5         來自: 218.167.188.35       (08/19 02:33)
→ Splash5:我搞錯四樓的意思了 0x80100000 是指 go 0x80100000吧..
→ Splash5:這邊是直接從console輸出抓下來的.. 應該是沒錯