推 JupIte:有磚的風險實在恐怖，將來LINUX應該可以直接播放~ 10/02 07:43
不管你是家裡沒有網路
或是有無法明說的原因無法使用 PS3 上網啟動 ATRAC 和 WMA 的播放功能,
在這邊提供一個可以離線啟動的方法,
注意下面的修改方式會修改到 PS3 登錄檔,
有可能讓你的 PS3 變成一塊"漂亮的磚頭"
1. 使用破解棒啟動你的 PS3
2. 使用 FTP 下載位於 /dev_flash2/etc/ 下的 xRegistry.sys 檔案到你的電腦
3. 開啟 xRegistry.sys Editor (下載連結 http://stoker25.com)
4. 載入 xRegistry.sys ([File]=>[Open]),找到
/setting/music/atracActivation
/setting/music/wmaActivation
把 Vaule 由 00000000 改成 00000001 並按下 [Save]
然後選 [File]=>[Close]
5. 把修改好的 xRegistry.sys 複製到隨身碟,然後接到 PS3 上
6. 用 ComgenieAwesomeFilemanager 把隨身碟上的 xRegistry.sys 覆蓋下面兩個檔案
/_dev_flash2/etc/xRegistry.sys
/_dev_flash2/etc/backup/xRegistry.sys
注意要先按 [select] 啟動高級模式才能覆蓋
========================
原文連結 : http://www.ps3hax.net/showthread.php?p=122026
If you are using Jailbreak, then you have to completely block PSN (by using
non-working PS3 DNS network settings and/or blocking the MAC with a router)
to prevent your PS3 from sending logs to Sony. That means you unfortunately
can't enable ATRAC and WMA playback online. Not to worry, now there is a way
to activate both offline:
Transfer your xRegistry.sys from /dev_flash2/etc/ to your PC (for instance
via FTP). Get xRegistry.sys Editor 0.75 at http://stoker25.com
Load your xRegistry.sys and edit the following values:
/setting/music/atracActivation
Checksum: 8DC5 Value: 00000001 Flags: 0000
/setting/music/wmaActivation
Checksum: 814B Value: 00000001 Flags: 0000
Save the file, and transfer it back to your PS3, overwriting the original
files in
/_dev_flash2/etc/
and
/_dev_flash2/etc/backup/
That's it, you can now play ATRAC (which afaik is needed for PSP remote play)
and WMA.
Thanks to stoker25 for his reg editor!
--
※ 發信站: 批踢踢實業坊(ptt.cc)
◆ From: 114.32.118.136