Re: [課業] 關於實驗四、五之PSpice模擬及相關問題

[santana111 ()]

: 4.歡迎有興趣的同學去查詢一下，何謂Dynamic Range?


Dynamic Range
The dynamic range is often represented as a log ratio of well depth to the
readout noise in decibels. For example, a system with a well depth of 85,000
electrons and a readout noise of 12 electrons would have a dynamic range = 20
log (85,000/12), or 77dB. The higher the number the better.

This ratio also gives an indication of the number of digitization levels that
might be appropriate for a given sensor. A sensor with a well depth of 35,000
electrons and with 15 electrons of read noise would yield a ratio of
35,000/15=2333. Unless there is a desire to resolve this noise with a 16 bit
system into 65,536 gray shades, a 12 bit system with 4096 levels would be
more than adequate for this sensor. In this case, about 2 counts of noise
would be digitized with the signal. For a KAF-1301e, which has a well depth
of 150,000 electrons and 15 electrons read noise, the ratio becomes 10,000,
or 80dB. This sensor would be most suited for 14 bit digitization (16384
levels). For the SITe-based AP7, with a well depth of 350,000 electrons and
15 electrons of noise, the ratio becomes 23,333, or 87dB. Digitization to 16
bits is appropriate in this case. The typical values achieved for the AP7b
with the SITe CCD is a noise of 9e- and a digitized well depth of 300Ke-.
This yields a dynamic range of 33.3K:1 or 90.4dB, OR just over 15 bits.


是這個嗎???


--
※ 發信站: 批踢踢實業坊(ptt.cc) 
◆ From: 140.112.239.239
推 taeelab:Excellent...但是還有另外一個定義喔！
推 danielko:讚喔~
→ danielko:聰明!!!
推 dehyuga:樓上的很好笑