推 johnnyaiba :把SSD拿來載BT 真有你的...... 08/21 18:34
→ terry77720 :載BT 當然壞得快 08/21 19:07
→ felaray :真勇者XD 08/21 19:10
→ meishan31 :不知道剩餘空間跟流量是多少 08/21 19:45
推 ultratimes :不，這叫三年保盡量操(無誤) 08/21 20:15
→ ultratimes :SSD絕對不要拿來放資料檔案，只會放主程式檔 08/21 20:16
推 PatlaborGao :現在SSD保固長，跟傳統硬碟比，我也寧可用它養動物 08/21 20:33
對了，這邊備註，在重開機之前有使用 SSDLife 確認壽命
跳出來是 100% health 才重開機
※ 編輯: geff 來自: 99.120.193.125 (08/21 21:02)
推 howhowlaugh :為什麼不能載BT?? 100M全速一天抓1T一年才寫365T 08/21 23:31
→ ta29 :重複讀寫 08/21 23:32
→ howhowlaugh :3000p/e可以讓你抓2年.. 應該不是顆粒壽命問題 08/21 23:33
推 abian :我也有加減拿來P2P.. 5年保，沒在怕 (〞︶〝*) 08/22 00:28
→ bluesapphire:BT一點都不會傷硬碟，不要再有怪怪傳統觀念了 08/22 00:57
更新一下進度
跟原廠聯絡之後 客服表示有可能是因為不正常的斷電 或是 Trim 的指令寫入時
斷電造成這種情況 (本人不是專家也當作聽一聽就算了)
以下是原廠提供的方法去解決 大約95%的問題都可以處理
Thank you for contacting Crucial.
In most cases, your SSD can be returned to normal operating condition by
completing a power cycle. The process will take approximately one hour.
We recommend you perform this procedure on a desktop computer because it
allows you to only connect the SATA power connection, which improves the odds
of the power cycle being successful. However, a USB enclosure with an
external power source will also work. Apple and Windows desktop users follow
the same steps.
1. Once you have the drive connected and sitting idle, simply power on
the computer and wait for 20 minutes. We recommend that you don't use the
computer during this process.
2. Power the computer down and disconnect the drive for 30 seconds.
3. Repeat steps 1 and 2 one more time.
4. Reconnect the drive normally, and boot the computer to your operating
system.
5. If the latest firmware has not been updated to your drive, do so. Go
to http://www.crucial.com/support/firmware.aspx for our firmware updates.
A laptop computer will also work, but you’ll have connect the drive and
navigate to the systems BIOS menu. (Please refer to your system manufacture’
s documentation on how to access the BIOS.) Allowing the drive to sit in the
BIOS will improve the odds that the power cycle will work. For laptops, we don
’t recommended using a USB enclosure powered via USB. In addition, Apple
laptop users must boot the system to the open firmware.
1. Laptop users will need to be in the BIOS menu, or open firmware as stated
above. The computer will need to stay powered for 20 minutes. We recommend
you don’t use the laptop during this process.
2. Power the computer down and disconnect the drive for 30 seconds.
3. Repeat steps 1 and 2 one more time.
4. Reconnect the drive normally, and boot the computer to your operating
system.
5. If the latest firmware is has not been updated to your drive, do so. Go
to http://www.crucial.com/support/firmware.aspx for our firmware updates.
換句話說就是接上 M4 通電20分鐘，關機退出 30秒，再通電20分鐘
讓 M4 有機會進入下一個循環
我的 M4 試過沒有用，當然跟原廠討 RMA
有二種方式：一個是原廠先寄出東西，但是拿你的信用卡當押金，當他們收到東西
就會退錢
另一種是先寄回去，當他們收到就會寄出可用的 M4
我很急著用電腦就選第一個
題外話
雖然M4 不可以開機，不過當作第二顆硬碟還可以存取"大部份"資料
只有少部份資料是無法讀取
同時也用 CrystalDiskInfo 看M4 的狀況
http://postimage.org/image/iugzvgqwh/
很神奇， 100% Health ，不過實際上有部份區域無法讀取
P2P 有沒有損壞磁區 就看大家的評斷
文章很長~~
※ 編輯: geff 來自: 99.120.193.125 (08/22 02:33)
→ louis925 :從你的CrystalDiskInfo看來，似乎已經壞軌了.. 08/22 10:48
→ geff :請問怎麼看的 08/22 10:53
推 chang0206 :呃，SSD要怎麼壞軌？ 08/22 10:54
→ louis925 :ㄜ，我是指有區塊壞掉了啦 08/22 11:01
推 louis925 :你的CrystalDiskInfo按功能>進階功能>Raw值 改成 10 08/22 11:06
→ louis925 :(我的是中文版的，你要把它翻成英文) 然後你就會看到 08/22 11:07
→ louis925 :你的BB C3 C4 項(跟損壞區塊有關的)之類的都不是零 08/22 11:09
※ 發信站: 批踢踢實業坊(ptt.cc)
※ 轉錄者: geff (99.120.193.125), 時間: 08/22/2012 12:01:53
→ yugif:BT對傳統碟碟傷不大，但SSD比較大（寫入次數和通道數） 08/23 18:20
→ yugif:我的是三年保，保內加減拿來抓 XD 08/23 18:21
推 showbbs:硬碟能堡內操壞不錯了 08/23 20:54