Re: [問題] E755入手兩天, ROM燒壞了...囧rz

[yuukikaze (jgoigjts;k;kA)]

今天買了材料自己做好了JTAG interface了
http://www.wretch.cc/album/show.php?i=yuukikaze&b=6&f=1128883363&p=41
比原作者的還要漂亮http://www.atomboost.com/toshiba_linux/e740_jtag.png
哈哈...

問題是...我不會用Linux啊  囧rz
有沒有人懂下面這堆東西啊....如果我現在裝Linux有沒有辦法快速入門啊...嗚嗚嗚


Once you have connected the lead, you need to run bsrflash to replace the
data you lost from your PDA. You can get a copy from handhelds.org CVS.

export CVSROOT=:pserver:[e-mail]:/cvs
cvs login
cvs co debrick




You probably only need to replace the bootloader, but even if you erased the
OS too, dont worry - once you have replaced the bootloader, you can use it to
replace the OS without using JTAG any more (May not be true for all PDAs).
Simply take the first 256KB of the ROM image, and flash this using bsrflash:
(This can take a very long time). You will need (on e7xx at least) to unlock
the flash first, which is shown in the instructions below.

dd if=rom_image.bin of=wince_bootloader_img.bin bs=262144 count=1
bsrflash u
bsrflash p wince_bootloader_img.bin




You should verify the image after flashing it:

bsrflash v wince_bootloader_img.bin




Once you have flashed the unit successfully, turn off the main power switch
(the small white one at the bottom) and then turn it back on. You should see
the bootloader pop up within 5 seconds or so. If not, and the flash verified
ok, you may have another problem.

--
※ 發信站: 批踢踢實業坊(ptt.cc) 
◆ From: 163.25.118.32
推 yen6991:真有心@@..要是我就直接去買新的了Q_Q
推 gpc:樓上的不是本科系的..
推 yuukikaze:我也不是本科系的....我只是很窮不可能買新的
推 TroyLee:要接Jtag還要拆開機器吧....
→ TroyLee:Linux的話去抓 ubuntu Live CD 或是 Knoppix 都行...
→ TroyLee:蠻方便的....除非要編譯東西我就不確定livecd可不可行
推 yuukikaze:機器拆了, 也把接點都接出來了, 弄了快拆頭
→ yuukikaze:插上去硬體部份就完成, 只差Linux的臨門一腳了  囧rz
推 TroyLee:那就去抓 LiveCD ...不用安裝光碟放進去重新開機就可以了
推 philipwen:請問Troy凶是我認識的那位嗎?
推 TroyLee:恩恩....就是我....XD