[問題] spectre 模擬電容時出現error

[Suckmycock (西基基)]

最近有自己的工作站後

OS是使用centos 5.5

把原本的資料夾全部轉移到自己的工作站上

結果模擬時一直出錯

錯誤訊息如下


ERROR (VACOMP-1008): Cannot compile ahdlcmi module library. Check the log
file input.ahdlSimDB/bsource_1.input.ahdlcmi/Linux2.6.18-194.el5+gcc/../ahdlcmi.out
for details. If the compiler ran out of memory, use 'setenv CDS_CMI_COMPLEVEL
0', and try again. If the reason for the failure was a syntax error, contact
your Cadence Customer Support representative with the netlist, log files,
behavioral model files, and any other information that can help identify the
problem.
Warning from spectre in `mimcap':`C0', during hierarchy flattening.
    WARNING (SFE-30):
"/home/7100064418/T018MMSP002K1/tsmc18rf/../skill/../models/spectre/rf018.scs"
19563: C0.cmim: `temp' is not a valid parameter for an instance of
`bsource_1'.  Ignored.
    WARNING (SFE-30):
"/home/7100064418/T018MMSP002K1/tsmc18rf/../skill/../models/spectre/rf018.scs"
19563: C0.cmim: `tnom' is not a valid parameter for an instance of
`bsource_1'.  Ignored.
    WARNING (SFE-30):
"/home/7100064418/T018MMSP002K1/tsmc18rf/../skill/../models/spectre/rf018.scs"
19563: C0.cmim: `bs_par_0' is not a valid parameter for an instance of
`bsource_1'.  Ignored.
    WARNING (SFE-30):
"/home/7100064418/T018MMSP002K1/tsmc18rf/../skill/../models/spectre/rf018.scs"
19563: C0.cmim: `bs_par_1' is not a valid parameter for an instance of
`bsource_1'.  Ignored.
    WARNING (SFE-30):
"/home/7100064418/T018MMSP002K1/tsmc18rf/../skill/../models/spectre/rf018.scs"
19563: C0.cmim: `bs_par_2' is not a valid parameter for an instance of
`bsource_1'.  Ignored.
        Further occurrences of this warning will be suppressed.

拜託有經驗的高手幫忙一下 感激不盡

--
→ redmoonlaw:差不多阿～＿～
→ abian:5菜*10 炸肉 15 白飯10元
→ abian:               白
推 K8K357:abian以為他打錯字......
--
※ 發信站: 批踢踢實業坊(ptt.cc) 
◆ From: 140.120.108.159
推 hihiwill:請試兩個方法：1. yum install gcc 2.-64
→ Suckmycock:第一個方法我試過了 也是不行
→ Suckmycock:第二個我不懂是什麼意思
推 coldman2001:Model檔正確嗎?
推 hihiwill:ADE: setup->Environment->
→ hihiwill:在usrCmdLineOption裡填入-64