Print out the gate list by the command“report design netlist” from the
“Circuit::_dfsGateList”. The output should be in the original circuit
description file format (for the sake of convenience, we repeat it here).
不太清楚要如何從 _dfsGateList 還原出 original circuit description file format
是說 _dfsGateList 裡面儲存的東西就是照著 level 最下面到最上面的順序排好了嗎
可是好像也不對 post order 的 DFS 跑出來的是按照個別分支的 level , 而且要印出
netlist 直接叫出 gateMap 把 gate 印一印就好了 , 不太清楚做 DFS 的目的 ?
--
※ 發信站: 批踢踢實業坊(ptt.cc)
◆ From: 140.112.4.242