胡惠文 Huiwen Hu

教授 Professor

TEL：[phone]轉ext.7452

Office :        CE323

Lab.：CE224  複合材料與輕結構實驗室
             Composite Materials and Lightweight Structures Laboratory

E-mail：[e-mail]

Education：美國普度大學航太工程博士


專長領域Research Interests：

彈塑性力學 Elasticity & Plasticity
複合材料力學 Mechanics of Composite Materials
結構動力學 Structural Dynamics
載具結構設計 Vehicle Structural Design


教學課程Teaching Courses：

底盤系統檢測實習 Chassis Inspection and Diagnosis
引擎系統檢測實習 Engine Inspection and Diagnosis
材料力學 Mechanics of Materials
車輛振動與噪音 Introduction to Vehicle Vibration and Noise
機構學 Kinematics and Dynamics of Mechanism
車輛與機械工程設計 Kinematics and Dynamics of Mechanism
彈性力學 Elasticity
複合材料力學 Mechanics of Composite Materials
金屬工業研究與發展中心底盤關鍵技術發展計畫顧問95年10月迄今
研究著作Research Projects：

近五年內執行之研究計畫

經濟部在地型學界科專三年計畫:輕結構大客車車體之研究與開發(計畫主持人)

98年度教育部產學合作計畫(光陽工業股份股份公司)：機車車架之製造殘留應變與強度分
析98E-06-084 (計畫主持人)

98年度金屬工業研究發展中心委託合作研究計畫：輕量化轉向機柱結構及作動機構分析(
計畫主持人)

98年度金屬工業研究發展中心委託合作研究計畫：以空間結構(Space Frame)概念整合車
輛底盤與車身結構之設計分析研究(計畫主持人)

97年度國科會計劃:大客車車體結構材料之碰撞測試與結構動態變形模型之探討
 NSC-97-2221-E-020-015 (計畫主持人)

97年度國家太空中心：小型發射載具－整合驗證與確認服務計劃97-NSPO(B)-SE-FA04-01
(共同主持人)

97年度國家太空中心：探空十一號火箭先期研究計劃97-NSPO(B)-SE-FA04-02 (共同主持
人)

97年度經濟部南部傳統產業科技關懷計畫學界認養97-01-02-0007：超輕飛機結構安全設
計分析 (計畫主持人)

金屬中心超輕型航空載具製造廠檢驗即時技術輔導-超輕飛機結構測試與分析 (計畫主持
人)

97年度經濟部主導性新產品開發輔導計畫(光陽工業股份股份公司)：四輪車整車碰撞模擬
與結構強度分析 (計畫主持人)

97年度教育部產學合作計畫(光陽工業股份股份公司)：機車車架結構剛性設計、分析與測
試97E-06-052 (計畫主持人)

97年度金屬工業研究發展中心委託合作研究計畫：車輛底盤次系統關鍵技術開發三年計畫
－整車結構輕量化設計之方法研究97-EC-17-A-16-R7-0792 (計畫主持人)

96年度金屬工業研究發展中心委託合作研究計畫：車輛底盤次系統關鍵技術開發三年計畫
－底盤系統輕量化之結構剛性與碰撞強度分析 96-EC-17-A-16-R7-0792 (計畫主持人)

96年度教育部產學合作計畫(成運汽車製造有限股份公司)：大客車整車翻覆碰撞分析
 96E-06-307 (計畫主持人)

96年度國家太空中心：入軌火箭關鍵技術整合確認及驗證計劃 96-NSPO (B)-SE-FA04-01
(共同主持人)

95年度教育部產學合作計畫(成運汽車製造有限股份公司)：大客車車體結構剛性與強度設
計、分析與測試 公-05-工-032 (計畫主持人)榮獲教育部頒發產學合作成果績優獎(400多
件產學計畫中評選9件績優獎)
巴士車廂內噪音之檢測評估 (成運汽車製造有限股份公司) (共同主持人)

94年度教育部台俄學術交流計劃：無人飛行載具之設計實作教學 (共同主持人)
近五年內研究論文

(A)     學術期刊論文

1.         Hu, Huiwen, Kao, HuaiEn, (August 2009) “Model Validation of an
Ultralight Aircraft Using Experimental Modal Analysis,” Submitted to Journal
of Aeronautics, Astronautics and Aviation, Series A (Accepted for
publication) (EI).

2.          Hu, Huiwen, Wang, Jeiming, (May 2009) “Damage Detection in Woven
Fabric Composite Laminates Using Modal Strain Energy Method,” Engineering
Structures, Vol. 31, pp.1042-1055. (SCI, Impact factor 1.29).

3.          Hu, Huiwen, Wu, Chengbo, (Feb 2009) “Development of Scanning
Damage Index for the Damage Detection of Plate Structures using Modal Strain
Energy Method,” Mechanical System and Signal Processing, Vol 23, pp.274-287.
(SCI, Impact factor 1.63)

4.          Hu, Huiwen, Wang, Yao-cheng, Lu, Wei-Jun, (Jun 2009) “Structural
Dynamic Analysis of a Sounding Rocket during the Liftoff,” Journal of
Aeronautics, Astronautics and Aviation, Series A, Vol. 41, No. 2, pp.
111-120. (EI)

5.          Hu, Huiwen, Wang, Jieming, Lu, Wei-Jun, (Dec 2008) “Simulation
and Analysis of Fairing Jettison from Sounding Rocket,” Journal of
Aeronautics, Astronautics and Aviation, Series A, Vol. 40, No. 4, pp.
237-244. (EI)

6.          Hu, Huiwen, Wang, Jieming, (May 2008) “Nondestructive Detection
of Damage in Woven Fabric Composite Laminate Using Energy Index Method,”
 Journal of Japanese Society of Experimental Mechanics, Vol. 8, special
issue, pp. 120-126.

7.          Hu, Huiwen, Wu, Chengbo, (Dec 2008) “Nondestructive damage
detection of two dimensional plate structures using modal strain energy
method,” Journal of Mechanics, Vol.24, No.4, pp.319-332. (SCI, Impact factor
0.722)

8.          Hu, Huiwen, (2007) “Physical Aging in Long Term Creep of
Polymeric Composite Laminates,” Journal of Mechanics, Vol.23, No.3,
pp.245-252. (SCI, Impact factor 0.722) (NSC-93-2212-E-020-010)

9.          胡惠文,高懷恩,呂鎮源,何琦偉, (2007) “超輕飛機 KINGBIRD 之結構設計
分析” 中華民國航空太空學會會刊,系列B, 第37卷,第2期, pp. 68-84.(EI)

10.     Hu, Huiwen, Wang, Bor-Tsuen, Lee, Cheng-hsin, (2006) “Damage
Detection of Surface Crack in Composite Quasi-isotropic Laminate Using Modal
Analysis and Strain Energy Method” Key Engineering Materials Journal, Vol.
306-308, pp. 757-762. (SCI, Impact factor 0.235)

11.     Hu, Huiwen, Wang, Bor-Tsuen, Lee, Cheng-Hsin, Su, Jing-Shiang (2006)
“Damage Detection of Surface Crack in Composite Laminates Using Modal
Analysis and Strain Energy Method,” Composite Structures, Vol. 74(4), pp.
379-405 (SCI, Impact factor 1.45).

12.     Hu, Huiwen, (2006) “Master Curve of Creep in Polymeric Off-axis
Composite Laminates,” Journal of Mechanics, Vol.22, No.3, pp.229-234 (SCI,
Impact factor 0.72). (NSC-91-2218-E-020-006)

13.     胡惠文, (2005) “纖維強化塑膠之物理老化 (I)：時間效應,” 塑膠資訊, 七
月份, No. 104, pp. 15-36. (NSC-91-2218-E-020-006)

14.     胡惠文, (2005) “纖維強化塑膠之物理老化 (II)：溫溼度效應,” 塑膠資訊,
七月份, No. 104, pp. 36-52. (NSC-90-2218-E-020-006)

(B)    審查中論文

1.          Hu, Huiwen, Lee, Cheng-hsin, Wu, Chengbo, “Damage Detection of
Matrix Crack in Composite Laminates Using Modal Strain Energy Method,”
 Submitted to Mechanics of Composite Mechanics (Revised) (SCI).

2.          Hu, Huiwen, Lu, Zhen-Yuan, Wang, Sheng-Yuan, Lu, Wei-Jun “Finite
Element Model Validation and Crashworthiness Analysis of An Off-road Utility
Vehicle,” Submitted to Finite Element in Analysis and Design (SCI).

3.          Hu, Huiwen, Wu, Chengbo, Lu, Wei-Jun, “Damage Detection of
Circular Hollow Cylinder Using Modal Strain Energy and Scanning Damage Index
Methods,” Submitted to Experimental Techniques. (SCI)

(C)    研究專書

1.          Hu, Huiwen, “Modelling physical ageing in polymer composites,”
 Chapter 7 of the book title: Aging of Composites, Woodhead Publishing
Limited, Abington Hall, Abington, Cambridge, CB21 6AH, England, 2008.

(D)    國際研討會論文

1.          Hu, Huiwen, Wu, Chengbo, (December, 2008) “Development of
Scanning Index for Nondestructive Damage Detection of Cylindrical Structures,
” The 3rd International Symposium on Advanced Fluid/Solid Science and
Technology in Experimental Mechanics, Tainan, Taiwan.

2.          Hu, Huiwen, Wang, Jieming, Lu, Wei-Jun, (October, 2007) “
Simulation of Ejecting Fairing and Payload from a Rocket Vehicle,” The 4th
Japan-Taiwan Workshop on Mechanical and Aerospace Engineering, Hakone, Japan,
pp.320-328.

3.          Hu, Huiwen, Wang, Jieming, (September, 2007) “Nondestructive
Detection of Damage in Woven Fabric Composite Laminates Using Energy Index
Method,” The 2nd International Symposium on Advanced Fluid/Solid Science and
Technology in Experimental Mechanics, Osaka, Japan.

4.          Wang, Bor-Tsuen, Hu, Huiwen, Liu, Jian-Feng, (October, 2006) ”
 Prediction of Unknown Harmonic Force Acting on Beam by PVDF Sensors,”
 Proceedings of ICAST2006: The 17th International Conference on Adaptive
Structures and Technologies, Taipei, Taiwan.

5.          Hu, Huiwen, Wang, Jieming, Jwo, Shyi-Liang, (September, 2006) “A
Damage Index to Detect Surface Cracks in Woven Fabric Composite Laminates
Using Experimental Modal Analysis,” The 21st Annual Technical Conference of
the American Society for Composites, Michigan, USA, Paper No 161.

6.          Hu, Huiwen, Wang, Bor-Tsuen, Lee, Cheng-hsin, (July, 2005) “
Damage Detection of Matrix Cracking in Composite Laminate” Society for
Experimental Mechanics (SEM) annual conference and exposition, Portland, USA,
pp.59-69.

7.          Hu, Huiwen, Wang, Bor-Tsuen, Lee, Cheng-hsin, (April, 2005) “
Damage Detection of Surface Crack in Composite Quasi-isotropic Laminate Using
Modal Analysis and Strain Energy Method” The 6th International Conference on
Fracture and Strength of Solids, Bali, Indonesia, pp. 759-764.

(E)     國內研討會論文

1.          Hu, Huiwen, Kao, Chong-Hua, Chen, Li-Chi, (6 Jun 2009)  “
Experimental Modal Analysis and Finite Element Model Validation for A
Motorbike Frame,” 17th Chinese Society of Sound and Vibration, Taipei,
Taiwan.

2.          Hu, Huiwen, Lu, Wei-Jun, Wang, Jin-Fu, Hsieh, Pao-hsien, (6 Jun
2009)  “Experimental Modal Analysis and Finite Element Model Validation for
An Aluminum Wheel,” 17th Chinese Society of Sound and Vibration, Taipei,
Taiwan.

3.          Hu, Huiwen, Kao, Huai-En, (December 2008) “Modal Experiment and
Model Validation for an Ultralight Aircraft Structure,” The 50th AASRC/CCAS
Joint Conference, Taipei, Taiwan, Paper No 05-03.

4.          Hu, Huiwen, Wang, Yaocheng, Lu, Wei-Jun, Wang, Jieming, (December
2008) “Shock and Vibration Analysis of Sounding Rocket Structures,” The
50th AASRC/CCAS Joint Conference, Taipei, Taiwan, Paper No 05-04.

5.          Hu, Huiwen, Chang, Shuyuan, Chen, Kunyi, Tung, Peichun, Hsieh,
Pao-hsien, (November 2008)  “Weight Reduction Design and Structure Analysis
for a SUV Kunckle,” The 25th  National Conference on Mechanical Engineering,
The Chinese Society of Mechanical Engineers, CSME, Changhua, Taiwan, Paper No
CSME 25-915.

6.          Hu, Huiwen, Chen, Kunyi, Tung, Peichun, Chang, Shuyuan, (November
2008) “Dynamic Tests for SUV Chassis Structures,” The 25th  National
Conference on Mechanical Engineering, The Chinese Society of Mechanical
Engineers, CSME, Changhua, Taiwan, Paper No CSME 25-438.

7.          Hu, Huiwen, Chu, Hsun-Chih, Lu, Wei-Jun, (November 2008) “
Rollover Impact Analysis of Full-scale Large Passenger Vehicle,” The 32nd
National Conference on Theoretical and Applied Mechanics, Jiayi, Taiwan,
Paper No K009.

8.          Hu, Huiwen, Yan, Yi-hong, Chen, Li-chi, (November 2008) “
Experimental Modal Analyses of the Motorcycle Frames,” The 32nd National
Conference on Theoretical and Applied Mechanics, Jiayi, Taiwan, Paper No K010.

9.          Hu Huiwen, Yang, Chonglin, Lu, Wei-Jun, (October 2008) “
Stiffness and Strength Analysis for a Large Passenger Vehicle Structure,”
 The 13th National Conference on Vehicle Engineering, Taipei, Taiwan Paper No
A_011.

10.     Hu, Huiwen, Tung Peichun, Chen, Kunyi, Chang, Shuyuan, (October 2008)
“Weight Reduction Design and Analysis for the Front Control Arm of a Sport
Utility Vehicle,” The 13th National Conference on Vehicle Engineering,
Taipei, Taiwan Paper No F_005.

11.     Hu, Huiwen, Wu, Chengbo, Wang, Jeiming, (May 2008) “Development of
Scanning Damage Index Method for Nondestructive Damage Detection of Plate
Structures (I) – Isotropic Plate,” 16th Chinese Society of Sound and
Vibration, Taipei, Taiwan.

12.     Hu, Huiwen, Wang, Jeiming, Wu, Chengbo (May 2008) “Development of
Scanning Damage Index Method for Nondestructive Damage Detection of Plate
Structures (II) – Anisotropic Plate,” 16th Chinese Society of Sound and
Vibration, Taipei, Taiwan.

13.     Hu, Huiwen, Chang, Shuyuan, Chen, Kung-Yi, Hsieh, Pao-Hsien,
(December 2007) “Strength Analysis of the Front Knuckle of SAVRIN,” The
31th National Conference on Theoretical and Applied Mechanics, Kaohsiung,
Taiwan, paper no. K-11.

14.     Hu, Huiwen, Chen, Kung-Yi, Chang, Shuyuan, Wang, Yaocheng, Liu,
Chin-chan, (December 2007) “Dynamic Simulation and Analysis of SAVRIN Front
Suspension System,” The 31th National Conference on Theoretical and Applied
Mechanics, Kaohsiung, Taiwan, paper no. K-10.

15.     Hu, Huiwen, Wang, Bor-Tsuen, Yang, Chong-Lin, (November 2007) “
Experimental Modal Analysis for a Large Passenger Vehicle BX212MAT-S45,” The
12th National Conference on Vehicle Engineering, Pingtung, Taiwan.

16.     Hu, Huiwen, Chu, Hsun-Chih, Yang, Chong-Lin, (November 2007) “
Rollover Simulation and Impact Analysis of a Large Passenger Vehicle
BX212MAT-S45,” The 12th National Conference on Vehicle Engineering,
Pingtung, Taiwan.

17.     Hu, Huiwen, Kao, Huai-En, Chu, Hsun-Chih, Wu, Chengbo, (November
2007) “Impact Simulation and Strength Analysis for KINGBIRD Ultralight
Aircraft,” 49th AASRC/CCAS Joint Conference, Pingtung, Taiwan.

18.     Hu, Huiwen, Lu, Wei-Jun, Wang, Jeiming, (November 2007) “Ejection
Simulation of Nose Fairing and Payload from a Sounding Rocket,” 49th
AASRC/CCAS Joint Conference, Pingtung, Taiwan.

19.     Hu, Huiwen, Wu, Chengbo, Chu, Hsun-Chih, Chen, Kung-Yi, (November
2007) “Rollover Impact Simulation and Structural Strength Analysis for the
Large Passenger Vehicle of BH117K,” 24th  National Conference on Mechanical
Engineering, The Chinese Society of Mechanical Engineers, CSME, Taoyuan,,
Taiwan, Paper No C01-0022.

20.     Hu, Huiwen, Lu, Zhenyuan, Kao, Huaien, Yang, Chonglin, (November
2007) “Experimental Modal Analysis for a Large Passenger Vehicle BH117K,”
 24th  National Conference on Mechanical Engineering, The Chinese Society of
Mechanical Engineers, CSME, Taoyuan,, Taiwan, Paper No C01-0023.

21.     Hu, Huiwen, Wang, Bor-Tsuen, Wang, Jeiming, Kao, Huai-En, Chen,
Kung-Yi, Lu, Zhen-Yuan, (Jun 2007) “Vibration Analysis and Experiment of
Body Structures for Large Passenger Vehicle,” 15th Chinese Society of Sound
and Vibration, Taipei, Taiwan.

22.     Hu, Huiwen, Wang, Bor-Tsuen, Yang, Chong-Lin, Wu, Chengbo, Chang,
Shuyuan, (Jun 2007) “Vibration Analysis and Experiment of Chassis Structures
for Large Passenger Vehicle,” 15th Chinese Society of Sound and Vibration,
Taipei, Taiwan.

23.     Hu, Huiwen, Chen, Young-Chang, Wang, Bor-Tsuen, Yang, Chong-Lin,
(December 2006) “Structural Welding Simulation and Analysis for Large
Passenger Vehicle－(I) Structural Stiffness Analysis,” The 30th National
Conference on Theoretical and Applied Mechanics, Changhua, Taiwan.

24.     Hu, Huiwen, Chen, Young-Chang, Chu, Hsun-Chih, Yang, Chong-Lin,
(December 2006) “Structural Welding Simulation and Analysis for Large
Passenger Vehicle－(II) Rollover Analysis,” The 30th National Conference on
Theoretical and Applied Mechanics, Changhua, Taiwan.

25.     Hu, Huiwen, Chang, Shuyuan, (December 2006) “Stress Analysis of
Blade Hub for Ultralight Aircraft Propeller,” 48th AASRC/CCAS Joint
Conference, Taoyuan, Taiwan.

26.     Hu, Huiwen, Kao, Huai-En, Lu, Zhen-Yuan, Ho, Chy-Wei, Chu, Hsun-Chih,
(December 2006) “Analysis of Structural Stiffness and Stresses for KIGNBIRD
Ultralight Aircraft,” 48th AASRC/CCAS Joint Conference, Taoyuan, Taiwan.

27.     Hu, Huiwen, Wang, Jeiming, Jwo, Shyi-Liang, (November 2006) “
Equivalent Laminate Model for Woven Fabrics Composite in Free Vibration
Analysis”, 23th  National Conference on Mechanical Engineering, The Chinese
Society of Mechanical Engineers, CSME, Tainan, Taiwan, Paper No C3-038.

28.     Hu, Huiwen, Wang, Bor-Tsuen, Wu, Chengbo, (November 2006) “
Application of Modal Strain Energy Index to the Damage Detection of
Cantilever Beams”, 23th  National Conference on Mechanical Engineering, The
Chinese Society of Mechanical Engineers, CSME, Tainan, Taiwan, Paper No
C3-008.

29.     Hu, Huiwen, Wang, Bor-Tsuen, Yang, Chong-Lin, (November 2006) “
Analysis of Structural Stiffness and Strength for Large Passenger Vehicle,”
 The 11th National Conference on Vehicle Engineering, Changhua, Taiwan.

30.     Hu, Huiwen, Chu, Hsun-Chih, Yang, Chong-Lin, (November 2006) “
Rollover and Impact Analysis of Large Passenger Vehicle,” The 11th National
Conference on Vehicle Engineering, Changhua, Taiwan.

31.     Hu, Huiwen, Wang, Bor-Tsuen, Wu, Chengbo, (April 2006) “Detection of
Surface Crack in Aluminum Alloy 6061 Thin Plate Using Experimental Modal
Analysis” The 13th Annual Technical conference of the Nondestructive
Detection Technique, Taoyuan, Taiwan.

32.     Hu, Huiwen, Wang, Bor-Tsuen, Lee, Cheng-Hsin, Wu, Chengbo, (December
2005) “Application of Modal Analysis to Detect Matrix Cracks in Composite
Laminates,” The 29th National Conference on Theoretical and Applied
Mechanics, Hsinchu, Taiwan.

33.     Hu, Huiwen, Wang, Bor-Tsuen, Lee, Cheng-Hsin, Wang, Jeiming,
(December 2005) “Model Verification of Finite Element Analysis for Free
Vibration of Composite Laminates,” The 29th National Conference on
Theoretical and Applied Mechanics, Hsinchu, Taiwan.

34.     Tsai, Chien-Hsiung, Hu, Huiwen, Lu, Zhen-Yuan, (December 2005) “An
Investigation of Ultralight Aircraft Propeller Design – (I) Aerodynamic
Analysis” 47th AASRC/CCAS Joint Conference, Kaohsiung, Taiwan.

35.     Hu, Huiwen, Tsai, Chien-Hsiung, Kuo, Huai-En, Wang, Jeiming,
(December 2005) “An Investigation of Ultralight Aircraft Propeller Design –
 (II) Structural Analysis” 47th AASRC/CCAS Joint Conference, Kaohsiung,
Taiwan.

(F)     專利

1.          Tseng, Chyuan-Yow, Hu, Huiwen, Tsai, Chien-Hsiung, Lin,
Yuan-Ting, (2009) “A Wind-Actuated Apparatus for Electric Power Generating,”
 ROC patent (invention), Public No. 200827545, Certificated No. I313728.

(G)   技術報告

1.胡惠文、吳承柏 “BH117K-S28車身結構強度計算書” 交通部案號：A96VCAQJ，2007。

2.胡惠文、褚訓志 “BH120MAT-S46車身結構強度計算書”交通部案號：A96VCA7W，2007。

3.胡惠文、褚訓志 “BH212MAT-S45車身結構強度計算書”交通部案號：A96VCB4M，2007。