課程名稱︰熱力學
課程性質︰必修
課程教師︰黃美嬌
開課學院：工學院
開課系所︰機械系
考試日期（年月日）︰2011/01/13
考試時限（分鐘）：180 mins
是否需發放獎勵金：是
（如未明確表示，則不予發放）
試題 :
Q1.(21%)
Answer the following questions clearly but briefly.Note you get no point if no
or wrong answer is given to the why-question.
(i)
A system undergoes a process between two fixed states first in a reversible
manner and then in an irreversible manner. For which case is the amount of
the integral ∫(δQ/T) greater? Why?
(ii)
A system undergoes a process involving a same amount of ∫(δQ/T) first in
a reversible manner and then in an irreversible manner.For which case is
the entropy change of the system greater? Why?
(iii)
A system undergoes a process between two fixed states in a reversible
manner and then in an irreversible manner.For which case is the entropy
change of the system greater? Why?
(iv)
Somebody claims to have developed a new heat-engine cycle that is operating
between the temperature limits of 300K ans 800K and has a theoretical
efficiency of 0.65. How do you evaluate this claim?
(v)
Does the area enclosed by the cycle on T-s diagram represent the net work
input for the ideal vapor-compression refrigeration cycle? If yes,why so?
If not,why not?
(vi)
What is the criterion that equates the amount of the integral ∫Pdv to the
work done by a closed system during a process?
(vii)
What are the limitation on the thermodynamic properties of a refrigerant
for given operating temperatures(ambient temperature T∞ and the
refrigerated-space temperature Tc)?
Q2.(25%)
A dual cucle with air as the working fluid has a compression ratio of 14
and a cutoff ratio of 1.4. At the beginning of the compression process,the
working fluid is at 100kPa and 27℃. A total of 600kJ/kg of heat is
transferred to air during the whole heat-addition process.Utilizing the
cold-air-standard assumption, determine
(a)the temperature and pressure of air at the end of each process
(b)the work output during the process 3-4-5 and
(c)the thermal efficiency.
(state 1~5 從dual cycle的P-v圖最右下角開始,順時鐘依序標上)
Q3.(30%)
Air enters a gas turbine with a regenerator at 100kPa and 27℃.The pressure
ratio is 12; 600 kJ/kg of heat are added to the air in the combustion
chamber;and the adiabatic regenrator increases the temperature of the cold
air by 31℃. Assume an isentropic efficiency of 0.92 for the compressor and
0.89 for the turbine.Use the air-standard assumption and answer the
following questions.
(a)Sketch the T-s diagram of the cycle. Identify the states 1~6.
(b)Find the effectiveness εof the regenerator.
(c)Determine the overall thermal efficiency.
Q4.(30%)
Consider a two-stage-cascade multi-purpose refrigeration system using
R-134a as the working fluid in both cycles.The refrigerant leaves the
condenser at 1MPa and is throttled to 0.4M before it enters into the heat
exchanger. The refrigerant enters the refrigerator at -6℃ and the freezer
at -20℃.The mass flow rate of the refrigerant in the condenser is 0.1kg/s.
The required cooling power in the freezer is 10kW. Assume all components
and process are ideal except that the heat exchanger has a heat loss 1.5k.
Also assume state 4 (高溫cycle進入高壓compresor前的狀態) and state 10(低溫
cycle進入低壓compressor前的狀態)are both saturated vapor and state 2(高溫
cycle 通過condenser後的狀態) and state 6(低溫cycle通過regenerator後的狀態)
are saturated liquid.
(a)Sketch the T-s diagram of the cycle.Identify the states 1~10.
(b)Find the mass flow rate of the refrigerant in the freezer.
(c)Find the overall coefficient of performance,COP.
--
※ 發信站: 批踢踢實業坊(ptt.cc)
◆ From: 61.64.172.216
※ 編輯: peter123456 來自: 61.64.172.216 (02/14 23:45)
※ 編輯: peter123456 來自: 61.64.172.216 (02/14 23:55)