推 encorev37383:第一次... 01/16 00:44
→ oliver1089 :把剩的解決掉= = 01/16 01:19
課程名稱︰材料力學
課程性質︰必帶
課程教師︰朱錦洲
開課學院：工學院
開課系所︰化工系
考試日期（年月日）︰2011/11/01
考試時限（分鐘）：110
是否需發放獎勵金：是
（如未明確表示，則不予發放）
試題 :
1.explanation
(a)Mechanics of materials
(b)Free-body diagram
(c)Plane stress and plane strain
(d)Shear stress and shearing strain
(e)Statically determinate and statically indeterminate
(f)Strain rosettes
2.A bar rack is sketched as shown in Fig.2. If each bar has a mass 10Kg.
Determine
(a)the reaction at the supports A and B,
(b)the internal force at section a-a
3.At a point in a structural member subjected to normal and shear stresses
on horizontal and vertical planes as shown in Fig.3.
(a)Determine and show on a sketch,(i) the principal stresses,(ii) the maximum
shearing stress and (iii) the maximum in-plane shearing stress at the point.
(b)Determine and show on a sketch, the normal and shear stresses at the point
on the inclined plane a-b at the point.
(c)Use Mohr's circle to verify your answers in (a) and (b).
4.A point in a body subjected to plane strain, if εx=+500μ, εy=-300μ and
εp1=+1000μ(one principal strain) are given, please determine
(a)the shearing strain γxy
(b)the other two principal strains, εp2 and εp3
(c)γmax (max. shearing strain)
(d)the in-plane principal directions, θp
(e)Prepare a sketch showing the principal strain deformations and the maximum
shearing strain distortions.
(f)Use Mohr's circle to verify your answers.
5.Member AD of the timber truss shown in Fig.5 is framed into the 100x150-mm
bottom chord ABC as shown in the insert. Determine the dimension a that must
be used if the average shearing stress parallel to the grain at the ends of
chord ABC is not to exceed 3.0 MPa.
Figure: http://ppt.cc/YfRY
--
※ 發信站: 批踢踢實業坊(ptt.cc)
◆ From: 59.115.54.199