※ 引述《evilmask (奕之華)》之銘言:
: 這看來似乎很嚴重呀,我把心中的想法說給你參考,試試吧:
: 請一步一步試試看,要交叉試。
: 一、bios用預設值,不要用最佳化,以最低的標準試。
: 若還是有問題的話,
: 二、之前安裝的顯卡驅動先移除掉。
: 若還是有問題的話,
: 三、那麻煩請先回復到原本是好的狀態試試,只裝一樣的產品試試。
小弟有測試過了,第二個方法行不通,第三個方法測試以後發現,得到以下結果:
1.我看我的說明書原來我的版子只有支援到333,那天賣方沒跟我說清楚我今天要
拿ㄑ去(剛好第七天)
2.顯示卡還是有問題,不管我是否有安裝或移除新的和舊的驅動程式,
以下情形持續發生,我也要拿去換。
倘若要換的話是不是顯示卡用技嘉的比較不會衝啊,因為我的版子也是技嘉的。
還有現在還有人在賣DDR333的記憶體嗎?謝謝大大的解答喔!
: ※ 引述《LunaKarasu (月鴉)》之銘言:
: : 小弟的電腦是一年半前買的,是捷元的套裝電腦,最近想玩天二,
: : 買了顯示卡跟一條512 的記憶體,結果要重灌的時候發現了以下的訊息:
: : A problem has detacted and windows has been shut down to prevent
: : damage to your computer
: : SESSUON3_INITIALIZATION_FAILED
: : If this is the first time you've seen this stop error screen,
: : restart tour computer. If this screen appears again, follow these step:
: : Check to make sure any new hardware or software is properly installed.
: : If this is a new installation , ask your hardware or software
: : manufacturer for any windows updates you might need.
: : If problem continue , disable or remove any newly installed hardware or
: : software. Disable BIOS memory options such as caching or shadowing . If
: : you need to use safe mode to remove or disable components, restart your
: : computer , press F8 to select Advenced Startup Options, and then select
: : safe mode.
: : 亂碼.....:
: : ***STOP:0x0000006F(0xC0000020,0x00000000,0x00000000,0x00000000)
: : 我新買的配備:
: : 恩雅魔鎧者256DDR RAM FX5700LE
: : CEON DDR 400 512MB RAM
: : 原配備:
: : 主機板:技嘉GA-8SG800
: : 記憶體是DDR333 256MB
: :
--
※ 發信站: 批踢踢實業坊(ptt.cc)
◆ From: 61.229.184.188