→ james1201: 是只能軟解(CPU) 不能硬解(GPU) 所以取決於你的CPU 08/23 20:43
→ james1201: 運算能力 所以都會LAG 我猜是你CPU不夠力所導致? 08/23 20:44
→ a0683g10: 把影片資訊丟上來看吧,應該是碼率太高CPU解不動 08/23 20:56
Format : Matroska
Format version : Version 2
File size : 901 MiB
Duration : 22mn 41s
Overall bit rate mode : Variable
Overall bit rate : 5 554 Kbps
Encoded date : UTC 2012-12-28 21:27:41
Writing application : mkvmerge v5.8.0 ('No Sleep / Pillow')
built on Sep 2 2012 15:37:04
Writing library : libebml v1.2.3 +
libmatroska v1.3.0
Video #1
ID : 1
Format : AVC
Format/Info : Advanced Video Codec
Format profile : High [email protected]
Format settings, CABAC : Yes
Format settings, ReFrames : 14 frames
Codec ID : V_MPEG4/ISO/AVC
Duration : 22mn 41s
Width : 1 920 pixels
Height : 1 080 pixels
Display aspect ratio : 16:9
Frame rate mode : Constant
Frame rate : 23.976 fps
Color space : YUV
Chroma subsampling : 4:2:0
Bit depth : 10 bits
Scan type : Progressive
Writing library : x264 core 129 r2230+696+35 805d074
tMod [10-bit@4:2:0 X86_64]
Encoding settings : cabac=1 / ref=14 / deblock=1:-1:-1 /
analyse=0x3:0x133 / me=umh / subme=10 /
psy=1 / fade_compensate=0.00 /
psy_rd=0.60:0.15 / mixed_ref=1 /
me_range=48 / chroma_me=1 /
trellis=2 / 8x8dct=1 / cqm=0 /
deadzone=21,11 / fast_pskip=0 /
chroma_qp_offset=-3 / threads=16 /
lookahead_threads=2 / sliced_threads=0 /
nr=0 / decimate=1 / interlaced=0 /
bluray_compat=0 / constrained_intra=0 /
fgo=0 / bframes=12 / b_pyramid=2 /
b_adapt=2 / b_bias=0 / direct=1 /
weightb=1 / open_gop=0 / weightp=2 /
keyint=480 / keyint_min=1 / scenecut=40 /
intra_refresh=0 / rc_lookahead=60 /
rc=crf / mbtree=1 / crf=16.0000 /
qcomp=0.75 / qpmin=0 / qpmax=81 /
qpstep=5 / ip_ratio=1.40 /
aq=3:1.00
Default : Yes
Forced : No
Audio #2
ID : 2
Format : FLAC
Format/Info : Free Lossless Audio Codec
Codec ID : A_FLAC
Duration : 22mn 41s
Bit rate mode : Variable
Channel count : 2 channels
Sampling rate : 48.0 KHz
Bit depth : 24 bits
Writing library : libFLAC 1.2.1 (UTC 2007-09-17)
Language : Japanese
Default : Yes
Forced : No
※ 編輯: john96354 (114.188.32.132), 08/23/2014 22:22:50
→ james1201: 那影片碼率不算高 你在播放時CPU使用率有滿載嘛 08/23 22:27
我也覺得碼率其實不高,播放5分鐘左右,就會開始影像和聲音對不上
CPU從開始撥放時的60~70%慢慢上升變成100%,就lag了
※ 編輯: john96354 (114.188.32.132), 08/23/2014 22:36:57
※ 編輯: john96354 (114.188.32.132), 08/23/2014 23:02:11
→ web2312: 推測有些場景瞬間最高碼率可能到15Mbps以上,因此不是 08/24 01:28
→ web2312: 一下子就開始明顯delay,而是慢慢累積造成的 08/24 01:29
→ Trierry77: CPU不夠力,ref、bframe都很高,本身解碼就已經吃力了 08/24 01:48
→ Trierry77: 已經用Lavfilter了,cpu負載還降不下來,就放棄吧 08/24 01:50
→ asusxcomae86: MPC-HC FPS有穩定嗎?我記得ctrl+H還是J可以看 08/30 01:08
→ asusxcomae86: lag是一開始就卡住還是可以撥放但是慢慢開始lag? 08/30 01:08
→ asusxcomae86: 如果是慢慢開始影音不同步,則可能是音效解碼設定 08/30 01:09
→ asusxcomae86: 要修改,撥不動應該是那種一開始畫面就會有些微撕裂 08/30 01:09
→ asusxcomae86: 抑或有感頓挫,但音效絕對是正常不然就是直接斷續 08/30 01:10