[問題] Segger JLink adapter initialized fail

[linchadwick (chad)]

Mian Chip: QCA IPQ4018
Status:
I am using Segger JLink adapter and auto configuration and this is what I get
when I try to connect to it with the OpenOCD:
 Info : J-Link V9 compiled Oct  6 2017 16:38:28
 Info : Hardware version: 9.30
 Info : VTarget = 3.409 V
 Info : clock speed 100 kHz
 Info : TAP auto0.tap does not have IDCODE
 Info : TAP auto1.tap does not have IDCODE
 Info : JTAG tap: auto2.tap tap/device found: 0x5ba00477 (mfg: 0x23b (ARM
Ltd.), part: 0xba00, ver: 0x5)
 Info : JTAG tap: auto3.tap tap/device found: 0x000016dd (mfg: 0x36e
(Certicom Corporation), part: 0x0001, ver: 0x0)
 Info : JTAG tap: auto4.tap tap/device found: 0x009780e1 (mfg: 0x070
(Qualcomm), part: 0x0978, ver: 0x0)
 Error: Could not initialize the debug port

Questions:
1. Is auto2.tap Cortex core?
2. How to congigure it correctly for OpenOCD?

--
※ 發信站: 批踢踢實業坊(ptt.cc), 來自: 36.225.140.88
※ 文章網址: https://www.ptt.cc/bbs/ASM/M.1514518321.A.062.html
→ zxzx8059: 正版就找代理商，迷版就...