※ 引述《playbird (無止境的無聊)》之銘言：
: 標題: [問題] Rooting Remix Mini 有問題
: 時間: Wed Jan 27 21:49:22 2016
:
: http://23pin.logdown.com/posts/435610
:
: 照著前輩的方法做
:
: 到了$ screen /dev/tty.usbserial 115200這步驟
:
: 我是使用Windows + putty
:
: 也看得到remix mini 的訊息在 putty顯示
:
: .... <skip> 這邊就看不懂
:
: root@rm1tw# 自然就跳不到這步驟
:
: 請問有人可以協助嗎? 謝謝
:
: --
: ※ 發信站: 批踢踢實業坊(ptt.cc), 來自: 220.135.147.49
: ※ 文章網址: https://www.ptt.cc/bbs/AndroidDev/M.1453902565.A.C0F.html
: 推 jiqian: 他應該只是說那邊系統會跑東西 所以他跳過吧 01/28 17:09
: → jiqian: 可以看一下LOG嗎~ 01/28 17:09
LOG在這裡 謝謝
=~=~=~=~=~=~=~=~=~=~=~= PuTTY log 2016.01.28 20:47:15 =~=~=~=~=~=~=~=~=~=~=~=
sbrom commit : 8
set pll start
set pll end
try to probe rtc region
rtc[0] value = 0x00000000
rtc[1] value = 0x00000000
rtc[2] value = 0x00000000
rtc[3] value = 0x00000000
rtc[4] value = 0x00000000
rtc[5] value = 0x00000000
flag=0x00000000
try to init dram
DRAM driver version: V1.1
rsb_send_initseq: rsb clk 400Khz -> 3Mhz
PMU: AXP81X
ddr voltage = 1500 mv
DRAM Type = 3 (2:DDR2,3:DDR3,6:LPDDR2,7:LPDDR3)
DRAM clk = 672 MHz
DRAM zq value: 003d3ddd
DRAM init OK
DRAM size = 2048 MB
DRAM init ok
init dram ok, size=2048M
try to setup mmu
mmu setup ok
init heap
init gic
init flash
[mmc]: mmc driver ver 2015-09-24 15:58
[mmc]: ***Try MMC card 2***
[mmc]: MMC 5.0
[mmc]: HSDDR52/DDR50 4 bit
[mmc]: 50000000 Hz
[mmc]: 14910 MB
[mmc]: ***SD/MMC 2 init OK!!!***
*******************TOC1 Head Message*************************
Toc_name = sunxi-secure
Toc_magic = 0x89119800
Toc_add_sum = 0x53cbcab8
Toc_serial_num = 0x00000000
Toc_status = 0x00000000
Toc_items_nr = 0x00000009
Toc_valid_len = 0x00118000
TOC_MAIN_END = 0x3b45494d
***************************************************************
*******************TOC1 Item Message*************************
Entry_name = rootkey
Entry_data_offset = 0x00001000
Entry_data_len = 0x00000d9c
encrypt = 0x00000000
Entry_type = 0x00000000
run_addr = 0x00000000
index = 0x00000000
Entry_call = 0x00000000
Entry_end = 0x3b454949
***************************************************************
*******************TOC1 Item Message*************************
Entry_name = monitor
Entry_data_offset = 0x00002000
Entry_data_len = 0x00000362
encrypt = 0x00000000
Entry_type = 0x00000002
run_addr = 0x00000000
index = 0x00000000
Entry_call = 0x00000000
Entry_end = 0x3b454949
***************************************************************
*******************TOC1 Item Message*************************
Entry_name = monitor
Entry_data_offset = 0x00002400
Entry_data_len = 0x0000b1b8
encrypt = 0x00000000
Entry_type = 0x00000003
run_addr = 0x40000000
index = 0x00000000
Entry_call = 0x40000000
Entry_end = 0x3b454949
***************************************************************
*******************TOC1 Item Message*************************
Entry_name = scp
Entry_data_offset = 0x0000d800
Entry_data_len = 0x0000035e
encrypt = 0x00000000
Entry_type = 0x00000002
run_addr = 0x00000000
index = 0x00000000
Entry_call = 0x00000000
Entry_end = 0x3b454949
***************************************************************
*******************TOC1 Item Message*************************
Entry_name = scp
Entry_data_offset = 0x0000dc00
Entry_data_len = 0x00019a80
encrypt = 0x00000000
Entry_type = 0x00000003
run_addr = 0x00000000
index = 0x00000000
Entry_call = 0x00000000
Entry_end = 0x3b454949
***************************************************************
*******************TOC1 Item Message*************************
Entry_name = boot
Entry_data_offset = 0x00027800
Entry_data_len = 0x0000035f
encrypt = 0x00000000
Entry_type = 0x00000002
run_addr = 0x00000000
index = 0x00000000
Entry_call = 0x00000000
Entry_end = 0x3b454949
***************************************************************
*******************TOC1 Item Message*************************
Entry_name = recovery
Entry_data_offset = 0x00027c00
Entry_data_len = 0x00000363
encrypt = 0x00000000
Entry_type = 0x00000002
run_addr = 0x00000000
index = 0x00000000
Entry_call = 0x00000000
Entry_end = 0x3b454949
***************************************************************
*******************TOC1 Item Message*************************
Entry_name = u-boot
Entry_data_offset = 0x00028000
Entry_data_len = 0x00000361
encrypt = 0x00000000
Entry_type = 0x00000002
run_addr = 0x00000000
index = 0x00000000
Entry_call = 0x00000000
Entry_end = 0x3b454949
***************************************************************
*******************TOC1 Item Message*************************
Entry_name = u-boot
Entry_data_offset = 0x00028400
Entry_data_len = 0x000ec000
encrypt = 0x00000000
Entry_type = 0x00000003
run_addr = 0x4a000000
index = 0x00000000
Entry_call = 0x4a000000
Entry_end = 0x3b454949
***************************************************************
probe root certif
certif valid: the root key is valid
find monitor key stored in root certif
ready to run monitor
find scp key stored in root certif
set arisc reset to de-assert state
find boot key stored in root certif
find recovery key stored in root certif
find u-boot key stored in root certif
ready to run u-boot
sbromsw_toc1_traverse find out all items
monitor entry=0x40000000
uboot entry=0x4a000000
0xffffffff 0xffffffff
0xff1fffff 0xffffffff
0xff11ffff 0xffffffff
0x1515ffff 0xffff2014
0x0b18ffff 0xffffffff
storage_type=2
dram = 2048 M
Z巠=? Configuring SPC Controller
NOTICE: BL3-1: v1.0(debug):f6fa4da
NOTICE: BL3-1: Built : 10:32:52, Sep 11 2015
NOTICE: BL3-1 commit: f6fa4da980d4486e06482fb4e21fec9c9584d92d
INFO: BL3-1: Initializing runtime services
INFO: BL3-1: Preparing for EL3 exit to normal world
INFO: BL3-1: Next image address = 0x4a000000
INFO: BL3-1: Next image spsr = 0x1d3
U-Boot 2014.07 (Oct 16 2015 - 16:19:09) Allwinner Technology
uboot commit : c269a9dfab203bc3b00a38a0ae4e8f0a1bcfca23
reg=0x0
secure mode: with secureos
rsb: secure monitor exist
[ 1.518]pmbus: ready
[ 1.520][ARISC] :arisc initialize
[ 1.662][ARISC] :arisc_dvfs_cfg_vf_table: support only one vf_table
[ 1.748][ARISC] :arisc para ok
[SCP] :sunxi-arisc driver begin startup 2
[SCP] :arisc_para size:240
[SCP] :arisc version: [v0.1.90]
[SCP] :sunxi-arisc driver v1.10 is starting
[ 1.765][ARISC] :sunxi-arisc driver startup succeeded
[ 1.787]PMU: AXP81X
[ 1.789]PMU: AXP81X found
bat_vol=0, ratio=0
[ 1.810]PMU: dcdc2 1100
[ 1.851]PMU: cpux 1008 Mhz,AXI=336 Mhz
PLL6=600 Mhz,AHB1=200 Mhz, APB1=100Mhz AHB2=300Mhz MBus=400Mhz
device_type = 3253, onoff=1
dcdc1_vol = 3300, onoff=1
dcdc2_vol = 1100, onoff=1
dcdc6_vol = 1200, onoff=1
aldo1_vol = 3300, onoff=0
aldo2_vol = 3300, onoff=1
aldo3_vol = 3000, onoff=1
dldo1_vol = 3300, onoff=1
dldo2_vol = 3100, onoff=1
dldo3_vol = 2800, onoff=0
dldo4_vol = 3300, onoff=0
eldo1_vol = 1800, onoff=1
eldo2_vol = 1800, onoff=0
eldo3_vol = 1800, onoff=0
fldo2_vol = 1100, onoff=1
gpio0_vol = 3100, onoff=0
vbus not exist
no battery, limit to dc
run key detect
no key found
no uart input
DRAM: 2 GiB
fdt addr: 0xb6ea26c0
Relocation Offset is: 75ef5000
In: serial
Out: serial
Err: serial
gic: sec monitor mode
boot_init_gpio used
sprite recovery not used
workmode = 0,storage type = 2
[ 2.215]MMC: 2
[mmc]: mmc driver ver 2015-08-14 18:40:00
[mmc]: get sdc_ex_dly_used 2, use auto tuning sdly
[mmc]: card2 io is 1.8V.
SUNXI SD/MMC: 2
[mmc]: start mmc_calibrate_delay_unit, don't access device...
[mmc]: delay chain cal done, sample: 166(ps)
[mmc]: delay chain cal done, ds: 166(ps)
[mmc]: media type 0x8000000
[mmc]: ************Try MMC card 2************
[mmc]: host caps: 0x1ef
[mmc]: MID 000015 PSN 079f5a5e
[mmc]: PNM AGND3R -- 0x41-47-4e-44-33
[mmc]: PRV 0.1
[mmc]: MDT m-10 y-2015
[mmc]: MMC v5.0
[mmc]: speed mode : HSSDR52/SDR25
[mmc]: clock : 50000000 Hz
[mmc]: bus_width : 8 bit
[mmc]: user capacity : 14910 MB
[mmc]: boot capacity : 4096 KB
[mmc]: rpmb capacity : 4096 KB
[mmc]: ************SD/MMC 2 init OK!!!************
[mmc]: erase_grp_size : 0x400WrBlk*0x200=0x80000 Byte
[mmc]: secure_feature : 0x55
[mmc]: secure_removal_type : 0x9
[mmc]: EOL Info(Rev blks): Normal
[mmc]: Wear out(type A): 0%-10% life time used
[mmc]: Wear out(type B): 0%-10% life time used
[ 2.465]sunxi flash init ok
out of usb burn from boot: without usb
[ 2.490]start
drv_disp_init
init_clocks: finish init_clocks.
enable power vcc-hdmi-33, ret=0
drv_disp_init finish
reading disp_rsl.fex
FAT: Misaligned buffer address (b6e94368)
8 bytes read in 6 ms (1000 Bytes/s)
display resolution 10, type 4
display output attr: type 4, used 1, channel 0, mode 10
reading disp_rsl.fex
FAT: Misaligned buffer address (b6e94368)
8 bytes read in 6 ms (1000 Bytes/s)
could not get output resolution for 'cvbs_channel'
display output attr: type 2, used 1, channel 1, mode 11
boot_disp.auto_hpd=1
boot_disp.hdmi_mode_check=1
boot_disp.output_type=3
plugin
auto hpd result: hdmi_connect=1, cvbs_connect=0!
vendor_id=4c2de90b
reading tv_vdid.fex
[mmc]: blkcnt should not be 0
11 bytes read in 5 ms (2 KiB/s)
pvendor_id=4c, ret=0x4c, vendorID=0x4c000000
pvendor_id=2d, ret=0x2d, vendorID=0x4c2d0000
pvendor_id=e9, ret=0xe9, vendorID=0x4c2de900
pvendor_id=b, ret=0xb, vendorID=0x4c2de90b
disp0 device type(4) enable, already enable prepare
attched ok, mgr0<-->device0, type=4, mode=10
[ 3.822]end
--------fastboot partitions--------
-total partitions:14-
-name- -start- -size-
bootloader : 1000000 1000000
env : 2000000 1000000
boot : 3000000 2000000
system : 5000000 4ccccc00
verity_block: 51cccc00 3000000
misc : 54cccc00 1000000
recovery : 55cccc00 2000000
private : 57cccc00 1000000
alog : 58cccc00 4000000
Reserve0 : 5ccccc00 1000000
Reserve1 : 5dcccc00 2000000
Reserve2 : 5fcccc00 1000000
cache : 60cccc00 30000000
UDISK : 90cccc00 0
-----------------------------------
base bootcmd=run setargs_nand boot_normal
bootcmd set setargs_mmc
misc partition found
to be run cmd=run setargs_mmc boot_normal
read item0 copy0
the secure storage item0 copy0 is good
no item name initcall_debug in the map
sunxi storage read fail
no item name cma in the map
sunxi storage read fail
name in map mac
the secure storage item2 copy0 is good
Don't need to decrypt object
update mac = 40:9F:87:0A:EF:39
no item name wifi_mac in the map
sunxi storage read fail
no item name bt_mac in the map
sunxi storage read fail
no item name specialstr in the map
sunxi storage read fail
no item name androidboot.serialno in the map
sunxi storage read fail
name in map serialno
the secure storage item3 copy0 is good
Don't need to decrypt object
update serialno = JS2U300154810032
check user data form private
update dtb dram start
update dtb dram end
serial is: 940050344204142b064b
no battery exist
[boot_disp] adver need show
reading advert.crc
** Unable to read file advert.crc **
sunxi bmp info error : unable to open logo file sunxi_flash
cat not find the advert.crc
verify the advert.crc failed
sunxi_advert_display failed,display default logo
reading bootlogo.bmp
3686456 bytes read in 89 ms (39.5 MiB/s)
screen_id =0, screen_width =1920, screen_height =1080
frame buffer address 47400036
[ 4.383]inter uboot shell
Hit any key to stop autoboot: 0
read partition: boot or recovery
[ 4.875]sunxi flash read :offset 3000000, 17548405 bytes OK
Kernel load addr 0x41080000 size 12709 KiB
RAM disk load addr 0x42000000 size 3405 KiB
total_len=16504832
[ 5.065]ready to boot
prepare for kernel
[mmc]: mmc exit start
[mmc]: start mmc_calibrate_delay_unit, don't access device...
[mmc]: delay chain cal done, sample: 166(ps)
[mmc]: delay chain cal done, ds: 166(ps)
[mmc]: mmc 2 exit ok
Starting kernel ...
INFO: BL3-1: Next image address = 0x41080000
INFO: BL3-1: Next image spsr = 0x3c5
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 3.10.87 (jenkins@pallas.corp.jide.com) (gcc
version 4.9.3 20150113 (prerelease) (Linaro GCC 4.9-2015.01-3) ) #1 SMP
PREEMPT Thu Nov 26 21:41:29 CST 2015
[ 0.000000] CPU: AArch64 Processor [410fd034] revision 4
[ 0.000000] Machine: sun50iw1p1
[ 0.000000] bootconsole [earlycon0] enabled
[ 0.000000] cma: CMA: reserved 300 MiB at ad400000
[ 0.000000] On node 0 totalpages: 520192
[ 0.000000] DMA zone: 7112 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 520192 pages, LIFO batch:31
[ 0.000000] script_init enter!
[ 0.000000] script_init exit!
[ 0.000000] psci: probing for conduit method from DT.
[ 0.000000] psci: PSCIv0.2 detected in firmware.
[ 0.000000] psci: Using standard PSCI v0.2 function IDs
[ 0.000000] PERCPU: Embedded 12 pages/cpu @ffffffc06c379000 s19072 r8192
d21888 u49152
[ 0.000000] pcpu-alloc: s19072 r8192 d21888 u49152 alloc=12*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total
pages: 513080
[ 0.000000] Kernel command line: earlyprintk=sunxi-uart,0x01c28000
initcall_debug=0 console=ttyS0,115200 loglevel=8 root=/dev/mmcblk0p7
init=/init
partitions=bootloader@mmcblk0p2:env@mmcblk0p5:boot@mmcblk0p6:system@mmcblk0p7:verity_block@mmcblk0p8:misc@mmcblk0p9:recovery@mmcblk0p10:private@mmcblk0p11:alog@mmcblk0p12:Reserve0@mmcblk0p13:Reserve1@mmcblk0p14:Reserve2@mmcblk0p15:cache@mmcblk0p16:UDISK@mmcblk0p1
cma=300M mac_addr=40:9F:87:0A:EF:39 wifi_mac= bt_mac= specialstr=
androidboot.serialno=JS2U300154810032 serialno=JS2U300154810032 boot_type=2
androidboot.hardware=sun50iw1p1
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Dentry cache hash table entries: 262144 (order: 9, 2097152
bytes)
[ 0.000000] Inode-cache hash table entries: 131072 (order: 8, 1048576
bytes)
[ 0.000000] Memory: 2032MB = 2032MB total
[ 0.000000] Memory: 1721816k/1721816k available, 358952k reserved
[ 0.000000] Virtual kernel memory layout:
[ 0.000000] vmalloc : 0xffffff8000000000 - 0xffffffbbffff0000
(245759 MB)
[ 0.000000] vmemmap : 0xffffffbc00e38000 - 0xffffffbc02a00000 (
27 MB)
[ 0.000000] modules : 0xffffffbffc000000 - 0xffffffc000000000 (
64 MB)
[ 0.000000] memory : 0xffffffc000000000 - 0xffffffc07f000000 (
2032 MB)
[ 0.000000] .init : 0xffffffc000aea000 - 0xffffffc000b75a80 (
559 kB)
[ 0.000000] .text : 0xffffffc000080000 - 0xffffffc000ae9704 (
10662 kB)
[ 0.000000] .data : 0xffffffc000b76000 - 0xffffffc000ce9260 (
1485 kB)
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] NR_IRQS:64 nr_irqs:64 0
[ 0.000000] Architected cp15 timer(s) running at 24.00MHz (virt).
[ 0.000000] Console: colour dummy device 80x25
[ 0.010000] Calibrating delay loop (skipped), value calculated using timer
frequency.. 48.00 BogoMIPS (lpj=240000)
[ 0.012454] pid_max: default: 32768 minimum: 301
[ 0.017400] Security Framework initialized
[ 0.020018] SELinux: Initializing.
[ 0.023558] SELinux: Starting in permissive mode
[ 0.028285] Mount-cache hash table entries: 256
[ 0.031836] Initializing cgroup subsys debug
[ 0.034179] Initializing cgroup subsys freezer
[ 0.038702] ftrace: allocating 28396 entries in 111 pages
[ 0.070761] CPU0: update cpu_power 1968128
[ 0.072522] virtual base = 0xffffff800000a000.
[ 0.073688] gicd_base = 0xffffff800000c000.
[ 0.077859] gicc_base = 0xffffff800000e000.
[ 0.010000] CPU1: Booted secondary processor
[ 0.010000] CPU1: update cpu_power 1968128
[ 0.010000] CPU2: Booted secondary processor
[ 0.010000] CPU2: update cpu_power 1968128
[ 0.010000] CPU3: Booted secondary processor
[ 0.010000] CPU3: update cpu_power 1968128
[ 0.081840] Brought up 4 CPUs
[ 0.090012] SMP: Total of 4 processors activated (192.00 BogoMIPS).
[ 0.096929] devtmpfs: initialized
[ 0.126384] atomic64 test passed
[ 0.126384] pinctrl core: initialized pinctrl subsystem
[ 0.140540] NET: Registered protocol family 16
[ 0.141188] script_sysfs_init success
[ 0.141873] dump_class_init,806, success
[ 0.141873] vdso: 2 pages (1 code, 1 data) at base ffffffc000b7d000
[ 0.150021] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
[ 0.157895] software IO TLB [mem 0xaa400000-0xaa800000] (4MB) mapped at
[ffffffc069400000-ffffffc0697fffff]
[ 0.160739] DMA: preallocated 256 KiB pool for atomic allocations
[ 0.165650] axp81x_board_init: axp regl_devs num = 23
[ 0.170186] pll_audio-set_default_rate=24576000 success!
[ 0.175032] pll_video0-set_default_rate=297000000 success!
[ 0.180039] pll_ve-set_default_rate=420000000 success!
[ 0.185106] pll_video1-set_default_rate=297000000 success!
[ 0.190134] pll_de-set_default_rate=432000000 success!
[ 0.195340] ahb1-set_default_rate=200000000 success!
[ 0.200899] de-set_default_source=pll_de success!
[ 0.204603] de-set_default_rate=432000000 success!
[ 0.209347] tcon0-set_default_source=pll_mipi success!
[ 0.210047] tcon1-set_default_source=pll_video0 success!
[ 0.215513] hdmi-set_default_source=pll_video0 success!
[ 0.221796] adda_com_reg_readl: reg = 0xffffff80000545c0
[ 0.225200] adda_com_reg_readl: reg = 0xffffff80000545c0
[ 0.230000] adda_com_reg_writel: val = 0x40, reg = 0xffffff80000545c0
[ 0.230939] sun50i-r-pinctrl 1f02c00.pinctrl: initialized sunXi PIO driver
[ 0.236084] [sun50iw1p1_pinctrl_probe][837]
[ 0.242496] sun50i-pinctrl 1c20800.pinctrl: initialized sunXi PIO driver
[ 0.246779] sunxi hwspinlock vbase:0xffffff800005c000
[ 0.270233] sunxi_chipid_probe,205: soc bin:0
[ 0.320360] bio: create slab <bio-0> at 0
[ 0.330461] pwm module init!
[ 0.330936] SCSI subsystem initialized
[ 0.330936] usbcore: registered new interface driver usbfs
[ 0.340094] usbcore: registered new interface driver hub
[ 0.345246] usbcore: registered new device driver usb
[ 0.350602] Linux video capture interface: v2.00
[ 0.353738] [ARISC] :sunxi-arisc driver v1.10
[ 0.370396] [ARISC] :sunxi-arisc driver v1.10 startup succeeded
[ 0.370592] Advanced Linux Sound Architecture Driver Initialized.
[ 0.380380] Bluetooth: Core ver 2.16
[ 0.382392] NET: Registered protocol family 31
[ 0.384163] Bluetooth: HCI device and connection manager initialized
[ 0.390032] Bluetooth: HCI socket layer initialized
[ 0.394791] Bluetooth: L2CAP socket layer initialized
[ 0.399771] Bluetooth: SCO socket layer initialized
[ 0.400552] cfg80211: Calling CRDA to update world regulatory domain
[ 0.405510] [pm]aw_pm_init!
[ 0.405510] rtc physical base = 0x0000000001f00000 .
[ 0.410044] np name = /soc@01c00000/rtc@01f00000.
[ 0.414683] base = ffffff800006e100, len = 4.
[ 0.418946] pmu name: pmu0 .
[ 0.420044] pmu0_enable = 0x1.
[ 0.423068] pmux_id = 0x6.
[ 0.425798] pmux_twi_id = 0x1.
[ 0.428867] pmux_twi_addr = 0x34.
[ 0.430007] pmu name: pmu1 .
[ 0.432861] Warning: can not find np for pmu1.
[ 0.437681] after inited: sys_mask config = 0xca55.
[ 0.440040] Warning: can not find np for dynamic_standby_para.
[ 0.445920] [pm]valid
[ 0.448013] [pm]valid
[ 0.450006] Notice: sun9i&sun8iw5&sun50i not need support normal standby,
change to super standby.
[ 0.459246] i2c-core: driver [ACX00-CHIP] using legacy suspend method
[ 0.460008] i2c-core: driver [ACX00-CHIP] using legacy resume method
[ 0.466236] acx00_detect, l:312, twi_id:0, adapter->nr:0
[ 0.470135] acx00_i2c_probe,l:222
[ 0.473221] acx00_init_work,l:90
[ 0.476421] acx00_detect, l:312, twi_id:0, adapter->nr:1
[ 0.480531] Switching to clocksource arch_sys_counter
[ 0.523546] FS-Cache: Loaded
[ 0.524144] CacheFiles: Loaded
[ 0.551748] NET: Registered protocol family 2
[ 0.553456] TCP established hash table entries: 16384 (order: 6, 262144
bytes)
[ 0.557854] TCP bind hash table entries: 16384 (order: 6, 262144 bytes)
[ 0.564581] TCP: Hash tables configured (established 16384 bind 16384)
[ 0.571945] TCP: reno registered
[ 0.573920] UDP hash table entries: 1024 (order: 3, 32768 bytes)
[ 0.579842] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes)
[ 0.587113] NET: Registered protocol family 1
[ 0.591249] acx00_init_work,l:93
[ 0.594578] RPC: Registered named UNIX socket transport module.
[ 0.599644] RPC: Registered udp transport module.
[ 0.604494] RPC: Registered tcp transport module.
[ 0.609075] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 0.616459] Unpacking initramfs...
[ 0.797565] Freeing initrd memory: 3404K (ffffffc001000000 -
ffffffc001353000)
[ 0.801765] lock super standby defaultly!
[ 0.803235] lookup_scene_lock_name: new scene lock super_standby
[ 0.809112] scene_lock_init name=super_standby
[ 0.813678] scene_lock: super_standby, type 5, count 1
[ 0.820185] audit: initializing netlink socket (disabled)
[ 0.824170] type=2000 audit(0.820:1): initialized
[ 0.833481] FS-Cache: Netfs 'nfs' registered for caching
[ 0.835305] FS-Cache: Netfs 'cifs' registered for caching
[ 0.840330] NTFS driver 2.1.30 [Flags: R/W].
[ 0.843918] fuse init (API version 7.22)
[ 0.848807] msgmni has been set to 3969
[ 0.851567] SELinux: Registering netfilter hooks
[ 0.858702] NET: Registered protocol family 38
[ 0.860740] io scheduler noop registered
[ 0.864381] io scheduler deadline registered
[ 0.868666] io scheduler cfq registered (default)
[ 0.874785] [DISP]disp_module_init
[ 0.877679] [DISP] init_disp:0x20b040a
[ 0.880506] [DISP] boot_disp:0x40a
[ 0.884567] [DISP]
disp_sys_script_get_item,line:193:of_find_compatible_node
allwinner,sunxi-lcd1 fail
[ 0.893279] [DISP]
disp_sys_script_get_item,line:193:of_find_compatible_node
allwinner,sunxi-lcd1 fail
[ 0.902680] [DISP]
disp_sys_script_get_item,line:193:of_find_compatible_node
allwinner,sunxi-lcd1 fail
[ 0.912812] [DISP] fb_base:0x47400000
[ 0.927952] [DISP]disp_module_init finish
[ 0.928753] uart0: ttyS0 at MMIO 0x1c28000 (irq = 32) is a SUNXI
[ 0.932358] sw_uart_pm()864 - uart0 clk is already enable
[ 0.937602] sw_console_setup()1173 - console setup baud 115200 parity n
bits 8, flow n
[ 0.945660] console [ttyS0] enabled, bootconsole disabled
[ 0.945660] console [ttyS0] enabled, bootconsole disabled
[ 0.958052] uart1: ttyS1 at MMIO 0x1c28400 (irq = 33) is a SUNXI
[ 0.971336] misc dump reg init
[ 0.982847] loop: module loaded
[ 0.986613] sunxi-bt bt.33: bt_power_name (vcc-wifi)
[ 0.992207] sunxi-bt bt.33: io_regulator_name (vcc-wifi-io)
[ 0.998325] sunxi-bt bt.33: bt_rst gpio=356 mul-sel=1 pull=-1
drv_level=-1 data=0
[ 1.007809] sunxi-bt bt.33: block state already is 1
[ 1.013811] sunxi-wlan wlan.32: wlan_busnum (1)
[ 1.018762] sunxi-wlan wlan.32: wlan_power_name (vcc-wifi)
[ 1.024950] sunxi-wlan wlan.32: io_regulator_name (vcc-wifi-io)
[ 1.031549] sunxi-wlan wlan.32: wlan_regon gpio=354 mul-sel=1 pull=-1
drv_level=-1 data=0
[ 1.041045] sunxi-wlan wlan.32: wlan_hostwake gpio=355 mul-sel=6 pull=-1
drv_level=-1 data=0
[ 1.058482] tun: Universal TUN/TAP device driver, 1.6
[ 1.064110] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 1.071947] WARNING: Get ephy clock is failed
[ 1.078102] PPP generic driver version 2.4.2
[ 1.083415] PPP BSD Compression module registered
[ 1.088558] PPP Deflate Compression module registered
[ 1.094279] PPP MPPE Compression module registered
[ 1.099509] NET: Registered protocol family 24
[ 1.104577] PPTP driver version 0.8.5
[ 1.108834] hso: drivers/net/usb/hso.c: Option Wireless
[ 1.115250] usbcore: registered new interface driver hso
[ 1.121379] usbcore: registered new interface driver asix
[ 1.127585] usbcore: registered new interface driver ax88179_178a
[ 1.134570] usbcore: registered new interface driver cdc_ether
[ 1.141254] usbcore: registered new interface driver net1080
[ 1.147734] usbcore: registered new interface driver cdc_subset
[ 1.154511] usbcore: registered new interface driver zaurus
[ 1.160944] usbcore: registered new interface driver cdc_ncm
[ 1.167122] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.174697] get ehci0-controller drv_vbus_gpio is fail
[ 1.180412] get ehci0-controller, regulator_io is no nocare
[ 1.186567] [sunxi-ehci0]: probe, pdev->name: 1c1a000.ehci0-controller,
sunxi_ehci: 0xffffffc000dde940, 0x:ffffff80000a6000, irq_no:68
[ 1.200158] sunxi-ehci 1c1a000.ehci0-controller: SW USB2.0 'Enhanced' Host
Controller (EHCI) Driver
[ 1.210233] sunxi-ehci 1c1a000.ehci0-controller: new USB bus registered,
assigned bus number 1
[ 1.220315] sunxi-ehci 1c1a000.ehci0-controller: irq 104, io mem
0xffffffc000483030
[ 1.240036] sunxi-ehci 1c1a000.ehci0-controller: USB 0.0 started, EHCI 1.00
[ 1.247772] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.255447] usb usb1: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 1.263474] usb usb1: Product: SW USB2.0 'Enhanced' Host Controller (EHCI)
Driver
[ 1.271789] usb usb1: Manufacturer: Linux 3.10.87 ehci_hcd
[ 1.277779] usb usb1: SerialNumber: sunxi-ehci
[ 1.283822] hub 1-0:1.0: USB hub found
[ 1.287938] hub 1-0:1.0: 1 port detected
[ 1.292665] scene_lock_init name=ehci_standby
[ 1.297420] [ehci0-controller]: sunxi_usb_disable_ehci
[ 1.303215] [sunxi-ehci0]: remove, pdev->name: 1c1a000.ehci0-controller,
sunxi_ehci: 0xffffffc000dde940
[ 1.313658] scene_lock_destroy name=ehci_standby
[ 1.318700] sunxi-ehci 1c1a000.ehci0-controller: remove, state 1
[ 1.325464] usb usb1: USB disconnect, device number 1
[ 1.332870] sunxi-ehci 1c1a000.ehci0-controller: USB bus 1 deregistered
[ 1.340407] get ehci1-controller, regulator_io is no nocare
[ 1.346711] [sunxi-ehci1]: probe, pdev->name: 1c1b000.ehci1-controller,
sunxi_ehci: 0xffffffc000ddebb0, 0x:ffffff80000ae000, irq_no:6a
[ 1.360406] sunxi-ehci 1c1b000.ehci1-controller: SW USB2.0 'Enhanced' Host
Controller (EHCI) Driver
[ 1.370479] sunxi-ehci 1c1b000.ehci1-controller: new USB bus registered,
assigned bus number 1
[ 1.380501] sunxi-ehci 1c1b000.ehci1-controller: irq 106, io mem
0xffffffc000483030
[ 1.400030] sunxi-ehci 1c1b000.ehci1-controller: USB 0.0 started, EHCI 1.00
[ 1.407636] ehci_irq: highspeed device connect
[ 1.412818] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.420367] usb usb1: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 1.428256] usb usb1: Product: SW USB2.0 'Enhanced' Host Controller (EHCI)
Driver
[ 1.436699] usb usb1: Manufacturer: Linux 3.10.87 ehci_hcd
[ 1.442795] usb usb1: SerialNumber: sunxi-ehci
[ 1.448663] hub 1-0:1.0: USB hub found
[ 1.452858] hub 1-0:1.0: 1 port detected
[ 1.457408] scene_lock_init name=ehci_standby
[ 1.462735] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.469686] get ohci0-controller drv_vbus_gpio is fail
[ 1.475512] get ohci0-controller, regulator_io is no nocare
[ 1.481788] [sunxi-ohci0]: probe, pdev->name: 1c1a000.ohci0-controller,
sunxi_ohci: 0xffffffc000dde460
[ 1.492198] sunxi-ohci 1c1a000.ohci0-controller: SW USB2.0 'Open' Host
Controller (OHCI) Driver
[ 1.501897] sunxi-ohci 1c1a000.ohci0-controller: new USB bus registered,
assigned bus number 2
[ 1.511532] sunxi-ohci 1c1a000.ohci0-controller: irq 105, io mem
0x2c6a626e6b61ff72
[ 1.584065] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.591682] usb usb2: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 1.599571] usb usb2: Product: SW USB2.0 'Open' Host Controller (OHCI)
Driver
[ 1.607629] usb usb2: Manufacturer: Linux 3.10.87 ohci_hcd
[ 1.613725] usb usb2: SerialNumber: sunxi-ohci
[ 1.619549] hub 2-0:1.0: USB hub found
[ 1.623754] hub 2-0:1.0: 1 port detected
[ 1.628303] scene_lock_init name=ohci_standby
[ 1.633221] [ohci0-controller]: sunxi_usb_disable_ohci
[ 1.638831] [sunxi-ohci0]: remove, pdev->name: 1c1a000.ohci0-controller,
sunxi_ohci: 0xffffffc000dde460
[ 1.649357] scene_lock_destroy name=ohci_standby
[ 1.654514] sunxi-ohci 1c1a000.ohci0-controller: remove, state 1
[ 1.661203] usb usb2: USB disconnect, device number 1
[ 1.667602] sunxi-ohci 1c1a000.ohci0-controller: USB bus 2 deregistered
[ 1.675111] get ohci1-controller, regulator_io is no nocare
[ 1.681358] hci: request ohci1-controller gpio:1027
[ 1.686712] [sunxi-ohci1]: probe, pdev->name: 1c1b000.ohci1-controller,
sunxi_ohci: 0xffffffc000dde6d0
[ 1.697280] sunxi-ohci 1c1b000.ohci1-controller: SW USB2.0 'Open' Host
Controller (OHCI) Driver
[ 1.706966] sunxi-ohci 1c1b000.ohci1-controller: new USB bus registered,
assigned bus number 2
[ 1.716595] sunxi-ohci 1c1b000.ohci1-controller: irq 107, io mem
0x2c6a626e6b61ff72
[ 1.770038] usb 1-1: new high-speed USB device number 2 using sunxi-ehci
[ 1.784064] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.791684] usb usb2: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 1.799579] usb usb2: Product: SW USB2.0 'Open' Host Controller (OHCI)
Driver
[ 1.807641] usb usb2: Manufacturer: Linux 3.10.87 ohci_hcd
[ 1.813731] usb usb2: SerialNumber: sunxi-ohci
[ 1.819519] hub 2-0:1.0: USB hub found
[ 1.823713] hub 2-0:1.0: 1 port detected
[ 1.828253] scene_lock_init name=ohci_standby
[ 1.833894] usbcore: registered new interface driver usb-storage
[ 1.840785] usbcore: registered new interface driver ums-alauda
[ 1.847555] usbcore: registered new interface driver ums-cypress
[ 1.854435] usbcore: registered new interface driver ums-datafab
[ 1.861315] usbcore: registered new interface driver ums_eneub6250
[ 1.868380] usbcore: registered new interface driver ums-freecom
[ 1.875255] usbcore: registered new interface driver ums-isd200
[ 1.882034] usbcore: registered new interface driver ums-jumpshot
[ 1.888987] usbcore: registered new interface driver ums-karma
[ 1.895765] usbcore: registered new interface driver ums-onetouch
[ 1.902792] usbcore: registered new interface driver ums-realtek
[ 1.909659] usbcore: registered new interface driver ums-sddr09
[ 1.916445] usbcore: registered new interface driver ums-sddr55
[ 1.923400] usbcore: registered new interface driver ums-usbat
[ 1.930423] usb 1-1: New USB device found, idVendor=1a40, idProduct=0101
[ 1.937751] usb 1-1: New USB device strings: Mfr=0, Product=1,
SerialNumber=0
[ 1.945822] usb 1-1: Product: USB 2.0 Hub
[ 1.946451] usbcore: registered new interface driver usbserial
[ 1.946666] usbcore: registered new interface driver option
[ 1.946860] usbserial: USB Serial support registered for GSM modem (1-port)
[ 1.971665] mousedev: PS/2 mouse device common for all mice
[ 1.971882] hub 1-1:1.0: USB hub found
[ 1.972051] hub 1-1:1.0: 4 ports detected
[ 1.986966] usbcore: registered new interface driver xpad
[ 1.993175] usbcore: registered new interface driver usb_acecad
[ 1.999960] usbcore: registered new interface driver aiptek
[ 2.006384] usbcore: registered new interface driver gtco
[ 2.012604] usbcore: registered new interface driver hanwang
[ 2.019084] usbcore: registered new interface driver kbtab
[ 2.025401] usbcore: registered new interface driver wacom
[ 2.033837] sunxi-rtc 1f00000.rtc: rtc core: registered rtc-sunxi as rtc0
[ 2.041430] sunxi-rtc 1f00000.rtc: RTC enabled
[ 2.047028] IR NEC protocol handler initialized
[ 2.052065] IR RC5(x) protocol handler initialized
[ 2.057293] IR RC6 protocol handler initialized
[ 2.062411] IR JVC protocol handler initialized
[ 2.067354] IR Sony protocol handler initialized
[ 2.072563] IR RC5 (streamzap) protocol handler initialized
[ 2.078645] IR SANYO protocol handler initialized
[ 2.083969] IR MCE Keyboard/mouse protocol handler initialized
[ 2.090439] sunxi cedar version 0.1
[ 2.094441] [cedar]: install start!!!
[ 2.098541] ycy the get irq is 90
[ 2.103044] ycy clk_bass_vir 0x18 is ffffff80000c4018, the value:1002201
[ 2.110589] ycy clk_bass_vir 0x13c is ffffff80000c413c, the value:0
[ 2.117526] ycy clk_bass_vir 0x64 is ffffff80000c4064, the value:601810
[ 2.125084] ycy clk_bass_vir 0x2c4 is ffffff80000c42c4, the value:601c10
[ 2.132625] ycy clk_bass_vir 0x100 is ffffff80000c4100, the value:0
[ 2.139561] [cedar]: install end!!!
[ 2.150188] input: axp81x-supplyer as
/devices/platform/axp81x_board/axp81x-supplyer.47/input/input0
[ 2.174889] sunxi budget cooling probe start !
[ 2.179767] CPU freq cooling register Success
[ 2.184720] CPU hotplug cooling register Success
[ 2.190477] CPU budget cooling register Success
[ 2.196274] sunxi gpu cooling probe start !
[ 2.200942] CPU gpu cooling register Success
[ 2.206073] device-mapper: uevent: version 1.0.3
[ 2.211719] device-mapper: ioctl: 4.24.0-ioctl (2013-01-15) initialised:
dm-devel@redhat.com
[ 2.221343] Bluetooth: HCI UART driver ver 2.2
[ 2.226196] Bluetooth: HCI H4 protocol initialized
[ 2.231606] Bluetooth: HCI Realtek H5 protocol initialized
[ 2.237594] rtk_btcoex: rtk_uart_coex_init, version: 1.1
[ 2.243593] rtk_btcoex: create workqueue
[ 2.250190] usb 1-1.3: new full-speed USB device number 3 using sunxi-ehci
[ 2.251322] cpuidle: using governor ladder
[ 2.251324] cpuidle: using governor menu
[ 2.252546] sunxi-mmc 1c11000.sdmmc: SD/MMC/SDIO Host Controller
Driver(v0.24 2015-9-9 15:02) Compiled in Nov 26 2015 at 21:40:58
[ 2.252599] sunxi-mmc 1c11000.sdmmc: regulator prop vmmc,str vcc-emmc
[ 2.252607] sunxi-mmc 1c11000.sdmmc: regulator prop vqmmc,str none
[ 2.252614] sunxi-mmc 1c11000.sdmmc: regulator prop vdmmc,str none
[ 2.252728] sunxi-mmc 1c11000.sdmmc: No vqmmc regulator found
[ 2.252732] sunxi-mmc 1c11000.sdmmc: No vdmmc regulator found
[ 2.314024] sunxi-mmc 1c11000.sdmmc: sdc set ios: clk 0Hz bm PP pm UP vdd
22 width 1 timing LEGACY(SDR12) dt B
[ 2.340027] sunxi-mmc 1c11000.sdmmc: sdc set ios: clk 400000Hz bm PP pm ON
vdd 22 width 1 timing LEGACY(SDR12) dt B
[ 2.370049] sunxi-mmc 1c11000.sdmmc: base:0xffffff80000c6000 irq:94
[ 2.370860] sunxi-mmc 1c11000.sdmmc: smc 0 p2 err, cmd 52, RTO !!
[ 2.371690] sunxi-mmc 1c11000.sdmmc: smc 0 p2 err, cmd 52, RTO !!
[ 2.371708] sunxi-mmc 1c11000.sdmmc: sdc set ios: clk 400000Hz bm PP pm ON
vdd 22 width 1 timing LEGACY(SDR12) dt B
[ 2.374107] sunxi-mmc 1c11000.sdmmc: sdc set ios: clk 400000Hz bm PP pm ON
vdd 22 width 1 timing LEGACY(SDR12) dt B
[ 2.375975] sunxi-mmc 1c11000.sdmmc: smc 0 p2 err, cmd 8, RTO !!
[ 2.376803] sunxi-mmc 1c11000.sdmmc: smc 0 p2 err, cmd 5, RTO !!
[ 2.377627] sunxi-mmc 1c11000.sdmmc: smc 0 p2 err, cmd 5, RTO !!
[ 2.378452] sunxi-mmc 1c11000.sdmmc: smc 0 p2 err, cmd 5, RTO !!
[ 2.379277] sunxi-mmc 1c11000.sdmmc: smc 0 p2 err, cmd 5, RTO !!
[ 2.380105] sunxi-mmc 1c11000.sdmmc: smc 0 p2 err, cmd 55, RTO !!
[ 2.380932] sunxi-mmc 1c11000.sdmmc: smc 0 p2 err, cmd 55, RTO !!
[ 2.381754] sunxi-mmc 1c11000.sdmmc: smc 0 p2 err, cmd 55, RTO !!
[ 2.382577] sunxi-mmc 1c11000.sdmmc: smc 0 p2 err, cmd 55, RTO !!
[ 2.382592] sunxi-mmc 1c11000.sdmmc: sdc set ios: clk 400000Hz bm OD pm ON
vdd 22 width 1 timing LEGACY(SDR12) dt B
[ 2.382944] sunxi-mmc 1c11000.sdmmc: sdc set ios: clk 400000Hz bm OD pm ON
vdd 7 width 1 timing LEGACY(SDR12) dt B
[ 2.382982] sunxi-mmc 1c11000.sdmmc: sdc set ios: clk 400000Hz bm OD pm ON
vdd 7 width 1 timing LEGACY(SDR12) dt B
[ 2.383019] sunxi-mmc 1c11000.sdmmc: sdc set ios: clk 400000Hz bm OD pm ON
vdd 7 width 1 timing LEGACY(SDR12) dt B
[ 2.385412] sunxi-mmc 1c11000.sdmmc: sdc set ios: clk 400000Hz bm OD pm ON
vdd 7 width 1 timing LEGACY(SDR12) dt B
[ 2.401223] sunxi-mmc 1c11000.sdmmc: sdc set ios: clk 400000Hz bm PP pm ON
vdd 7 width 1 timing LEGACY(SDR12) dt B
[ 2.412768] mmc0: BKOPS_EN bit is not set
[ 2.423802] usb 1-1.3: New USB device found, idVendor=046d, idProduct=c534
[ 2.423807] usb 1-1.3: New USB device strings: Mfr=1, Product=2,
SerialNumber=0
[ 2.423812] usb 1-1.3: Product: USB Receiver
[ 2.423816] usb 1-1.3: Manufacturer: Logitech
[ 2.572747] sunxi-mmc 1c11000.sdmmc: *All wait r1 rdy 0 ms*
[ 2.579663] sunxi-mmc 1c11000.sdmmc: *All wait r1 rdy 0 ms*
[ 2.579766] sunxi-mmc 1c0f000.sdmmc: SD/MMC/SDIO Host Controller
Driver(v0.24 2015-9-9 15:02) Compiled in Nov 26 2015 at 21:40:58
[ 2.579802] sunxi-mmc 1c0f000.sdmmc: regulator prop vmmc,str none
[ 2.579809] sunxi-mmc 1c0f000.sdmmc: regulator prop vqmmc,str none
[ 2.579816] sunxi-mmc 1c0f000.sdmmc: regulator prop vdmmc,str vcc-sdc
[ 2.579929] sunxi-mmc 1c0f000.sdmmc: No vmmc regulator found
[ 2.579933] sunxi-mmc 1c0f000.sdmmc: No vqmmc regulator found
[ 2.633045] sunxi-mmc 1c11000.sdmmc: *All wait r1 rdy 0 ms*
[ 2.633144] sunxi-mmc 1c0f000.sdmmc: Got CD GPIO #166.
[ 2.645134] sunxi-mmc 1c0f000.sdmmc: sdc set ios: clk 0Hz bm PP pm UP vdd
21 width 1 timing LEGACY(SDR12) dt B
[ 2.656266] sunxi-mmc 1c11000.sdmmc: sdc set ios: clk 400000Hz bm PP pm ON
vdd 7 width 8 timing LEGACY(SDR12) dt B
[ 2.667791] sunxi-mmc 1c0f000.sdmmc: no vqmmc,Check if there is regulator
[ 2.677410] sunxi-mmc 1c11000.sdmmc: *All wait r1 rdy 0 ms*
[ 2.683616] sunxi-mmc 1c11000.sdmmc: sdc set ios: clk 400000Hz bm PP pm ON
vdd 7 width 8 timing MMC-HS200 dt B
[ 2.690026] sunxi-mmc 1c0f000.sdmmc: sdc set ios: clk 400000Hz bm PP pm ON
vdd 21 width 1 timing LEGACY(SDR12) dt B
[ 2.706344] mmc0: Check switch ready sunxi_mmc_check_timing_switch_done
[ 2.710055] sunxi-mmc 1c0f000.sdmmc: base:0xffffff80000ce000 irq:92
[ 2.710507] sunxi-mmc 1c10000.sdmmc: SD/MMC/SDIO Host Controller
Driver(v0.24 2015-9-9 15:02) Compiled in Nov 26 2015 at 21:40:58
[ 2.710544] sunxi-mmc 1c10000.sdmmc: Can't get vmmc regulator string
[ 2.710549] sunxi-mmc 1c10000.sdmmc: Can't get vqmmc regulator string
[ 2.710553] sunxi-mmc 1c10000.sdmmc: Can't get vdmmc regulator string
[ 2.710556] get() with no identifier
[ 2.710557] get() with no identifier
[ 2.710558] get() with no identifier
[ 2.710562] sunxi-mmc 1c10000.sdmmc: No vmmc regulator found
[ 2.710566] sunxi-mmc 1c10000.sdmmc: No vqmmc regulator found
[ 2.710569] sunxi-mmc 1c10000.sdmmc: No vdmmc regulator found
[ 2.786132] sunxi-mmc 1c11000.sdmmc: sdc set ios: clk 100000000Hz bm PP pm
ON vdd 7 width 8 timing MMC-HS200 dt B
[ 2.786444] sunxi-mmc 1c10000.sdmmc: sdc set ios: clk 0Hz bm PP pm UP vdd
21 width 1 timing LEGACY(SDR12) dt B
[ 2.786462] sunxi-mmc 1c10000.sdmmc: no vqmmc,Check if there is regulator
[ 2.800031] sunxi-mmc 1c10000.sdmmc: sdc set ios: clk 400000Hz bm PP pm ON
vdd 21 width 1 timing LEGACY(SDR12) dt B
[ 2.820056] sunxi-mmc 1c10000.sdmmc: base:0xffffff80000d6000 irq:93
[ 2.834812] sunxi-mmc 1c11000.sdmmc: sdc set ios: clk 52000000Hz bm PP pm
ON vdd 7 width 8 timing MMC-HS200 dt B
[ 2.848815] hidraw: raw HID events driver (C) Jiri Kosina
[ 2.860059] sunxi-mmc 1c11000.sdmmc: *All wait r1 rdy 1 ms*
[ 2.866177] sunxi-mmc 1c11000.sdmmc: sdc set ios: clk 50000000Hz bm PP pm
ON vdd 7 width 8 timing MMC-HS(SDR20) dt B
[ 2.878136] sunxi-mmc 1c11000.sdmmc: sdc set ios: clk 52000000Hz bm PP pm
ON vdd 7 width 8 timing MMC-HS(SDR20) dt B
[ 2.889933] mmc0: Check switch ready sunxi_mmc_check_timing_switch_done
[ 2.898044] sunxi-mmc 1c11000.sdmmc: *All wait r1 rdy 0 ms*
[ 2.912762] input: Logitech USB Receiver as
/devices/soc.0/1c1b000.ehci1-controller/usb1/1-1/1-1.3/1-1.3:1.0/input/input1
[ 2.920045] sunxi-mmc 1c11000.sdmmc: *All wait r1 rdy 1 ms*
[ 2.920076] sunxi-mmc 1c11000.sdmmc: sdc set ios: clk 50000000Hz bm PP pm
ON vdd 7 width 8 timing MMC-HS400 dt B
[ 2.920136] sunxi-mmc 1c11000.sdmmc: sdc set ios: clk 100000000Hz bm PP pm
ON vdd 7 width 8 timing MMC-HS400 dt B
[ 2.920155] mmc0: Check switch ready sunxi_mmc_check_timing_switch_done
[ 2.961944] hid-generic 0003:046D:C534.0001: input,hidraw0: USB HID v1.11
Keyboard [Logitech USB Receiver] on usb-sunxi-ehci-1.3/input0
[ 2.980047] sunxi-mmc 1c11000.sdmmc: *All wait r1 rdy 1 ms*
[ 2.986278] mmc0: new HS400 MMC card at address 0001
[ 2.993055] mmcblk0: mmc0:0001 AGND3R 14.5 GiB
[ 2.998794] mmcblk0boot0: mmc0:0001 AGND3R partition 1 4.00 MiB
[ 3.006122] mmcblk0boot1: mmc0:0001 AGND3R partition 2 4.00 MiB
[ 3.013309] input: Logitech USB Receiver as
/devices/soc.0/1c1b000.ehci1-controller/usb1/1-1/1-1.3/1-1.3:1.1/input/input2
[ 3.026901] mmcblk0: p1 p2 p3 < p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15
p16 >
[ 3.034910] mmcblk0: p1 size 25815450 extends beyond EOD, truncated
[ 3.042202] hid-generic 0003:046D:C534.0002: input,hiddev0,hidraw1: USB
HID v1.11 Mouse [Logitech USB Receiver] on usb-sunxi-ehci-1.3/input1
[ 3.056493] usbcore: registered new interface driver usbhid
[ 3.060031] sunxi-mmc 1c11000.sdmmc: *All wait r1 rdy 1 ms*
[ 3.060541] mmcblk0boot1: unknown partition table
[ 3.061466] sunxi-mmc 1c11000.sdmmc: *All wait r1 rdy 0 ms*
[ 3.061919] mmcblk0boot0: unknown partition table
[ 3.085693] usbhid: USB HID core driver
[ 3.090842] zram: Created 1 device(s) ...
[ 3.096704] ashmem: initialized
[ 3.111272] sunxi-codec-machine sound.7: codec-aif1 <->
1c22c00.i2s0-controller mapping ok
[ 3.121168] sunxi-codec-machine sound.7: codec-aif2 <-> bb-dai mapping ok
[ 3.129165] sunxi-codec-machine sound.7: codec-aif2 <-> bb-dai mapping ok
[ 3.137430] sunxi-codec-machine sound.7: codec-aif3 <-> bb-dai mapping ok
[ 3.148628] input: audiocodec sunxi Audio Jack as
/devices/soc.0/sound.7/sound/card0/input3
[ 3.160575] sndhdmi sound.8: sndhdmi <-> 1c22800.daudio mapping ok
[ 3.160883] sunxi-mmc 1c10000.sdmmc: smc 2 p1 err, cmd 52, RTO !!
[ 3.161705] sunxi-mmc 1c10000.sdmmc: smc 2 p1 err, cmd 52, RTO !!
[ 3.161722] sunxi-mmc 1c10000.sdmmc: sdc set ios: clk 400000Hz bm PP pm ON
vdd 21 width 1 timing LEGACY(SDR12) dt B
[ 3.164838] sunxi-mmc 1c10000.sdmmc: sdc set ios: clk 400000Hz bm PP pm ON
vdd 21 width 1 timing LEGACY(SDR12) dt B
[ 3.166739] sunxi-mmc 1c10000.sdmmc: smc 2 p1 err, cmd 8, RTO !!
[ 3.167558] sunxi-mmc 1c10000.sdmmc: smc 2 p1 err, cmd 5, RTO !!
[ 3.168376] sunxi-mmc 1c10000.sdmmc: smc 2 p1 err, cmd 5, RTO !!
[ 3.169193] sunxi-mmc 1c10000.sdmmc: smc 2 p1 err, cmd 5, RTO !!
[ 3.170015] sunxi-mmc 1c10000.sdmmc: smc 2 p1 err, cmd 5, RTO !!
[ 3.170848] sunxi-mmc 1c10000.sdmmc: smc 2 p1 err, cmd 55, RTO !!
[ 3.171666] sunxi-mmc 1c10000.sdmmc: smc 2 p1 err, cmd 55, RTO !!
[ 3.172483] sunxi-mmc 1c10000.sdmmc: smc 2 p1 err, cmd 55, RTO !!
[ 3.173301] sunxi-mmc 1c10000.sdmmc: smc 2 p1 err, cmd 55, RTO !!
[ 3.173316] sunxi-mmc 1c10000.sdmmc: sdc set ios: clk 400000Hz bm OD pm ON
vdd 21 width 1 timing LEGACY(SDR12) dt B
[ 3.174165] sunxi-mmc 1c10000.sdmmc: smc 2 p1 err, cmd 1, RTO !!
[ 3.174180] sunxi-mmc 1c10000.sdmmc: sdc set ios: clk 0Hz bm OD pm OFF vdd
0 width 1 timing LEGACY(SDR12) dt B
[ 3.295812] u32 classifier
[ 3.298769] Actions configured
[ 3.302607] Netfilter messages via NETLINK v0.30.
[ 3.307842] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[ 3.315182] ctnetlink v0.93: registering with nfnetlink.
[ 3.322912] NF_TPROXY: Transparent proxy support initialized, version 4.1.0
[ 3.330680] NF_TPROXY: Copyright (c) 2006-2007 BalaBit IT Ltd.
[ 3.338346] xt_time: kernel timezone is -0000
[ 3.343314] ipip: IPv4 over IPv4 tunneling driver
[ 3.349532] gre: GRE over IPv4 demultiplexor driver
[ 3.354977] ip_gre: GRE over IPv4 tunneling driver
[ 3.362600] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 3.368798] arp_tables: (C) 2002 David S. Miller
[ 3.374163] TCP: bic registered
[ 3.377588] TCP: cubic registered
[ 3.381332] TCP: westwood registered
[ 3.385231] TCP: htcp registered
[ 3.388750] Initializing XFRM netlink socket
[ 3.393985] NET: Registered protocol family 10
[ 3.401331] mip6: Mobile IPv6
[ 3.404637] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 3.411206] sit: IPv6 over IPv4 tunneling driver
[ 3.417643] NET: Registered protocol family 17
[ 3.422669] NET: Registered protocol family 15
[ 3.428096] Bluetooth: RFCOMM TTY layer initialized
[ 3.433564] Bluetooth: RFCOMM socket layer initialized
[ 3.439171] Bluetooth: RFCOMM ver 1.11
[ 3.443430] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 3.449227] Bluetooth: BNEP filters: protocol multicast
[ 3.455145] Bluetooth: BNEP socket layer initialized
[ 3.460680] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
[ 3.467168] Bluetooth: HIDP socket layer initialized
[ 3.473526] Registering SWP/SWPB emulation handler
[ 3.479029] sunxi_bootup_extend_init: bootup extend state 1
[ 3.487016] [DISP] boot_disp:0x40a
[ 3.491697] [HDMI] power vcc-hdmi-33
[ 3.496082] [HDMI] cec support = 1
[ 4.013152] [DISP] disp_device_attached,line:94:attched ok,
mgr0<-->device0, type=4
[ 4.022238] tv_ac200_init: ac200 disable, skip init
[ 4.028443] usb_serial_number:20080411
[ 4.033109] [sw_udc]: alloc request: ep(0xffffffc000c83a10, ep0, 64),
req(0xffffffc0686af440)
[ 4.042613] [sw_udc]: sunxi_udc_set_selfpowered_2320: usb device is not
active
[ 4.050651] [sw_udc]: sunxi_udc_pullup, is_on = 0
[ 4.055787] [sw_udc]: sunxi_udc_set_pullup_2337: usb device is not active
[ 4.063657] file system registered
[ 4.071233] android_usb gadget: Mass Storage Function, version: 2009/09/11
[ 4.078745] android_usb gadget: Number of LUNs=3
[ 4.084054] lun0: LUN: removable file: (no medium)
[ 4.089378] lun1: LUN: removable file: (no medium)
[ 4.094885] lun2: LUN: removable file: (no medium)
[ 4.101354] [sw_udc]: sunxi_udc_set_selfpowered_2320: usb device is not
active
[ 4.109247] android_usb gadget: android_usb ready
[ 4.114602] [sw_udc]: [sunxi_usb_udc]: binding gadget driver 'android_usb'
[ 4.122433] sunxi-rtc 1f00000.rtc: setting system clock to 2010-01-01
00:00:09 UTC (1262304009)
[ 4.133331] input: sunxi-ths as /devices/virtual/input/input4
[ 4.140308] thermal thermal_zone0: failed to read out thermal zone 0
[ 4.155894] ALSA device list:
[ 4.159144] #0: audiocodec
[ 4.162406] #1: sndhdmi
[ 4.165845] Freeing unused kernel memory: 556K (ffffffc000aea000 -
ffffffc000b75000)
[ 4.186618] SELinux: 2048 avtab hash slots, 4592 rules.
[ 4.197439] SELinux: 2048 avtab hash slots, 4592 rules.
[ 4.203382] SELinux: 1 users, 2 roles, 384 types, 0 bools, 1 sens, 1024
cats
[ 4.211319] SELinux: 86 classes, 4592 rules
[ 4.218647] SELinux: Completing initialization.
[ 4.223942] SELinux: Setting up existing superblocks.
[ 4.229571] SELinux: initialized (dev sysfs, type sysfs), uses
genfs_contexts
[ 4.237613] SELinux: initialized (dev rootfs, type rootfs), uses
genfs_contexts
[ 4.245887] SELinux: initialized (dev bdev, type bdev), not configured for
labeling
[ 4.254403] SELinux: initialized (dev proc, type proc), uses genfs_contexts
[ 4.262151] SELinux: initialized (dev tmpfs, type tmpfs), uses transition
SIDs
[ 4.270192] SELinux: initialized (dev devtmpfs, type devtmpfs), uses
transition SIDs
[ 4.279160] SELinux: initialized (dev debugfs, type debugfs), uses
genfs_contexts
[ 4.304780] SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
[ 4.312521] SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
[ 4.320164] SELinux: initialized (dev anon_inodefs, type anon_inodefs),
not configured for labeling
[ 4.330221] SELinux: initialized (dev devpts, type devpts), uses
transition SIDs
[ 4.338325] SELinux: initialized (dev selinuxfs, type selinuxfs), uses
genfs_contexts
[ 4.347228] SELinux: initialized (dev configfs, type configfs), not
configured for labeling
[ 4.356511] SELinux: initialized (dev tmpfs, type tmpfs), uses transition
SIDs
[ 4.364559] SELinux: initialized (dev sysfs, type sysfs), uses
genfs_contexts
[ 4.445938] type=1403 audit(1262304009.810:2): policy loaded
auid=4294967295 ses=4294967295
[ 4.459334] type=1404 audit(1262304009.820:3): enforcing=1 old_enforcing=0
auid=4294967295 ses=4294967295
[ 4.560037]
[ 4.560037]
[ 4.560037] rmmod_host_driver
[ 4.560037]
[ 4.568130] hci: ERR: sunxi_ehci is disable, can not disable again
[ 4.575144] hci: ERR: sunxi_ohci is disable, can not disable again
[ 4.582018]
[ 4.582018]
[ 4.582018] insmod_host_driver
[ 4.582018]
[ 4.590336] [ehci0-controller]: sunxi_usb_enable_ehci
[ 4.595855] [sunxi-ehci0]: probe, pdev->name: 1c1a000.ehci0-controller,
sunxi_ehci: 0xffffffc000dde940, 0x:ffffff80000a6000, irq_no:68
[ 4.609442] sunxi-ehci 1c1a000.ehci0-controller: SW USB2.0 'Enhanced' Host
Controller (EHCI) Driver
[ 4.619590] sunxi-ehci 1c1a000.ehci0-controller: new USB bus registered,
assigned bus number 3
[ 4.621264] init: /init.sun50iw1p1.rc: 195: invalid service name
'jide_kernelmsg_dumper'
[ 4.621777] init: could not import file 'init.debug.rc' from
'init.common.rc'
[ 4.646893] sunxi-ehci 1c1a000.ehci0-controller: irq 104, io mem 0x00000001
[ 4.670063] sunxi-ehci 1c1a000.ehci0-controller: USB 0.0 started, EHCI 1.00
[ 4.677825] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[ 4.685534] usb usb3: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 4.693591] usb usb3: Product: SW USB2.0 'Enhanced' Host Controller (EHCI)
Driver
[ 4.701923] usb usb3: Manufacturer: Linux 3.10.87 ehci_hcd
[ 4.707921] usb usb3: SerialNumber: sunxi-ehci
[ 4.713997] hub 3-0:1.0: USB hub found
[ 4.718138] hub 3-0:1.0: 1 port detected
[ 4.722959] scene_lock_init name=ehci_standby
[ 4.727728] [ohci0-controller]: sunxi_usb_enable_ohci
[ 4.733625] [sunxi-ohci0]: probe, pdev->name: 1c1a000.ohci0-controller,
sunxi_ohci: 0xffffffc000dde460
[ 4.744066] sunxi-ohci 1c1a000.ohci0-controller: SW USB2.0 'Open' Host
Controller (OHCI) Driver
[ 4.753795] sunxi-ohci 1c1a000.ohci0-controller: new USB bus registered,
assigned bus number 4
[ 4.763483] sunxi-ohci 1c1a000.ohci0-controller: irq 105, io mem
0xffffffc0007a5888
[ 4.834146] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 4.841969] usb usb4: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 4.850043] usb usb4: Product: SW USB2.0 'Open' Host Controller (OHCI)
Driver
[ 4.857852] usb usb4: Manufacturer: Linux 3.10.87 ohci_hcd
[ 4.864573] usb usb4: SerialNumber: sunxi-ohci
[ 4.870542] hub 4-0:1.0: USB hub found
[ 4.874684] hub 4-0:1.0: 1 port detected
[ 4.879334] scene_lock_init name=ohci_standby
[ 4.884551] host_chose finished 86!
[ 5.028498] init: /dev/hw_random not found
[ 5.033234] keychord: using input dev Logitech USB Receiver for fevent
[ 5.040499] keychord: using input dev Logitech USB Receiver for fevent
[ 5.047638] keychord: using input dev audiocodec sunxi Audio Jack for
fevent
[ 5.056942] init: /sys/class/switch/cvbs/state is not exist[ 5.057840]
SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
[ 5.058563] SELinux: initialized (dev tmpfs, type tmpfs), uses transition
SIDs
[ 5.063101] SELinux: initialized (dev tmpfs, type tmpfs), uses transition
SIDs
[ 5.063563] SELinux: initialized (dev tmpfs, type tmpfs), uses transition
SIDs
[ 5.066411] SELinux: initialized (dev cgroup, type cgroup), uses
genfs_contexts
[ 5.068747] SELinux: initialized (dev pstore, type pstore), uses
genfs_contexts
[ 5.075354] FIVM init
[ 5.075357] FIVM device register ok
[ 5.092965] [NAND]Failed to insmod nand!!!
[ 5.113839] init: /dev/hw_random not found
[ 5.114416] init: get_disp_policy: for modify configs.
init: The device is not low memory 1985[ 5.146922] sunxi-mmc
1c11000.sdmmc: *All wait r1 rdy 0 ms*
[ 5.147502] init: [fswatcherd] 20150814
[ 5.147885] type=1400 audit(1262304010.510:4): avc: denied { getattr }
for pid=1626 comm="fswatcherd" path="/dev/block/mmcblk0p9" dev="tmpfs"
ino=5173 scontext=u:r:ueventd:s0 tcontext=u:object_r:block_device:s0
tclass=blk_file permissive=0
[ 5.186573] EXT4-fs (mmcblk0p7): mounted filesystem with ordered data
mode. Opts: (null)
[ 5.195882] SELinux: initialized (dev mmcblk0p7, type ext4), uses xattr
[ 5.203409] fs_mgr:
__mount(source=/dev/block/by-name/system,target=/system,type=ext4)=0
[ 5.213358] EXT4-fs (mmcblk0p16): Ignoring removed nomblk_io_submit option
[ 5.226260] EXT4-fs (mmcblk0p16): mounted filesystem with ordered data
mode. Opts: nomblk_io_submit,errors=remount-ro
[ 5.238417] SELinux: initialized (dev mmcblk0p16, type ext4), uses xattr
[ 5.245976] fs_mgr: check_fs():
mount(/dev/block/by-name/cache,/cache,ext4)=0
[ 5.256059] fs_mgr: Running /system/bin/e2fsck on /dev/block/by-name/cache
[ 5.301342] e2fsck: e2fsck 1.42.9 (28-Dec-2013)
[ 5.306333] e2fsck: /dev/block/by-name/cache: clean, 29/49152 files,
6393/196608 blocks
[ 5.316299] EXT4-fs (mmcblk0p16): Ignoring removed nomblk_io_submit option
[ 5.328726] EXT4-fs (mmcblk0p16): mounted filesystem with ordered data
mode. Opts: nomblk_io_submit,barrier=1
[ 5.340061] SELinux: initialized (dev mmcblk0p16, type ext4), uses xattr
[ 5.347482] fs_mgr:
__mount(source=/dev/block/by-name/cache,target=/cache,type=ext4)=0
[ 5.356571] fs_mgr: check_fs():
mount(/dev/block/by-name/alog,/logger,ext4)=-1
[ 5.364743] fs_mgr: begin to format ext4 buffer :
/dev/block/mmcblk0p12fs_mgr: finish format to ext4:
/dev/block/mmcblk0p12fs_mgr: Running /system/bin/e2fsck on
/dev/block/by-name/alog
[ 5.507800] e2fsck: e2fsck 1.42.9 (28-Dec-2013)
[ 5.512897] e2fsck: /dev/block/by-name/alog: clean, 11/4096 files,
1294/16384 blocks
[ 5.522450] EXT4-fs (mmcblk0p12): Ignoring removed nomblk_io_submit option
[ 5.535418] EXT4-fs (mmcblk0p12): mounted filesystem with ordered data
mode. Opts: nomblk_io_submit,barrier=1
[ 5.546729] SELinux: initialized (dev mmcblk0p12, type ext4), uses xattr
[ 5.554238] fs_mgr:
__mount(source=/dev/block/by-name/alog,target=/logger,type=ext4)=0
[ 5.564350] EXT4-fs (mmcblk0p1): Ignoring removed nomblk_io_submit option
[ 5.577577] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data
mode. Opts: nomblk_io_submit,errors=remount-ro
[ 5.589320] SELinux: initialized (dev mmcblk0p1, type ext4), uses xattr
[ 5.596776] fs_mgr: check_fs():
mount(/dev/block/by-name/UDISK,/data,ext4)=0
[ 5.606269] fs_mgr: Running /system/bin/e2fsck on /dev/block/by-name/UDISK
[ 5.641724] e2fsck: e2fsck 1.42.9 (28-Dec-2013)
[ 5.646945] e2fsck: /dev/block/by-name/UDISK: clean, 9534/806256 files,
1702931/3218739 blocks
[ 5.657874] EXT4-fs (mmcblk0p1): Ignoring removed nomblk_io_submit option
[ 5.671057] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data
mode. Opts: nomblk_io_submit,barrier=1,noauto_da_alloc
[ 5.683558] SELinux: initialized (dev mmcblk0p1, type ext4), uses xattr
[ 5.691039] fs_mgr:
__mount(source=/dev/block/by-name/UDISK,target=/data,type=ext4)=0
[ 5.704975] FAT-fs (mmcblk0p13): Volume was not properly unmounted. Some
data may be corrupt. Please run fsck.
[ 5.716136] SELinux: initialized (dev mmcblk0p13, type vfat), uses
genfs_contexts
[ 5.729631] FAT-fs (mmcblk0p13): Volume was not properly unmounted. Some
data may be corrupt. Please run fsck.
[ 5.740786] SELinux: initialized (dev mmcblk0p13, type vfat), uses
genfs_contexts
[ 5.749240] fs_mgr:
__mount(source=/dev/block/by-name/Reserve0,target=/mnt/Reserve0,type=vfat)=0
[ 5.782505] Adding 163836k swap on /dev/block/zram0. Priority:-1
extents:1 across:163836k SS
[ 5.799174] enter tr_probe
[ 5.802382] exit tr_probe
[ 5.865945] Mali: Set gpu frequency to 552 MHz
[ 5.871023] Mali: Init Mali gpu clocks successfully
[ 5.881176] gpu cooling callback register Success
[ 5.886318] Mali: Mali device driver loaded
[ 5.925769] usbcore: registered new interface driver snd-usb-audio
[ 5.990799] SELinux: initialized (dev fuse, type fuse), uses genfs_contexts
[ 6.050252] init: single_display_policy exit@@@@@@[ 6.100212] init:
untracked pid 1582 exited with status 0
[ 6.117031] binder: 1665:1665 transaction failed 29189, size 0-0
[ 6.137452] input: sunxi-keyboard as /devices/virtual/input/input5
[ 6.146245] keychord: using input dev sunxi-keyboard for fevent
[ 6.148217] type=1400 audit(1262304011.520:5): avc: denied { getattr }
for pid=1626 comm="fswatcherd" path="/dev/block/mmcblk0p9" dev="tmpfs"
ino=5173 scontext=u:r:ueventd:s0 tcontext=u:object_r:block_device:s0
tclass=blk_file permissive=0
[ 6.150066] gpu cooling callback set freq limit 0
[ 6.165706] logd.auditd: start
[ 6.180464] SELinux: initialized (dev tmpfs, type tmpfs), uses transition
SIDs
[ 6.180697] SELinux: initialized (dev tmpfs, type tmpfs), uses transition
SIDs
[ 6.209380] get ctp_para failed, -1
[ 6.213565] get node gsensor failed
[ 6.217439] get sysconfig para erro!
[ 6.220988] Registered IR keymap rc_map_sunxi
[ 6.221831] input: sunxi-ir as /devices/soc.0/1f02000.s_cir/rc/rc0/input6
[ 6.234125] get node lightsensor failed
[ 6.234388] rc0: sunxi-ir as /devices/soc.0/1f02000.s_cir/rc/rc0
[ 6.245325] get sysconfig para erro!
[ 6.246284] input: MCE IR Keyboard/Mouse (sunxi-rc-recv) as
/devices/virtual/input/input7
[ 6.258931] get node gyroscopesensor failed
[ 6.264258] keychord: using input dev MCE IR Keyboard/Mouse
(sunxi-rc-recv) for fevent
[ 6.264292] get sysconfig para erro!
[ 6.264363] get node compasssensor failed
[ 6.264365] get sysconfig para erro!
[ 6.264393] wakeup gpio set err!
gpio_pin_1(360) gpio_is_valid
[ 6.298987] gpio_pin_2(361) gpio_is_valid
[ 6.304653] gpio name is PL8, ret = 0
[ 6.309722] gpio name is PL9, ret = 0
[ 6.314972] gpio_init finish with uesd
[ 6.320127] get node ctp failed
[ 6.324315] get sysconfig para erro!
[ 6.355027] usbcore: registered new interface driver uvcvideo
[ 6.361464] USB Video Class driver (1.1.1)
[ 6.368697] KERNEL_INIT_COMPLETEinit: Warning! Service multi_ir needs a
SELinux domain defined; please fix!
[ 6.395237] init: Warning! Service systemmixservice needs a SELinux
domain defined; please fix!
[ 6.406096] init: Warning! Service isomountmanager needs a SELinux domain
defined; please fix!
[ 6.416814] init: Warning! Service gpio needs a SELinux domain defined;
please fix!
[ 6.426618] init: Warning! Service securefile needs a SELinux domain
defined; please fix!
[ 6.484640] android_usb: already disabled
[ 6.493026] input: sunxi-ir-uinput as /devices/virtual/input/input8
[ 6.495214] adb_open
[ 6.495220] adb_bind_config
[ 6.495238] [sw_udc]: alloc request: ep(0xffffffc000c83b10, ep1out-bulk,
512), req(0xffffffc0674bb740)
[ 6.495271] [sw_udc]: alloc request: ep(0xffffffc000c83a90, ep1in-bulk,
512), req(0xffffffc0674bb6c0)
[ 6.495306] [sw_udc]: alloc request: ep(0xffffffc000c83a90, ep1in-bulk,
512), req(0xffffffc0674bb640)
[ 6.495343] [sw_udc]: alloc request: ep(0xffffffc000c83a90, ep1in-bulk,
512), req(0xffffffc0674bb5c0)
[ 6.495378] [sw_udc]: alloc request: ep(0xffffffc000c83a90, ep1in-bulk,
512), req(0xffffffc0674bb540)
[ 6.495411] [sw_udc]: sunxi_udc_pullup, is_on = 1
[ 6.495414] [sw_udc]: sunxi_udc_set_pullup_2337: usb device is not active
[ 6.571385] keychord: using input dev sunxi-ir-uinput for fevent
[ 7.152617] type=1400 audit(1262304012.510:6): avc: denied { getattr } for
pid=1626 comm="fswatcherd" path="/dev/block/mmcblk0p9" dev="tmpfs" ino=5173
scontext=u:r:ueventd:s0 tcontext=u:object_r:block_device:s0 tclass=blk_file
permissive=0
[ 7.645883] alloc_contig_range test_pages_isolated(aee39, af622) failed
[ 8.072250] type=1400 audit(1262304013.440:7): avc: denied { execute } for
pid=1746 comm="install-recover" name="toolbox_static" dev="rootfs" ino=4189
scontext=u:r:install_recovery:s0 tcontext=u:object_r:rootfs:s0 tclass=file
permissive=0
[ 8.149282] type=1400 audit(1262304013.510:8): avc: denied { getattr } for
pid=1626 comm="fswatcherd" path="/dev/block/mmcblk0p9" dev="tmpfs" ino=5173
scontext=u:r:ueventd:s0 tcontext=u:object_r:block_device:s0 tclass=blk_file
permissive=0
[ 8.669770] SELinux: initialized (dev tmpfs, type tmpfs), uses transition
SIDs
[ 9.149612] type=1400 audit(1262304014.510:9): avc: denied { getattr } for
pid=1626 comm="fswatcherd" path="/dev/block/mmcblk0p9" dev="tmpfs" ino=5173
scontext=u:r:ueventd:s0 tcontext=u:object_r:block_device:s0 tclass=blk_file
permissive=0
[ 10.149818] init: [fswatcherd] /dev/block/mmcblk0p9 can't be accessed!
[ 10.157338] type=1400 audit(1262304015.510:10): avc: denied { getattr }
for pid=1626 comm="fswatcherd" path="/dev/block/mmcblk0p9" dev="tmpfs"
ino=5173 scontext=u:r:ueventd:s0 tcontext=u:object_r:block_device:s0
tclass=blk_file permissive=0
[ 10.181361] init: [fswatcherd] No crash since last boot!
[ 10.187690] init: [fswatcherd] get_fs_device mmcblk0p1
[ 10.193866] type=1400 audit(1262304015.550:11): avc: denied { read } for
pid=1626 comm="fswatcherd" name="mmcblk0p9" dev="tmpfs" ino=5173
scontext=u:r:ueventd:s0 tcontext=u:object_r:block_device:s0 tclass=blk_file
permissive=0
[ 10.193870] init: [fswatcherd] fs is mounted!
[ 10.221413] type=1400 audit(1262304015.570:12): avc: denied { read } for
pid=1626 comm="fswatcherd" name="lost+found" dev="mmcblk0p1" ino=11
scontext=u:r:ueventd:s0 tcontext=u:object_r:system_data_file:s0 tclass=dir
permissive=0
[ 10.280618] warning: `main' uses 32-bit capabilities (legacy support in
use)
[ 12.152416] healthd: battery l=0 v=0 t=30.0 h=2 st=2 c=0 chg=au
[ 45.455020] SELinux: initialized (dev tmpfs, type tmpfs), uses transition
SIDs
[ 67.126079] healthd: battery l=0 v=0 t=30.0 h=2 st=2 c=0 chg=au
[ 84.488914] init: Warning! Service preinstall needs a SELinux domain
defined; please fix!
[ 84.511577] healthd: battery l=0 v=0 t=30.0 h=2 st=2 c=0 chg=au
[ 84.815418] lowmemorykiller: lowmem_shrink: convert oom_adj to
oom_score_adj:
[ 84.823810] lowmemorykiller: oom_adj 0 => oom_score_adj 0
[ 84.829762] lowmemorykiller: oom_adj 1 => oom_score_adj 58
[ 84.836015] lowmemorykiller: oom_adj 2 => oom_score_adj 117
[ 84.842250] lowmemorykiller: oom_adj 3 => oom_score_adj 176
[ 84.848372] lowmemorykiller: oom_adj 9 => oom_score_adj 529
[ 84.854728] lowmemorykiller: oom_adj 15 => oom_score_adj 1000
[ 85.120302] alloc_contig_range test_pages_isolated(b0e2a, b1613) failed
[ 85.137608] alloc_contig_range test_pages_isolated(b1614, b1dfd) failed
[ 127.126156] healthd: battery l=0 v=0 t=30.0 h=2 st=2 c=0 chg=au
[ 164.140178] CPU Budget:update CPU 0 cpufreq max to 1104000 min to 480000
[ 164.160135] CPU Budget hotplug: cluster0 min:0 max:4
[ 165.162668] CPU Budget hotplug: cluster0 min:0 max:4
[ 187.126209] healthd: battery l=0 v=0 t=30.0 h=2 st=2 c=0 chg=au
[ 207.160130] CPU Budget:update CPU 0 cpufreq max to 1104000 min to 480000
[ 207.170205] CPU Budget hotplug: cluster0 min:0 max:4
[ 207.672636] CPU Budget hotplug: cluster0 min:0 max:4
[ 209.670186] CPU Budget:update CPU 0 cpufreq max to 1104000 min to 480000
[ 209.687832] CPU Budget hotplug: cluster0 min:0 max:4
[ 210.192739] CPU Budget hotplug: cluster0 min:0 max:4
[ 212.190157] CPU Budget:update CPU 0 cpufreq max to 1104000 min to 480000
[ 212.204171] CPU Budget hotplug: cluster0 min:0 max:4
[ 213.702701] CPU Budget hotplug: cluster0 min:0 max:4
[ 215.700164] CPU Budget:update CPU 0 cpufreq max to 1104000 min to 480000
[ 215.710405] CPU Budget hotplug: cluster0 min:0 max:4
[ 217.712573] CPU Budget hotplug: cluster0 min:0 max:4
[ 233.710160] CPU Budget:update CPU 0 cpufreq max to 1104000 min to 480000
[ 233.730145] CPU Budget hotplug: cluster0 min:0 max:4
[ 234.732681] CPU Budget hotplug: cluster0 min:0 max:4
[ 236.730159] CPU Budget:update CPU 0 cpufreq max to 1104000 min to 480000
[ 236.750145] CPU Budget hotplug: cluster0 min:0 max:4
[ 238.752601] CPU Budget hotplug: cluster0 min:0 max:4
[ 246.750132] CPU Budget:update CPU 0 cpufreq max to 1104000 min to 480000
[ 246.760126] CPU Budget hotplug: cluster0 min:0 max:4
[ 247.126210] healthd: battery l=0 v=0 t=30.0 h=2 st=2 c=0 chg=au
[ 247.262533] CPU Budget hotplug: cluster0 min:0 max:4
[ 257.260190] CPU Budget:update CPU 0 cpufreq max to 1104000 min to 480000
[ 257.272118] CPU Budget hotplug: cluster0 min:0 max:4
[ 259.272696] CPU Budget hotplug: cluster0 min:0 max:4
[ 275.270176] CPU Budget:update CPU 0 cpufreq max to 1104000 min to 480000
[ 275.289120] CPU Budget hotplug: cluster0 min:0 max:4
[ 280.792596] CPU Budget hotplug: cluster0 min:0 max:4
[ 282.459606] acc_open
[ 282.462243] acc_release
[ 282.550427] type=1400 audit(1262304287.920:13): avc: denied { search } for
pid=2063 comm="Binder_1" name="4139" dev="proc" ino=4548
scontext=u:r:mediaserver:s0 tcontext=u:r:system_server:s0 tclass=dir
permissive=0
[ 282.572118] type=1400 audit(1262304287.920:14): avc: denied { search } for
pid=2063 comm="Binder_1" name="4139" dev="proc" ino=4548
scontext=u:r:mediaserver:s0 tcontext=u:r:system_server:s0 tclass=dir
permissive=0
[ 282.593550] type=1400 audit(1262304287.920:15): avc: denied { search } for
pid=2063 comm="Binder_1" name="4139" dev="proc" ino=4548
scontext=u:r:mediaserver:s0 tcontext=u:r:system_server:s0 tclass=dir
permissive=0
[ 282.622579] type=1400 audit(1262304287.920:16): avc: denied { search } for
pid=2063 comm="Binder_1" name="4139" dev="proc" ino=4548
scontext=u:r:mediaserver:s0 tcontext=u:r:system_server:s0 tclass=dir
permissive=0
[ 282.645632] type=1400 audit(1262304287.930:17): avc: denied { search } for
pid=2063 comm="Binder_1" name="4139" dev="proc" ino=4548
scontext=u:r:mediaserver:s0 tcontext=u:r:system_server:s0 tclass=dir
permissive=0
[ 282.667794] type=1400 audit(1262304287.930:18): avc: denied { search } for
pid=2063 comm="Binder_1" name="4139" dev="proc" ino=4548
scontext=u:r:mediaserver:s0 tcontext=u:r:system_server:s0 tclass=dir
permissive=0
[ 282.689982] type=1400 audit(1262304287.930:19): avc: denied { search } for
pid=2063 comm="Binder_1" name="4139" dev="proc" ino=4548
scontext=u:r:mediaserver:s0 tcontext=u:r:system_server:s0 tclass=dir
permissive=0
[ 282.711808] type=1400 audit(1262304287.940:20): avc: denied { search } for
pid=2063 comm="Binder_1" name="4139" dev="proc" ino=4548
scontext=u:r:mediaserver:s0 tcontext=u:r:system_server:s0 tclass=dir
permissive=0
[ 282.734241] type=1400 audit(1262304287.940:21): avc: denied { search } for
pid=2063 comm="Binder_1" name="4139" dev="proc" ino=4548
scontext=u:r:mediaserver:s0 tcontext=u:r:system_server:s0 tclass=dir
permissive=0
[ 282.756241] type=1400 audit(1262304287.940:22): avc: denied { search } for
pid=2063 comm="Binder_1" name="4139" dev="proc" ino=4548
scontext=u:r:mediaserver:s0 tcontext=u:r:system_server:s0 tclass=dir
permissive=0
[ 282.779920] type=1400 audit(1262304287.940:23): avc: denied { search } for
pid=2063 comm="Binder_1" name="4139" dev="proc" ino=4548
scontext=u:r:mediaserver:s0 tcontext=u:r:system_server:s0 tclass=dir
permissive=0
[ 282.801830] type=1400 audit(1262304287.950:24): avc: denied { search } for
pid=2063 comm="Binder_1" name="4139" dev="proc" ino=4548
scontext=u:r:mediaserver:s0 tcontext=u:r:system_server:s0 tclass=dir
permissive=0
[ 282.823375] type=1400 audit(1262304287.950:25): avc: denied { search } for
pid=2063 comm="Binder_1" name="4139" dev="proc" ino=4548
scontext=u:r:mediaserver:s0 tcontext=u:r:system_server:s0 tclass=dir
permissive=0
[ 282.844843] type=1400 audit(1262304287.950:26): avc: denied { search } for
pid=2063 comm="Binder_1" name="4139" dev="proc" ino=4548
scontext=u:r:mediaserver:s0 tcontext=u:r:system_server:s0 tclass=dir
permissive=0
[ 282.866625] type=1400 audit(1262304287.960:27): avc: denied { search } for
pid=2063 comm="Binder_1" name="4139" dev="proc" ino=4548
scontext=u:r:mediaserver:s0 tcontext=u:r:system_server:s0 tclass=dir
permissive=0
[ 282.890545] type=1400 audit(1262304287.960:28): avc: denied { search } for
pid=2063 comm="Binder_1" name="4139" dev="proc" ino=4548
scontext=u:r:mediaserver:s0 tcontext=u:r:system_server:s0 tclass=dir
permissive=0
[ 282.912021] type=1400 audit(1262304287.960:29): avc: denied { search } for
pid=2063 comm="Binder_1" name="4139" dev="proc" ino=4548
scontext=u:r:mediaserver:s0 tcontext=u:r:system_server:s0 tclass=dir
permissive=0
[ 282.933216] type=1400 audit(1262304287.970:30): avc: denied { search } for
pid=2063 comm="Binder_1" name="4139" dev="proc" ino=4548
scontext=u:r:mediaserver:s0 tcontext=u:r:system_server:s0 tclass=dir
permissive=0
[ 282.954432] type=1400 audit(1262304287.970:31): avc: denied { search } for
pid=2063 comm="Binder_1" name="4139" dev="proc" ino=4548
scontext=u:r:mediaserver:s0 tcontext=u:r:system_server:s0 tclass=dir
permissive=0
[ 282.975927] type=1400 audit(1262304287.980:32): avc: denied { search } for
pid=2063 comm="Binder_1" name="4139" dev="proc" ino=4548
scontext=u:r:mediaserver:s0 tcontext=u:r:system_server:s0 tclass=dir
permissive=0
[ 282.997285] type=1400 audit(1262304287.980:33): avc: denied { search } for
pid=2063 comm="Binder_1" name="4139" dev="proc" ino=4548
scontext=u:r:mediaserver:s0 tcontext=u:r:system_server:s0 tclass=dir
permissive=0
[ 283.018499] type=1400 audit(1262304288.010:34): avc: denied { search } for
pid=2063 comm="Binder_1" name="4139" dev="proc" ino=4548
scontext=u:r:mediaserver:s0 tcontext=u:r:system_server:s0 tclass=dir
permissive=0
[ 283.183060] libphy: 1c30000.eth: probed
[ 283.188818] sunxi-gmac 1c30000.eth eth0: eth0: PHY ID 00441400 at 0 IRQ
poll (1c30000.eth-0:00)
[ 283.350304] RTL871X: module init start
[ 283.354430] RTL871X: rtl8723bs v4.3.16_13854.20150410_BTCOEX20150119-5844
[ 283.362397] RTL871X: build time: Nov 26 2015 21:41:05
[ 283.368085] RTL871X: rtl8723bs BT-Coex version = BTCOEX20150119-5844
[ 283.376700] sunxi-wlan wlan.32: bus_index: 1
[ 283.382347] sunxi-wlan wlan.32: check wlan wlan_power voltage: 3300000
[ 283.391363] sunxi-wlan wlan.32: check wlan io_regulator voltage: 3300000
[ 283.512543] sunxi-mmc 1c10000.sdmmc: sdc set ios: clk 0Hz bm PP pm UP vdd
21 width 1 timing LEGACY(SDR12) dt B
[ 283.513691] RTL871X: module init ret=0
[ 283.528317] sunxi-mmc 1c10000.sdmmc: no vqmmc,Check if there is regulator
[ 283.550107] sunxi-mmc 1c10000.sdmmc: sdc set ios: clk 400000Hz bm PP pm ON
vdd 21 width 1 timing LEGACY(SDR12) dt B
[ 283.581104] sunxi-mmc 1c10000.sdmmc: smc 2 p1 err, cmd 52, RTO !!
[ 283.588787] sunxi-mmc 1c10000.sdmmc: smc 2 p1 err, cmd 52, RTO !!
[ 283.595896] sunxi-mmc 1c10000.sdmmc: sdc set ios: clk 400000Hz bm PP pm ON
vdd 21 width 1 timing LEGACY(SDR12) dt B
[ 283.611688] sunxi-mmc 1c10000.sdmmc: sdc set ios: clk 400000Hz bm PP pm ON
vdd 21 width 1 timing LEGACY(SDR12) dt B
[ 283.626091] sunxi-mmc 1c10000.sdmmc: smc 2 p1 err, cmd 8, RTO !!
[ 283.633484] sunxi-mmc 1c10000.sdmmc: sdc set ios: clk 400000Hz bm PP pm ON
vdd 16 width 1 timing LEGACY(SDR12) dt B
[ 283.658526] sunxi-mmc 1c10000.sdmmc: sdc set ios: clk 400000Hz bm PP pm ON
vdd 16 width 1 timing SD-HS(SDR25) dt B
[ 283.670611] sunxi-mmc 1c10000.sdmmc: sdc set ios: clk 50000000Hz bm PP pm
ON vdd 16 width 1 timing SD-HS(SDR25) dt B
[ 283.682984] sunxi-mmc 1c10000.sdmmc: sdc set ios: clk 50000000Hz bm PP pm
ON vdd 16 width 4 timing SD-HS(SDR25) dt B
[ 283.706245] mmc2: new high speed SDIO card at address 0001
[ 283.780215] RTL871X: rtw_ndev_init(wlan0)
[ 283.810458] RTL871X: rtw_ndev_init(p2p0)
[ 285.457794] IPv6: ADDRCONF(NETDEV_UP): p2p0: link is not ready
[ 285.754152] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 286.790117] CPU Budget:update CPU 0 cpufreq max to 1104000 min to 480000
[ 286.802122] CPU Budget hotplug: cluster0 min:0 max:4
[ 287.155379] CPU Budget hotplug: cluster0 min:0 max:4
[ 287.161692] CPU Budget:update CPU 0 cpufreq max to 1104000 min to 480000
[ 287.169640] init: boost open /sys/block/nandd/queue/read_ahead_kb fail,No
such file or directory!
[ 287.180753] init: boost open /sys/block/nando/queue/read_ahead_kb fail,No
such file or directory!
[ 287.192360] init: boost open /sys/block/nandd/queue/read_ahead_kb fail,No
such file or directory!
[ 287.202662] init: boost open /sys/block/nando/queue/read_ahead_kb fail,No
such file or directory!
[ 287.215685] BOOT_COMPLETE[ 287.300451] CPU Budget hotplug: cluster0 min:0
max:4
[ 289.300187] CPU Budget:update CPU 0 cpufreq max to 1104000 min to 480000
[ 289.310702] CPU Budget hotplug: cluster0 min:0 max:4
[ 290.262322] init: [fswatcherd] boot completed, clear last crash message!
[ 290.270584] init: [fswatcherd] clear_crash_message failed!
[ 290.271044] type=1400 audit(1262304295.640:35): avc: denied { read } for
pid=1626 comm="fswatcherd" name="mmcblk0p9" dev="tmpfs" ino=5173
scontext=u:r:ueventd:s0 tcontext=u:object_r:block_device:s0 tclass=blk_file
permissive=0
[ 290.271183] type=1400 audit(1262304295.640:36): avc: denied { write } for
pid=1626 comm="fswatcherd" name="mmcblk0p9" dev="tmpfs" ino=5173
scontext=u:r:ueventd:s0 tcontext=u:object_r:block_device:s0 tclass=blk_file
permissive=0
[ 297.320496] CPU Budget hotplug: cluster0 min:0 max:4
[ 297.664289] RTL871X: rtw_set_802_11_connect(wlan0) fw_state=0x00000008
[ 297.744276] RTL871X: start auth
[ 297.749768] RTL871X: auth success, start assoc
[ 297.763755] RTL871X: assoc success
[ 297.768502] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 297.782888] RTL871X: send eapol packet
[ 297.800734] RTL871X: send eapol packet
[ 297.805315] RTL871X: set pairwise key camid:4, addr:ac:22:0b:8d:dc:6c,
kid:0, type:AES
[ 297.822878] RTL871X: set group key camid:5, addr:ac:22:0b:8d:dc:6c, kid:1,
type:AES
[ 299.340185] CPU Budget:update CPU 0 cpufreq max to 1104000 min to 480000
[ 299.356683] CPU Budget hotplug: cluster0 min:0 max:4
[ 299.951598] CPU3: shutdown
[ 299.954589] psci: CPU3 killed.
[ 300.151461] CPU2: shutdown
[ 300.154463] psci: CPU2 killed.
[ 300.370409] CPU Budget hotplug: cluster0 min:0 max:4
[ 301.022418] nf_conntrack: automatic helper assignment is deprecated and it
will be removed soon. Use the iptables CT target to attach helpers instead.
[ 300.160913] CPU2: Booted secondary processor
[ 300.160913] CPU2: update cpu_power 1968128
[ 299.961069] CPU3: Booted secondary processor
[ 299.961069] CPU3: update cpu_power 1968128
[ 304.370166] CPU Budget:update CPU 0 cpufreq max to 1104000 min to 480000
[ 304.390177] CPU Budget hotplug: cluster0 min:0 max:4
[ 307.126282] healthd: battery l=0 v=0 t=30.0 h=2 st=2 c=0 chg=au
[ 311.390503] CPU Budget hotplug: cluster0 min:0 max:4
init: unkwon magic init: unkwon magic
[ 311.736826] CPU Budget hotplug: cluster0 min:0 max:4
[ 313.390184] CPU Budget:update CPU 0 cpufreq max to 1104000 min to 480000
[ 313.410194] CPU Budget hotplug: cluster0 min:0 max:4
[ 314.551450] CPU3: shutdown
[ 314.554436] psci: CPU3 killed.
[ 314.910407] CPU Budget hotplug: cluster0 min:0 max:4
[ 314.953598] CPU2: shutdown
[ 314.956582] psci: CPU2 killed.
[ 314.963057] CPU2: Booted secondary processor
[ 314.963057] CPU2: update cpu_power 1968128
[ 316.901975] init: untracked pid 8097 killed by signal 9
[ 317.351467] CPU1: shutdown
[ 317.354455] psci: CPU1 killed.
[ 317.360917] CPU1: Booted secondary processor
[ 317.360917] CPU1: update cpu_power 1968128
[ 314.560917] CPU3: Booted secondary processor
[ 314.560917] CPU3: update cpu_power 1968128
[ 320.910155] CPU Budget:update CPU 0 cpufreq max to 1104000 min to 480000
[ 320.924299] CPU Budget hotplug: cluster0 min:0 max:4
[ 325.151498] CPU2: shutdown
[ 325.154491] psci: CPU2 killed.
[ 325.351479] CPU1: shutdown
[ 325.354487] psci: CPU1 killed.
[ 325.420449] CPU Budget hotplug: cluster0 min:0 max:4
[ 325.360927] CPU1: Booted secondary processor
[ 325.360927] CPU1: update cpu_power 1968128
[ 325.160948] CPU2: Booted secondary processor
[ 325.160948] CPU2: update cpu_power 1968128
[ 328.551204] CPU2: shutdown
[ 328.554191] psci: CPU2 killed.
[ 328.751411] CPU1: shutdown
[ 328.754420] psci: CPU1 killed.
[ 328.760865] CPU1: Booted secondary processor
[ 328.760865] CPU1: update cpu_power 1968128
[ 328.560666] CPU2: Booted secondary processor
[ 328.560666] CPU2: update cpu_power 1968128
[ 329.946114] sunxi-bt bt.33: block state already is 1
[ 330.152495] sunxi-bt bt.33: set block: 0
[ 330.157066] sunxi-bt bt.33: check bluetooth bt_power voltage: 3300000
[ 330.165163] sunxi-bt bt.33: check bluetooth io_regulator voltage: 3300000
[ 331.551151] CPU3: shutdown
[ 331.554144] psci: CPU3 killed.
[ 331.751239] CPU2: shutdown
[ 331.754226] psci: CPU2 killed.
[ 331.760675] CPU2: Booted secondary processor
[ 331.760675] CPU2: update cpu_power 1968128
[ 331.560622] CPU3: Booted secondary processor
[ 331.560622] CPU3: update cpu_power 1968128
[ 337.420176] CPU Budget:update CPU 0 cpufreq max to 1104000 min to 480000
[ 337.430414] CPU Budget hotplug: cluster0 min:0 max:4
[ 338.430463] CPU Budget hotplug: cluster0 min:0 max:4
[ 340.430135] CPU Budget:update CPU 0 cpufreq max to 1104000 min to 480000
[ 340.441819] CPU Budget hotplug: cluster0 min:0 max:4
[ 340.940456] CPU Budget hotplug: cluster0 min:0 max:4
[ 341.351500] CPU3: shutdown
[ 341.356517] psci: CPU3 killed.
[ 341.360955] CPU3: Booted secondary processor
[ 341.360955] CPU3: update cpu_power 1968128
[ 346.201897] binder: 9015:9027 refcount change on invalid ref 21
[ 346.275355] binder: 9015:9343 refcount change on invalid ref 21
[ 346.282184] binder: 9015:9343 refcount change on invalid ref 21
[ 346.289004] binder: transaction release 55454 bad handle 21
[ 346.551463] CPU1: shutdown
[ 346.554787] psci: CPU1 killed.
[ 346.560901] CPU1: Booted secondary processor
[ 346.560901] CPU1: update cpu_power 1968128
[ 347.463490] binder: 9015:9027 refcount change on invalid ref 42
[ 347.472156] binder: 9015:9343 refcount change on invalid ref 42
[ 347.478680] binder: 9015:9343 refcount change on invalid ref 42
[ 347.485522] binder: transaction release 57226 bad handle 42
[ 348.152219] CPU3: shutdown
[ 348.155488] psci: CPU3 killed.
[ 348.351338] CPU1: shutdown
[ 348.354308] psci: CPU1 killed.
[ 348.360781] CPU1: Booted secondary processor
[ 348.360781] CPU1: update cpu_power 1968128
[ 349.751338] CPU2: shutdown
[ 349.754327] psci: CPU2 killed.
[ 349.760770] CPU2: Booted secondary processor
[ 349.760770] CPU2: update cpu_power 1968128
[ 351.552436] CPU2: shutdown
[ 351.555461] psci: CPU2 killed.
[ 351.753017] CPU1: shutdown
[ 351.756746] psci: CPU1 killed.
[ 351.761685] CPU1: Booted secondary processor
[ 351.761685] CPU1: update cpu_power 1968128
[ 357.152588] CPU1: shutdown
[ 357.155626] psci: CPU1 killed.
[ 367.127366] healthd: battery l=0 v=0 t=30.0 h=2 st=2 c=0 chg=au
[ 357.161695] CPU1: Booted secondary processor
[ 357.161695] CPU1: update cpu_power 1968128
[ 351.561507] CPU2: Booted secondary processor
[ 351.561507] CPU2: update cpu_power 1968128
[ 348.161252] CPU3: Booted secondary processor
[ 348.161252] CPU3: update cpu_power 1968128
[ 371.152944] CPU3: shutdown
[ 371.155974] psci: CPU3 killed.
[ 371.351365] CPU2: shutdown
[ 371.354868] psci: CPU2 killed.
[ 371.552334] CPU1: shutdown
[ 371.555376] psci: CPU1 killed.
[ 371.561406] CPU1: Booted secondary processor
[ 371.561406] CPU1: update cpu_power 1968128
[ 375.952248] CPU1: shutdown
[ 375.955271] psci: CPU1 killed.
--
※ 發信站: 批踢踢實業坊(ptt.cc), 來自: 220.135.147.49
※ 文章網址: https://www.ptt.cc/bbs/AndroidDev/M.1453985712.A.604.html