大家好，想請問有關於單極性PWM漏電流問題
看了幾篇paper，用PSIM模擬了我的想法結果都跟paper出來的結果不一樣
我覺得我錯的地方是不清楚，除了PWM的四個IGBT，多出的兩個，要怎麼接控制訊號
以AC bypass方法來說，paper(PV併網)都會講下列的話，無法體悟到，煩請大家解惑
The operating principle is now explained for a switching period
in the postive grid half cycle, when grid voltage and current are
positives. In the positive grid half cyle, T5 is on. During the
period of time ton=dT T1 and T4 are on.
類似這樣，反之就是negative grid half cycle, T6 is on.
想請問有讀過的人 可以煩請指點一下嗎 謝謝......
--
※ 發信站: 批踢踢實業坊(ptt.cc), 來自: 140.113.186.245
※ 文章網址: https://www.ptt.cc/bbs/Electronics/M.1482126582.A.451.html