[請益] 請教有關工業工程的問題

[a11070125 (一定要嗎)]

代po

(求助)
我是心理學背景，現在美國修商業碩士，因為想了解project management選修了這堂課，
搞慘自己。有大神念工業工程可以幫我解答以下問題嗎? ! 謝謝

1. The design team was charged with a Cpk = 1.1 and Nominal of 10 mm for a des
igned part. They measured 30 parts from one of their vendors, and found the av
erage was 10 mm and the standards deviation was 1. What should they set their
specifications to ? Specifications= 10 +/- ______________
2. A design of experiment is to be performed on 5 factors and two levels. How
many experiments do you need to do? Please specify the orthogonal experiment,
using the nomenclature Lx.
Full factorial _32 _ 1/2 factorial (half Fraction) _16_ Saturated (Screening D
esign). _6__ (這題答案我知道，只是不知道為什麼, 主要是 "Please specify the ort
hogonal experiment, using the nomenclature Lx." 不知道教授是想要我用甚麼形式回
答)

3. For each decade, list the one major change to EPM and the design or MFG too
l most influential in the decade. Please limit yourself to one paragraph, max
6 lines:
8. 2010s Major Change __________________ Most influential Tool _____________ (
2010s好新啊! 在這學期之前我完全沒注意這領域啊，網路上找不到需要的資料, 只有200
0s前的，可能是我不會打關鍵字, 拜託解答)

感恩！！！

--
※ 發信站: 批踢踢實業坊(ptt.cc), 來自: 223.140.125.231
※ 文章網址: https://www.ptt.cc/bbs/graduate/M.1488766487.A.25F.html
推 ga2006197730: 應該去研所問題版(?
→ wugo: 這是在哪間學校的呢？
推 hotlin0709: 第一題應該是正負3.3
推 hotlin0709: Cpk=（規格上界或下界-平均）/3倍標
→ a11070125: 謝謝大家的回覆！